Merge pull request #54 from der-pw/master

adding HBVCam-3M2111_corner-mount

README.md

@@ -49,6 +49,7 @@ like so:
 | catalinutzz| [Hemera mount](./catalinutzz/hemera-mount) | Hemera mount for the VZ Printhead | ✔️ | ✔️ | :green_heart: |
 | ckvsoft    | [CPAP_back_panel_tube_mount_VZ330](./ckvsoft/CPAP_back_panel_tube_mount_VZ330)| CPAP back panel tube mount VZ330. | ✔️ | ✖️ | :green_heart: |
 | ckvsoft    | [WaveShare](./ckvsoft/waveshare_5inch_DSI_LCD)| WaveShare 5inch DSI LCD. | ✔️ | ✔️ | :green_heart: |
+| der-pw    | [HBVCam-3M2111_corner-mount](./der-pw/HBVCam-3M2111_corner-mount)| HBVCam-3M2111 corner-mount | ✖️ | ✔️ | :green_heart: |
 | EduardoMDSousa  | [Vz-Printhead Printed MGN12H](./EduardoMDSousa/Vz-Printhead-Printed-MGN12H) | VzPrinthead Printed MGN12H | ✔️ | ✔️ | :green_heart: |
 | | [Vz-Printhead Printed Standoffs MGN12](./EduardoMDSousa/Vz-Printhead-Printed_Standoffs-MGN12) | Vz-Printhead Printed Standoffs MGN12 | ✔️ | ✔️ | :green_heart: |
 |Glizzynator | [M4_Spool_Holder](./Glizzynator/M4_Spool_Holder)| Modifies the spool holder to use M4 screws instead of M3 | ✔️ | ✔️ | :green_heart: |

der-pw/HBVCam-3M2111_corner-mount/readme.md

@@ -0,0 +1,42 @@
+## Corner bracket mounting for a HVBCam [![License: CC BY-SA 4.0](https://img.shields.io/badge/License-CC%20BY--SA%204.0-lightgrey.svg)](https://creativecommons.org/licenses/by-sa/4.0/)
+
+
+The camera can be mounted in the top left corner. It is possible to lead the cable out backwards in one of the profiles. If you use the HBVCam-3M2111, you have a view angle of 110° and thus a complete overview of the print bed. With this arm, it fits nicely at the Vz235, It is quite possible that it also fits on the Vz330, but untested.
+
+![render of the camera](./images/render.jpg)
+---
+
+You need:
+
+| amount |  | Description
+| --- | --- | ---
+| 5x | 12mm x M2.5 | button head screws
+| 2x | 6mm x M2.5 | button head screws
+| 7x | M2.5 | nuts
+| 1x | M4 | 10mm screw
+| 1x | xxx | slot nut
+
+---
+
+The camera has not the best quality, see for yourself, but it is sufficient for monitoring the printing room.
+
+![Look inside the printer](./images/cam-view.jpg)
+
+---
+
+First screw "Bracket_Part1" to the rear half of the case. Use the M2.5x6 screws for this.
+Then the lens has to be unscrewed. But this is possible without any problems. Then you put the camera in the front housing shell, after that put the lens back on to protect the sensor from dust and specks. Put the rear case shell on and screw both halves tight. Use the M2.5x12 screws. Screw the "Bracket_Part2" to the "Bracket_Part1" using the M2.5x12 screw.
+The case should be finished. Now you can attach the camera into the top left corner of your Vz235.
+
+---
+
+![Look inside the printer](./images/prints.jpg)
+
+---
+
+This contribution was made by [der-pw](https://github.com/der-pw).  
+STEP-File inside, feel free to edit, improve or modify this thing, but respect the [CC BY-SA 4.0](https://creativecommons.org/licenses/by-sa/4.0/) license.
+
+
+
+