Skip to content

Latest commit

 

History

History
43 lines (28 loc) · 1.94 KB

File metadata and controls

43 lines (28 loc) · 1.94 KB

Minimum height magnetic tents for the skeletyl keyboard from bastardbk.com

These stl files contain magnetic tents from 5 to 30 degrees, allowing for fast, screw-less tent swapping. You will need the original metal plates from the website for those to fit.

You will need to buy some 8mm x 3mm magnets on the side and simply just press fit them into the print.

NOTE://

  • These tents will slide around on the desk if you have no desktop mat, corke or the like.
  • Even with these mats and even with rubber pads, they are not as steadily fixated as the original. The 15 degree tent is conciderably more unstable than the 5 degree tent for reference.

This project is unlicensed. Do whatever you want with it.

alt text Magnets are press fit into the outer holes. The mid hole is for not hitting a screw on the board. Use 8mm x 3mm magnets. The whole in the middle is just what I had laying around.

alt text Add it to the plat with one quick snap-on.

alt text The top of the tent have matching bumps to ensure perfect lock onto the metal plate

alt text 5 degree tent

alt text 5 degree tent

alt text 5 degree tent

alt text 5 degree tent

alt text 15 degree tent. Note that the tent may work okay-ish without magnets.

alt text Adding pads will ensure better fixation, though still not as good fixation as the original tents with 4 feet.

alt text 15 degree tent.