lint: cargo fmt #144
tools.yml
on: push
check-clippy
1m 33s
rustfmt
5s
Matrix: Build and test
Annotations
1 error and 52 warnings
Build and test (--all-features)
Process completed with exit code 101.
|
rustfmt
The following actions uses node12 which is deprecated and will be forced to run on node16: styfle/[email protected], actions/[email protected], actions-rs/[email protected]. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
rustfmt
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
rustfmt
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
rustfmt
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
rustfmt
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
rustfmt
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
rustfmt
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
useless conversion to the same type: `std::collections::hash_map::Values<'_, std::string::String, core::peer::Peer>`:
src/main.rs#L118
warning: useless conversion to the same type: `std::collections::hash_map::Values<'_, std::string::String, core::peer::Peer>`
--> src/main.rs:118:49
|
118 | let mut connectable_peers = site
| _________________________________________________^
119 | | .peers
120 | | .values()
121 | | .into_iter()
| |____________________________________^
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#useless_conversion
help: consider removing `.into_iter()`
|
118 ~ let mut connectable_peers = site
119 + .peers
120 + .values()
|
|
this let-binding has unit value:
src/plugins/websocket/mod.rs#L540
warning: this let-binding has unit value
--> src/plugins/websocket/mod.rs:540:9
|
540 | / let _ = self.ws_controller.do_send(ServerEvent::Notification {
541 | | cmd: "notification".to_string(),
542 | | id,
543 | | params,
544 | | });
| |___________^
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#let_unit_value
help: omit the `let` binding
|
540 ~ self.ws_controller.do_send(ServerEvent::Notification {
541 + cmd: "notification".to_string(),
542 + id,
543 + params,
544 + });
|
|
this let-binding has unit value:
src/plugins/websocket/mod.rs#L530
warning: this let-binding has unit value
--> src/plugins/websocket/mod.rs:530:9
|
530 | / let _ = self.ws_controller.do_send(ServerEvent::Event {
531 | | id: self.next_message_id,
532 | | cmd: event_name.to_string(),
533 | | params: event,
534 | | });
| |___________^
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#let_unit_value
= note: `#[warn(clippy::let_unit_value)]` on by default
help: omit the `let` binding
|
530 ~ self.ws_controller.do_send(ServerEvent::Event {
531 + id: self.next_message_id,
532 + cmd: event_name.to_string(),
533 + params: event,
534 + });
|
|
length comparison to zero:
src/plugins/websocket/mod.rs#L515
warning: length comparison to zero
--> src/plugins/websocket/mod.rs:515:20
|
515 | if params.len() > 0 {
| ^^^^^^^^^^^^^^^^ help: using `!is_empty` is clearer and more explicit: `!params.is_empty()`
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#len_zero
|
length comparison to zero:
src/plugins/websocket/mod.rs#L505
warning: length comparison to zero
--> src/plugins/websocket/mod.rs:505:20
|
505 | if params.len() > 0 {
| ^^^^^^^^^^^^^^^^ help: using `!is_empty` is clearer and more explicit: `!params.is_empty()`
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#len_zero
= note: `#[warn(clippy::len_zero)]` on by default
|
this expression creates a reference which is immediately dereferenced by the compiler:
src/plugins/websocket/mod.rs#L500
warning: this expression creates a reference which is immediately dereferenced by the compiler
--> src/plugins/websocket/mod.rs:500:55
|
500 | let site_info = append_user_site_data(&self, &mut site_info).unwrap();
| ^^^^^ help: change this to: `self`
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_borrow
|
unneeded `return` statement:
src/plugins/websocket/mod.rs#L396
warning: unneeded `return` statement
--> src/plugins/websocket/mod.rs:396:9
|
396 | return Ok(());
| ^^^^^^^^^^^^^
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_return
help: remove `return`
|
396 - return Ok(());
396 + Ok(())
|
|
unneeded `return` statement:
src/plugins/websocket/mod.rs#L338
warning: unneeded `return` statement
--> src/plugins/websocket/mod.rs:338:17
|
338 | return Ok(());
| ^^^^^^^^^^^^^
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_return
help: remove `return`
|
338 - return Ok(());
338 + Ok(())
|
|
unneeded `return` statement:
src/plugins/websocket/mod.rs#L334
warning: unneeded `return` statement
--> src/plugins/websocket/mod.rs:334:17
|
334 | return Ok(());
| ^^^^^^^^^^^^^
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_return
help: remove `return`
|
334 - return Ok(());
334 + Ok(())
|
|
unneeded `return` statement:
src/plugins/websocket/mod.rs#L330
warning: unneeded `return` statement
--> src/plugins/websocket/mod.rs:330:17
|
330 | return Ok(());
| ^^^^^^^^^^^^^
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_return
help: remove `return`
|
330 - return Ok(());
330 + Ok(())
|
|
useless use of `format!`:
src/plugins/websocket/handlers/sites.rs#L494
warning: useless use of `format!`
--> src/plugins/websocket/handlers/sites.rs:494:20
|
494 | error: format!("Can't change this key"),
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: consider using `.to_string()`: `"Can't change this key".to_string()`
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#useless_format
= note: `#[warn(clippy::useless_format)]` on by default
|
this expression creates a reference which is immediately dereferenced by the compiler:
src/plugins/websocket/handlers/sites.rs#L164
warning: this expression creates a reference which is immediately dereferenced by the compiler
--> src/plugins/websocket/handlers/sites.rs:164:40
|
164 | if accepted_providers.contains(&provider) || accept_any || accepted_pattern_match {
| ^^^^^^^^^ help: change this to: `provider`
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_borrow
|
this expression creates a reference which is immediately dereferenced by the compiler:
src/plugins/websocket/handlers/sites.rs#L157
warning: this expression creates a reference which is immediately dereferenced by the compiler
--> src/plugins/websocket/handlers/sites.rs:157:32
|
157 | regex.is_match(&provider)
| ^^^^^^^^^ help: change this to: `provider`
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_borrow
|
redundant closure:
src/plugins/websocket/handlers/sites.rs#L53
warning: redundant closure
--> src/plugins/websocket/handlers/sites.rs:53:31
|
53 | Some(Box::new(move |ws, cmd| cert_add_confirm(ws, cmd))),
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: replace the closure with the function itself: `cert_add_confirm`
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#redundant_closure
= note: `#[warn(clippy::redundant_closure)]` on by default
|
called `unwrap_err` on `res` after checking its variant with `is_err`:
src/plugins/site_server/media.rs#L26
warning: called `unwrap_err` on `res` after checking its variant with `is_err`
--> src/plugins/site_server/media.rs:26:15
|
25 | if res.is_err() {
| --------------- help: try: `if let Err(..) = res`
26 | match res.unwrap_err() {
| ^^^^^^^^^^^^^^^^
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_unwrap
= note: `#[warn(clippy::unnecessary_unwrap)]` on by default
|
unnecessary map of the identity function:
src/plugins/site_server/handlers/users.rs#L186
warning: unnecessary map of the identity function
--> src/plugins/site_server/handlers/users.rs:186:37
|
186 | .into_iter()
| _____________________________________^
187 | | .map(|(addr, site_data)| (addr, site_data))
| |___________________________________________________________________^ help: remove the call to `map`
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#map_identity
= note: `#[warn(clippy::map_identity)]` on by default
|
redundant pattern matching, consider using `is_some()`:
src/plugins/site_server/handlers/sites.rs#L358
warning: redundant pattern matching, consider using `is_some()`
--> src/plugins/site_server/handlers/sites.rs:358:16
|
358 | if let Some(_) = self.sites.remove(&msg.address) {
| -------^^^^^^^---------------------------------- help: try: `if self.sites.remove(&msg.address).is_some()`
|
= note: this will change drop order of the result, as well as all temporaries
= note: add `#[allow(clippy::redundant_pattern_matching)]` if this is important
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#redundant_pattern_matching
= note: `#[warn(clippy::redundant_pattern_matching)]` on by default
|
non-binding `let` on a future:
src/plugins/site_server/handlers/sites.rs#L195
warning: non-binding `let` on a future
--> src/plugins/site_server/handlers/sites.rs:195:13
|
195 | let _ = self.load_content();
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
= help: consider awaiting the future or dropping explicitly with `std::mem::drop`
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#let_underscore_future
= note: `#[warn(clippy::let_underscore_future)]` on by default
|
use of `default` to create a unit struct:
src/plugins/site_server/common.rs#L90
warning: use of `default` to create a unit struct
--> src/plugins/site_server/common.rs:90:25
|
90 | let mut rand = OsRng::default();
| ^^^^^^^^^^^ help: remove this call to `default`
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#default_constructed_unit_structs
= note: `#[warn(clippy::default_constructed_unit_structs)]` on by default
|
sub-expression diverges:
/rustc/ef71f1047e04438181d7cb925a833e2ada6ab390/library/core/src/macros/mod.rs#L793
warning: sub-expression diverges
--> src/io/site.rs:484:9
|
484 | unimplemented!()
| ^^^^^^^^^^^^^^^^
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#diverging_sub_expression
= note: `#[warn(clippy::diverging_sub_expression)]` on by default
= note: this warning originates in the macro `unimplemented` (in Nightly builds, run with -Z macro-backtrace for more info)
|
useless conversion to the same type: `std::collections::btree_map::Keys<'_, std::string::String, std::string::String>`:
src/io/content.rs#L60
warning: useless conversion to the same type: `std::collections::btree_map::Keys<'_, std::string::String, std::string::String>`
--> src/io/content.rs:60:24
|
60 | let verified = content
| ________________________^
61 | | .signs
62 | | .keys()
63 | | .into_iter()
| |________________________^
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#useless_conversion
= note: `#[warn(clippy::useless_conversion)]` on by default
help: consider removing `.into_iter()`
|
60 ~ let verified = content
61 + .signs
62 + .keys()
|
|
unneeded `return` statement:
src/core/user.rs#L459
warning: unneeded `return` statement
--> src/core/user.rs:459:9
|
459 | / return Some(format!(
460 | | "{}@{}",
461 | | cert.auth_user_name,
462 | | site_data.get_cert_provider().unwrap()
463 | | ));
| |__________^
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_return
= note: `#[warn(clippy::needless_return)]` on by default
help: remove `return`
|
459 ~ Some(format!(
460 + "{}@{}",
461 + cert.auth_user_name,
462 + site_data.get_cert_provider().unwrap()
463 ~ ))
|
|
this expression creates a reference which is immediately dereferenced by the compiler:
src/controllers/sites.rs#L309
warning: this expression creates a reference which is immediately dereferenced by the compiler
--> src/controllers/sites.rs:309:48
|
309 | new_query = re.replace_all(&query, replacement.as_str()).into();
| ^^^^^^ help: change this to: `query`
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_borrow
|
this expression creates a reference which is immediately dereferenced by the compiler:
src/controllers/sites.rs#L306
warning: this expression creates a reference which is immediately dereferenced by the compiler
--> src/controllers/sites.rs:306:45
|
306 | let key = regex::escape(&key);
| ^^^^ help: change this to: `key`
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_borrow
|
this expression creates a reference which is immediately dereferenced by the compiler:
src/controllers/sites.rs#L281
warning: this expression creates a reference which is immediately dereferenced by the compiler
--> src/controllers/sites.rs:281:40
|
281 | new_query = re.replace(&query, &wheres).into();
| ^^^^^^ help: change this to: `query`
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_borrow
= note: `#[warn(clippy::needless_borrow)]` on by default
|
check-clippy
The following actions uses node12 which is deprecated and will be forced to run on node16: styfle/[email protected], actions/[email protected], actions-rs/[email protected], Swatinem/[email protected], actions-rs/clippy-check@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
check-clippy
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
check-clippy
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
check-clippy
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
check-clippy
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
check-clippy
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
check-clippy
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
check-clippy
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
check-clippy
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
check-clippy
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
Build and test (--all-features)
The following actions uses node12 which is deprecated and will be forced to run on node16: styfle/[email protected], actions/[email protected], actions-rs/[email protected], Swatinem/[email protected]. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
Build and test (--all-features)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
Build and test (--all-features)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
Build and test (--all-features)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
Build and test (--all-features)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
Build and test (--all-features)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
Build and test (--all-features)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
Build and test (--all-features)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
Build and test (--all-features)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
Build and test (--all-features)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|