Python tools for TWAMP and TWAMP light

Twampy is a Python implementation of the Two-Way Active Measurement Protocol (TWAMP and TWAMP light) as defined in RFC5357. This tool was developed to validate the Nokia SR OS TWAMP implementation.

Supported features

• unauthenticated mode
• IPv4 and IPv6
• Support for DSCP, Padding, JumboFrames, IMIX
• Support to set DF flag (don't fragment)
• Basic Delay, Jitter, Loss statistics (jitter according to RFC1889)

Modes of operation

• TWAMP Controller
• TWAMP Control Client
• TWAMP Test Session Sender
• TWAMP light Reflector

Installation

$ git clone https://github.com/nokia/twampy
Cloning into 'twampy'...

Usage Notes

Use padding to configure bidirectional packet/frame sizes:

IP Version	Padding	Packet Size	Frame Size
IPv4	>=27	Padding+42	Padding+56
IPv6	>=27	Padding+62	Padding+76

Padding default is 27 bytes (to enforce bidirectional behavior).

Use padding value '-1' for IMIX traffic generation:

L2 Size	Packets	Ratio(Packets)	Ratio(Volume)
64	7	58%	10%
590	4	33%	55%
1514	1	8%	35%

TOS/DSCP user settings neet to be enabled on WINDOWS:

1. Open Registry Editor
2. Go to key: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\TcpIp\Parameters
3. Create new DWORD value:

EntryName	Value
DisableUserTOSSetting	0x00000000 (0)

4. Quit Registry Editor

5. Restart you computer

6. Command prompt for validation (capture needed)

   $ ping -v 8

Reference: http://support.microsoft.com/kb/248611

DF flag implementation supports Linux und Windows. To support other Operating Systems such as OS X (darwin) or FreeBSD the according code such as sockopts need to be added and validated.

Possible Improvements

• authenticated and encrypted mode
• sending intervals variation
• enhanced statistics
  • bining and interim statistics
  • late arrived packets
  • smokeping like graphics
  • median on latency
  • improved jitter (rfc3393, statistical variance formula): jitter:=sqrt(SumOf((D[i]-average(D))^2)/ReceivedProbesCount)
• daemon mode: NETCONF/YANG controlled, ...
• enhanced failure handling (catch exceptions)
• per probe time-out for statistics (late arrival)
• Validation with other operating systems (such as FreeBSD)
• Support for RFC 5938 Individual Session Control
• Support for RFC 6038 Reflect Octets Symmetrical Size

Error codes (as per RFC 4656)

Error Code	Description
0	OK
1	Failure, reason unspecified (catch-all).
2	Internal error.
3	Some aspect of request is not supported.
4	Cannot perform request due to permanent resource limitations.
5	Cannot perform request due to temporary resource limitations.

Usage example: getting help

Help on modes of operation:

$ ./twampy.py --help
usage: twampy.py [-h] [-v]
                 {responder,sender,controller,controlclient,dscptable} ...

positional arguments:
  {responder,sender,controller,controlclient,dscptable}
                        twampy sub-commands
    responder           TWL responder
    sender              TWL sender
    controller          TWAMP controller
    controlclient       TWAMP control client
    dscptable           print DSCP table

optional arguments:
  -h, --help            show this help message and exit
  -v, --version         show program's version number and exit

Specific help:

$ ./twampy.py sender --help
usage: twampy.py sender [-h] [-l filename] [-q | -v | -d]
                        [--tos type-of-service] [--dscp dscp-value]
                        [--ttl time-to-live] [--padding bytes]
                        [--do-not-fragment] [-i msec] [-c packets]
                        [remote-ip:port] [local-ip:port]

optional arguments:
  -h, --help            show this help message and exit
  -q, --quiet           disable logging
  -v, --verbose         enhanced logging
  -d, --debug           extensive logging

Debug Options:
  -l filename, --logfile filename
                        Specify the logfile (default: <stdout>)

IP socket options:
  --tos type-of-service        IP TOS value
  --dscp dscp-value            IP DSCP value
  --ttl time-to-live           [1..128]
  --padding bytes              IP/UDP mtu value
  --do-not-fragment            keyword (do-not-fragment)

TWL sender options:
  remote-ip:port
  local-ip:port
  -i msec, --interval msec     [100,1000]
  -c packets, --count packets  [1..9999]

Usage example against SR OS TWAMP server

Router configuration:

A:VSR# configure test-oam
A:VSR>config>test-oam># info
----------------------------------------------
        twamp
            server
                prefix 0.0.0.0/0 create
                exit
                no shutdown
            exit
        exit
----------------------------------------------

Running the test:

$ ./twampy.py controller 192.168.255.2
===============================================================================
Direction         Min         Max         Avg          Jitter     Loss
-------------------------------------------------------------------------------
  Outbound:       92.89ms    196.63ms     95.15ms       576us      0.0%
  Inbound:            0us         0us         0us         0us      0.0%
  Roundtrip:        339us    103.53ms      1.91ms       638us      0.0%
-------------------------------------------------------------------------------
                                                    Jitter Algorithm [RFC1889]
===============================================================================

License

This project is licensed under the BSD-3-Clause license - see the LICENSE.