am32-firmware · AlkaMotors · Nov 8, 2024 · Oct 29, 2024
diff --git a/Inc/common.h b/Inc/common.h
@@ -1,8 +1,10 @@
-#pragma once
+#include <stdint.h>
+#include "eeprom.h"
 
+#pragma once
 
+extern EEprom_t eepromBuffer;
 extern uint32_t eeprom_address;
-extern uint8_t eepromBuffer[176];
 extern uint16_t TIMER1_MAX_ARR;
 extern uint16_t dshot_frametime_high;
 extern uint16_t dshot_frametime_low;

diff --git a/Inc/dshot.h b/Inc/dshot.h
@@ -21,7 +21,6 @@ extern void saveEEpromSettings(void);
 extern char dshot_telemetry;
 extern char armed;
 extern char dir_reversed;
-extern char bi_direction;
 extern char buffer_divider;
 extern uint8_t last_dshot_command;
 extern uint32_t commutation_interval;

diff --git a/Inc/eeprom.h b/Inc/eeprom.h
@@ -0,0 +1,62 @@
+#include "main.h"
+
+#pragma once
+
+typedef union EEprom_u {
+    struct {
+        uint8_t reserved_0; //0
+        uint8_t eeprom_version; //1
+        uint8_t reserved_1; //2
+        struct {        
+            uint8_t major; //3
+            uint8_t minor; //4
+        } version;
+        char firmware_name[12]; //5-16
+        uint8_t dir_reversed; // 17
+        uint8_t bi_direction; // 18
+        uint8_t use_sine_start; // 19
+        uint8_t comp_pwm; // 20
+        uint8_t variable_pwm; // 21
+        uint8_t stuck_rotor_protection; // 22
+        uint8_t advance_level; // 23
+        uint8_t pwm_frequency; // 24
+        uint8_t startup_power; // 25
+        uint8_t motor_kv; // 26
+        uint8_t motor_poles; // 27
+        uint8_t brake_on_stop; // 28
+        uint8_t stall_protection; // 29
+        uint8_t beep_volume; // 30
+        uint8_t telementry_on_interval; // 31
+        struct {
+            uint8_t low_threshold; // 32
+            uint8_t high_threshold; // 33
+            uint8_t neutral; // 34
+            uint8_t dead_band; // 35
+        } servo;
+        uint8_t low_voltage_cut_off; // 36
+        uint8_t low_cell_volt_cutoff; // 37
+        uint8_t rc_car_reverse; // 38
+        uint8_t use_hall_sensors; // 39
+        uint8_t sine_mode_changeover_thottle_level; // 40
+        uint8_t drag_brake_strength; // 41
+        uint8_t driving_brake_strength; // 42
+        struct {
+            uint8_t temperature; // 43
+            uint8_t current; // 44
+        } limits;
+        uint8_t sine_mode_power; // 45
+        uint8_t input_type; // 46
+        uint8_t auto_advance; // 47
+        uint8_t reserved_2[4]; //48-51
+        uint8_t tune[124]; // 52-175
+    };
+    uint8_t buffer[184];
+} EEprom_t;
+
+extern EEprom_t eepromBuffer;
+
+// void save_to_flash(uint8_t *data);
+// void read_flash(uint8_t* data, uint32_t address);
+// void save_to_flash_bin(uint8_t *data, int length, uint32_t add);
+void read_flash_bin(uint8_t* data, uint32_t add, int out_buff_len);
+void save_flash_nolib(uint8_t* data, int length, uint32_t add);
diff --git a/Inc/signal.h b/Inc/signal.h
@@ -8,7 +8,6 @@
 #include "main.h"
 
 extern char out_put;
-extern char bi_direction;
 extern char inputSet;
 extern char dshot;
 extern char servoPwm;

diff --git a/Inc/version.h b/Inc/version.h
@@ -3,3 +3,5 @@
  */
 #define VERSION_MAJOR 2
 #define VERSION_MINOR 16
+
+#define EEPROM_VERSION 2
diff --git a/Mcu/e230/Inc/IO.h b/Mcu/e230/Inc/IO.h
@@ -24,7 +24,6 @@ void setInputPullUp();
 void enableHalfTransferInt();
 void setInputPullNone();
 
-extern char bi_direction;
 extern char inputSet;
 extern char dshot;
 extern char servoPwm;

diff --git a/Mcu/e230/Inc/eeprom.h b/Mcu/e230/Inc/eeprom.h
diff --git a/Mcu/e230/Inc/phaseouts.h b/Mcu/e230/Inc/phaseouts.h
@@ -9,6 +9,7 @@
 #define INC_PHASEOUTS_H_
 
 #include "main.h"
+#include "common.h"
 
 void allOff();
 void comStep(int newStep);

diff --git a/Mcu/e230/Src/phaseouts.c b/Mcu/e230/Src/phaseouts.c
@@ -8,7 +8,6 @@
 
 #include "targets.h"
 
-extern char comp_pwm;
 extern char prop_brake_active;
 
 #ifndef PWM_ENABLE_BRIDGE
@@ -69,7 +68,7 @@ void proportionalBrake()
 
 void phaseBPWM()
 {
-    if (!comp_pwm) { // for future
+    if (!eepromBuffer.comp_pwm) { // for future
         gpio_mode_QUICK(PHASE_B_GPIO_PORT_LOW, GPIO_MODE_OUTPUT, GPIO_PUPD_NONE,
             PHASE_B_GPIO_LOW);
         GPIO_BC(PHASE_B_GPIO_PORT_LOW) = PHASE_B_GPIO_LOW;
@@ -118,7 +117,7 @@ void phaseBLOW()
 
 void phaseCPWM()
 {
-    if (!comp_pwm) {
+    if (!eepromBuffer.comp_pwm) {
         gpio_mode_QUICK(PHASE_C_GPIO_PORT_LOW, GPIO_MODE_OUTPUT, GPIO_PUPD_NONE,
             PHASE_C_GPIO_LOW);
         GPIO_BC(PHASE_C_GPIO_PORT_LOW) = PHASE_C_GPIO_LOW;
@@ -157,7 +156,7 @@ void phaseCLOW()
 
 void phaseAPWM()
 {
-    if (!comp_pwm) {
+    if (!eepromBuffer.comp_pwm) {
         gpio_mode_QUICK(PHASE_A_GPIO_PORT_LOW, GPIO_MODE_OUTPUT, GPIO_PUPD_NONE,
             PHASE_A_GPIO_LOW);
         GPIO_BC(PHASE_A_GPIO_PORT_LOW) = PHASE_A_GPIO_LOW;
@@ -194,7 +193,7 @@ void phaseALOW()
 //////////////////////////////////PHASE 1//////////////////////
 void phaseBPWM()
 {
-    if (!comp_pwm) { // for future
+    if (!eepromBuffer.comp_pwm) { // for future
                      // gpio_mode_QUICK(PHASE_B_GPIO_PORT_LOW, GPIO_MODE_OUTPUT,
                      // GPIO_PUPD_NONE, PHASE_B_GPIO_LOW);
                      // GPIO_BC(PHASE_B_GPIO_PORT_LOW) = PHASE_B_GPIO_LOW;
@@ -233,7 +232,7 @@ void phaseBLOW()
 
 void phaseCPWM()
 {
-    if (!comp_pwm) {
+    if (!eepromBuffer.comp_pwm) {
         //	gpio_mode_QUICK(PHASE_C_GPIO_PORT_LOW, GPIO_MODE_OUTPUT,
         // GPIO_PUPD_NONE,
         // PHASE_C_GPIO_LOW); GPIO_BC(PHASE_C_GPIO_PORT_LOW) = PHASE_C_GPIO_LOW;
@@ -272,7 +271,7 @@ void phaseCLOW()
 
 void phaseAPWM()
 {
-    if (!comp_pwm) {
+    if (!eepromBuffer.comp_pwm) {
         //	gpio_mode_QUICK(PHASE_A_GPIO_PORT_LOW, GPIO_MODE_OUTPUT,
         // GPIO_PUPD_NONE,
         // PHASE_A_GPIO_LOW); GPIO_BC(PHASE_A_GPIO_PORT_LOW) = PHASE_A_GPIO_LOW;

diff --git a/Mcu/f031/Inc/IO.h b/Mcu/f031/Inc/IO.h
@@ -24,7 +24,6 @@ void setInputPullUp();
 void enableHalfTransferInt();
 void setInputPullNone();
 
-extern char bi_direction;
 extern char inputSet;
 extern char dshot;
 extern char servoPwm;

diff --git a/Mcu/f031/Inc/eeprom.h b/Mcu/f031/Inc/eeprom.h
diff --git a/Mcu/f031/Inc/phaseouts.h b/Mcu/f031/Inc/phaseouts.h
@@ -9,6 +9,7 @@
 #define INC_PHASEOUTS_H_
 
 #include "main.h"
+#include "common.h"
 
 void allOff();
 void comStep(int newStep);

diff --git a/Mcu/f031/Src/phaseouts.c b/Mcu/f031/Src/phaseouts.c
@@ -8,7 +8,6 @@
 
 #include "targets.h"
 
-extern char comp_pwm;
 extern char prop_brake_active;
 
 #ifndef PWM_ENABLE_BRIDGE
@@ -61,7 +60,7 @@ void proportionalBrake()
 
 void phaseBPWM()
 {
-    if (!comp_pwm) { // for future
+    if (!eepromBuffer.comp_pwm) { // for future
         LL_GPIO_SetPinMode(PHASE_B_GPIO_PORT_LOW, PHASE_B_GPIO_LOW,
             LL_GPIO_MODE_OUTPUT);
         PHASE_B_GPIO_PORT_LOW->LOW_BITREG_OFF = PHASE_B_GPIO_LOW;
@@ -99,7 +98,7 @@ void phaseBLOW()
 
 void phaseCPWM()
 {
-    if (!comp_pwm) {
+    if (!eepromBuffer.comp_pwm) {
         LL_GPIO_SetPinMode(PHASE_C_GPIO_PORT_LOW, PHASE_C_GPIO_LOW,
             LL_GPIO_MODE_OUTPUT);
         PHASE_C_GPIO_PORT_LOW->LOW_BITREG_OFF = PHASE_C_GPIO_LOW;
@@ -137,7 +136,7 @@ void phaseCLOW()
 
 void phaseAPWM()
 {
-    if (!comp_pwm) {
+    if (!eepromBuffer.comp_pwm) {
         LL_GPIO_SetPinMode(PHASE_A_GPIO_PORT_LOW, PHASE_A_GPIO_LOW,
             LL_GPIO_MODE_OUTPUT);
         PHASE_A_GPIO_PORT_LOW->LOW_BITREG_OFF = PHASE_A_GPIO_LOW;
@@ -174,7 +173,7 @@ void phaseALOW()
 //////////////////////////////////PHASE 1//////////////////////
 void phaseBPWM()
 {
-    if (!comp_pwm) { // for future
+    if (!eepromBuffer.comp_pwm) { // for future
                      // LL_GPIO_SetPinMode(PHASE_B_GPIO_PORT_LOW,
                      // PHASE_B_GPIO_LOW, LL_GPIO_MODE_OUTPUT);
                      // PHASE_B_GPIO_PORT_LOW->LOW_BITREG_OFF = PHASE_B_GPIO_LOW;
@@ -213,7 +212,7 @@ void phaseBLOW()
 
 void phaseCPWM()
 {
-    if (!comp_pwm) {
+    if (!eepromBuffer.comp_pwm) {
         //	LL_GPIO_SetPinMode(PHASE_C_GPIO_PORT_LOW, PHASE_C_GPIO_LOW,
         // LL_GPIO_MODE_OUTPUT); PHASE_C_GPIO_PORT_LOW->LOW_BITREG_OFF =
         // PHASE_C_GPIO_LOW;
@@ -252,7 +251,7 @@ void phaseCLOW()
 
 void phaseAPWM()
 {
-    if (!comp_pwm) {
+    if (!eepromBuffer.comp_pwm) {
         //	LL_GPIO_SetPinMode(PHASE_A_GPIO_PORT_LOW, PHASE_A_GPIO_LOW,
         // LL_GPIO_MODE_OUTPUT); PHASE_A_GPIO_PORT_LOW->LOW_BITREG_OFF =
         // PHASE_A_GPIO_LOW;

diff --git a/Mcu/f051/Inc/IO.h b/Mcu/f051/Inc/IO.h
@@ -24,8 +24,6 @@ void setInputPullUp();
 void enableHalfTransferInt();
 void setInputPullNone();
 
-extern char bi_direction;
-
 extern char send_telemetry;
 extern uint8_t degrees_celsius;
 

diff --git a/Mcu/f051/Inc/eeprom.h b/Mcu/f051/Inc/eeprom.h
diff --git a/Mcu/f051/Inc/phaseouts.h b/Mcu/f051/Inc/phaseouts.h
@@ -9,6 +9,7 @@
 #define INC_PHASEOUTS_H_
 
 #include "main.h"
+#include "common.h"
 
 void allOff();
 void comStep(char newStep);

diff --git a/Mcu/f051/Src/phaseouts.c b/Mcu/f051/Src/phaseouts.c
@@ -8,7 +8,6 @@
 
 #include "targets.h"
 
-extern char comp_pwm;
 extern char prop_brake_active;
 
 #ifndef PWM_ENABLE_BRIDGE
@@ -60,7 +59,7 @@ void proportionalBrake()
 
 void phaseBPWM()
 {
-    if (!comp_pwm) { // for future
+    if (!eepromBuffer.comp_pwm) { // for future
         LL_GPIO_SetPinMode(PHASE_B_GPIO_PORT_LOW, PHASE_B_GPIO_LOW,
             LL_GPIO_MODE_OUTPUT);
         PHASE_B_GPIO_PORT_LOW->LOW_BITREG_OFF = PHASE_B_GPIO_LOW;
@@ -98,7 +97,7 @@ void phaseBLOW()
 
 void phaseCPWM()
 {
-    if (!comp_pwm) {
+    if (!eepromBuffer.comp_pwm) {
         LL_GPIO_SetPinMode(PHASE_C_GPIO_PORT_LOW, PHASE_C_GPIO_LOW,
             LL_GPIO_MODE_OUTPUT);
         PHASE_C_GPIO_PORT_LOW->LOW_BITREG_OFF = PHASE_C_GPIO_LOW;
@@ -136,7 +135,7 @@ void phaseCLOW()
 
 void phaseAPWM()
 {
-    if (!comp_pwm) {
+    if (!eepromBuffer.comp_pwm) {
         LL_GPIO_SetPinMode(PHASE_A_GPIO_PORT_LOW, PHASE_A_GPIO_LOW,
             LL_GPIO_MODE_OUTPUT);
         PHASE_A_GPIO_PORT_LOW->LOW_BITREG_OFF = PHASE_A_GPIO_LOW;
@@ -173,7 +172,7 @@ void phaseALOW()
 //////////////////////////////////PHASE 1//////////////////////
 void phaseBPWM()
 {
-    if (!comp_pwm) { // for future
+    if (!eepromBuffer.comp_pwm) { // for future
                      // LL_GPIO_SetPinMode(PHASE_B_GPIO_PORT_LOW,
                      // PHASE_B_GPIO_LOW, LL_GPIO_MODE_OUTPUT);
                      // PHASE_B_GPIO_PORT_LOW->LOW_BITREG_OFF = PHASE_B_GPIO_LOW;
@@ -212,7 +211,7 @@ void phaseBLOW()
 
 void phaseCPWM()
 {
-    if (!comp_pwm) {
+    if (!eepromBuffer.comp_pwm) {
         //	LL_GPIO_SetPinMode(PHASE_C_GPIO_PORT_LOW, PHASE_C_GPIO_LOW,
         // LL_GPIO_MODE_OUTPUT); PHASE_C_GPIO_PORT_LOW->LOW_BITREG_OFF =
         // PHASE_C_GPIO_LOW;
@@ -251,7 +250,7 @@ void phaseCLOW()
 
 void phaseAPWM()
 {
-    if (!comp_pwm) {
+    if (!eepromBuffer.comp_pwm) {
         //	LL_GPIO_SetPinMode(PHASE_A_GPIO_PORT_LOW, PHASE_A_GPIO_LOW,
         // LL_GPIO_MODE_OUTPUT); PHASE_A_GPIO_PORT_LOW->LOW_BITREG_OFF =
         // PHASE_A_GPIO_LOW;

diff --git a/Mcu/f415/Inc/IO.h b/Mcu/f415/Inc/IO.h
@@ -24,7 +24,6 @@ void setInputPullUp();
 void enableHalfTransferInt();
 void setInputPullNone();
 
-extern char bi_direction;
 extern char inputSet;
 extern char dshot;
 extern char servoPwm;