Alibaba Cloud Managed Kubernetes Cluster Module
terraform-alicloud-managed-kubernetes

A terraform module used to launch a managed kubernetes cluster on Alibaba Cloud.

These types of the module resource are supported:

• VPC
• VSwitch
• EIP
• Nat Gateway
• Snat
• SLS Project
• Managed Kubernetes

Usage

This module used to create a managed kubernetes and it can meet several scenarios by specifying different parameters.

NOTE: This module using AccessKey and SecretKey are from profile and shared_credentials_file. If you have not set them yet, please install aliyun-cli and configure it.

1 Create a new vpc, several new vswitches and a new nat gateway for the cluster.

module "managed-k8s" {
  source             = "terraform-alicloud-modules/managed-kubernetes/alicloud"
  
  k8s_name_prefix = "my-managed-k8s-with-new-vpc"
  cluster_spec    = "ack.pro.small"
  new_vpc         = true
  vpc_cidr        = "192.168.0.0/16"
  vswitch_cidrs   = [
    "192.168.1.0/24",
    "192.168.2.0/24",
    "192.168.3.0/24",
    "192.168.4.0/24",
  ]
}

In this scenario, the module will create a new vpc with vpc_cidr, several vswitches with vswitch_cidrs, a new nat gateway, a new EIP with new_eip_bandwidth and several snat entries for vswitches.

2 Using existing vpc and vswitches by specifying vswitch_ids. Setting new_nat_gateway=true to add a new nat gateway in the vswitches' vpc.

module "managed-k8s" {
  source             = "terraform-alicloud-modules/managed-kubernetes/alicloud"
  
  k8s_name_prefix = "my-managed-k8s-with-new-vpc"
  cluster_spec    = "ack.pro.small"
  new_vpc         = false
  vswitch_ids     = [
    "vsw-12345678",
    "vsw-09876537"
  ]
  new_nat_gateway = true
}

In this scenario, if setting new_nat_gateway=false, you should ensure the specified vswitches can access internet. In other words, the specified vpc has a nat gateway and there are several snat entries to bind the vswitches and a EIP.

Conditional creation

This moudle can set sls project config for this module

1. Create a new sls project with cluster_addons:

    cluster_addons = [
      {
        name   = "flannel",
        config = "",
      },
      {
        name   = "flexvolume",
        config = "",
      },
      {
        name   = "alicloud-disk-controller",
        config = "",
      },
      {
        name   = "logtail-ds",
        config = "{\"IngressDashboardEnabled\":\"true\"}",
      },
      {
        name   = "nginx-ingress-controller",
        config = "{\"IngressSlbNetworkType\":\"internet\"}",
      },
    ]

If you want to store kube config and other certificates after the cluster created, you can set the following parameters:

1. Store kube config with kube_config_path:

   kube_config_path = "/home/xxx/.kube/config"

2. Store more certificates:

   client_cert_path     = "/home/xxx/.kube/client-cert.pem"
   client_key_path      = "/home/xxx/.kube/client-key.pem"
   cluster_ca_cert_path = "/home/xxx/.kube/cluster-ca-cert.pem"
   

Inputs

Name	Description	Type	Default	Required
new_vpc	Create a new vpc for this module	string	false	no
vpc_cidr	The cidr block used to launch a new vpc	string	"192.168.0.0/16"	no
vswitch_ids	List Ids of existing vswitch	string	[]	yes
vswitch_cidrs	List cidr blocks used to create several new vswitches when 'new_vpc' is true	string	["192.168.1.0/24"]	yes
availability_zones	List available zone ids used to create several new vswitches when 'vswitch_ids' is not specified. If not set, data source alicloud_zones will return one automatically.	list	[]	no
new_eip_bandwidth	The bandwidth used to create a new EIP when 'new_vpc' is true	int	50	no
new_nat_gateway	Seting it to true can create a new nat gateway automatically in a existing VPC. If 'new_vpc' is true, it will be ignored	bool	false
cpu_core_count	CPU core count is used to fetch instance types	int	1	no
memory_size	Memory size used to fetch instance types	int	2	no
worker_instance_types	The ecs instance type used to launch worker nodes. If not set, data source alicloud_instance_types will return one based on cpu_core_count and memory_size	list	["ecs.n4.xlarge"]	no
worker_disk_category	The system disk category used to launch one or more worker nodes	string	"cloud_efficiency"	no
worker_disk_size	The system disk size used to launch one or more worker nodes	int	40	no
ecs_password	The password of work nodes	string	"Abc12345"	no
worker_number	The number of kubernetes cluster work nodes	int	2	no
k8s_name_prefix	The name prefix used to create managed kubernetes cluster	string	"terraform-alicloud-managed-kubernetes"	no
k8s_pod_cidr	The kubernetes pod cidr block. It cannot be equals to vpc's or vswitch's and cannot be in them. If vpc's cidr block is 172.16.XX.XX/XX, it had better to 192.168.XX.XX/XX or 10.XX.XX.XX/XX	string	"172.20.0.0/16"	no
k8s_service_cidr	The kubernetes service cidr block. It cannot be equals to vpc's or vswitch's or pod's and cannot be in them. Its setting rule is same as k8s_pod_cidr	string	"172.21.0.0/20"	no
cluster_network_type	Network type, valid options are flannel and terway	string	"flannel"	no
new_sls_project	Create a new sls project for this module	bool	false	no
sls_project_name	Specify a existing sls project for this module	string	""	no
kube_config_path	The path of kube config, like ~/.kube/config	string	""	no
client_cert_path	The path of client certificate, like ~/.kube/client-cert.pem	string	""	no
client_key_path	The path of client key, like ~/.kube/client-key.pem	string	""	no
cluster_ca_cert_path	The path of cluster ca certificate, like ~/.kube/cluster-ca-cert.pem	string	""	no

Outputs

Name	Description
this_k8s_id	The ID of managed kubernetes cluster
this_k8s_name	The name of managed kubernetes cluster
this_k8s_nodes	List worker nodes of managed kubernetes cluster
this_vpc_id	The ID of VPC
this_vswitch_ids	List Ids of vswitches
this_security_group_id	ID of the Security Group used to deploy kubernetes cluster
this_sls_project_name	The sls project name used to configure cluster

Terraform version

Name	Version
terraform	>= 0.12.0
alicloud	>= 1.77.0

Notes

From the version v1.5.0, the module has removed the following provider setting:

provider "alicloud" {
   profile = var.profile != "" ? var.profile : null
   shared_credentials_file = var.shared_credentials_file != "" ? var.shared_credentials_file : null
   region = var.region != "" ? var.region : null
   skip_region_validation = var.skip_region_validation
   configuration_source = "terraform-alicloud-modules/managed-kubernetes"
} 

If you still want to use the provider setting to apply this module, you can specify a supported version, like 1.4.0:

module "managed-kubernetes" {
   source = "terraform-alicloud-modules/managed-kubernetes/alicloud"
   version     = "1.4.0"
   region      = "cn-hangzhou"
   profile     = "Your-Profile-Name"
   k8s_name_prefix = "my-managed-k8s-with-new-vpc"
   new_vpc         = true
   vpc_cidr        = "192.168.0.0/16"
}

If you want to upgrade the module to 1.5.0 or higher in-place, you can define a provider which same region with previous region:

provider "alicloud" {
   region  = "cn-hangzhou"
   profile = "Your-Profile-Name"
}
module "managed-kubernetes" {
  source = "terraform-alicloud-modules/managed-kubernetes/alicloud"
  k8s_name_prefix = "my-managed-k8s-with-new-vpc"
  new_vpc         = true
  vpc_cidr        = "192.168.0.0/16"
}

or specify an alias provider with a defined region to the module using providers:

provider "alicloud" {
  region  = "cn-hangzhou"
  profile = "Your-Profile-Name"
  alias   = "hz"
}
module "managed-kubernetes" {
  source  = "terraform-alicloud-modules/managed-kubernetes/alicloud"
  providers = {
    alicloud = alicloud.hz
  }
   k8s_name_prefix = "my-managed-k8s-with-new-vpc"
   new_vpc         = true
   vpc_cidr        = "192.168.0.0/16"
}

and then run terraform init and terraform apply to make the defined provider effect to the existing module state. More details see How to use provider in the module

Authors

Created and maintained by Alibaba Cloud Terraform Team([email protected])

License

Apache 2 Licensed. See LICENSE for full details.

Reference

• Terraform-Provider-Alicloud Github
• Terraform-Provider-Alicloud Release
• Terraform-Provider-Alicloud Docs