Merge pull request #62 from Spooks4576/Development

Development

CMakeLists.txt

@@ -132,10 +132,6 @@ if(DEFINED ENV{BLUE_RGB_PIN})
     add_compile_definitions(BLUE_RGB_PIN=$ENV{BLUE_RGB_PIN})
 endif()
 
-if(DEFINED ENV{USE_BIT_BANG_TOUCH})
-    add_compile_definitions(USE_BIT_BANG_TOUCH=$ENV{USE_BIT_BANG_TOUCH})
-endif()
-
 add_compile_definitions(HOLD_LIMIT=1000) # For joystick hold duration
 add_compile_definitions(LED_ORDER=0)     # 2 for RGB, 0 for GRB
 add_compile_definitions(DNS_SERVER_MAX_ITEMS=1)

components/lvgl_esp32_drivers/CMakeLists.txt

@@ -91,10 +91,6 @@ idf_component_register(SRCS ${SOURCES}
 
 target_compile_definitions(${COMPONENT_LIB} PUBLIC "-DLV_LVGL_H_INCLUDE_SIMPLE")
 
-if(DEFINED ENV{USE_BIT_BANG_TOUCH})
-    add_compile_definitions(USE_BIT_BANG_TOUCH=$ENV{USE_BIT_BANG_TOUCH})
-endif()
-
 else()
     message(FATAL_ERROR "LVGL ESP32 drivers: ESP_PLATFORM is not defined. Try reinstalling ESP-IDF.")
 endif()

components/lvgl_esp32_drivers/lvgl_helpers.c

@@ -84,7 +84,7 @@ void lvgl_driver_init(void)
 
 #if defined (SHARED_SPI_BUS)
 #ifndef USE_7_INCHER
-#ifndef USE_BIT_BANG_TOUCH
+#ifndef CONFIG_USE_BIT_BANG_TOUCH
     ESP_LOGI(TAG, "Initializing shared SPI master");
 
     lvgl_spi_driver_init(TFT_SPI_HOST,
@@ -126,7 +126,7 @@ void lvgl_driver_init(void)
     #if defined (CONFIG_LV_TOUCH_DRIVER_PROTOCOL_SPI)
         ESP_LOGI(TAG, "Initializing SPI master for touch");
 
-#ifndef USE_BIT_BANG_TOUCH
+#ifndef CONFIG_USE_BIT_BANG_TOUCH
 
     lvgl_spi_driver_init(TOUCH_SPI_HOST,
         TP_SPI_MISO, TP_SPI_MOSI, TP_SPI_CLK,

components/lvgl_esp32_drivers/lvgl_touch/Kconfig

@@ -165,6 +165,11 @@ menu "LVGL Touch controller"
             prompt "Invert Y coordinate value."
             default y
 
+        config USE_BIT_BANG_TOUCH
+            bool
+            prompt "Should Bit Bash Touch"
+            default n
+
         choice
             prompt "Select touch detection method."
             default LV_TOUCH_DETECT_IRQ

components/lvgl_esp32_drivers/lvgl_touch/xpt2046.c

@@ -74,7 +74,7 @@ void xpt2046_init(void)
 
     esp_err_t ret = gpio_config(&irq_config);
     assert(ret == ESP_OK);
-#elif USE_BIT_BANG_TOUCH
+#elif CONFIG_USE_BIT_BANG_TOUCH
 
     gpio_set_direction(CONFIG_LV_TOUCH_SPI_MOSI, GPIO_MODE_OUTPUT);
     gpio_set_direction(CONFIG_LV_TOUCH_SPI_MISO, GPIO_MODE_INPUT);
@@ -107,7 +107,7 @@ bool xpt2046_read(lv_indev_drv_t * drv, lv_indev_data_t * data)
         y = xpt2046_cmd(CMD_Y_READ);
         ESP_LOGV(TAG, "P(%d,%d)", x, y);
 
-#ifndef USE_BIT_BANG_TOUCH
+#ifndef CONFIG_USE_BIT_BANG_TOUCH
         /*Normalize Data back to 12-bits*/
         x = x >> 4;
         y = y >> 4;
@@ -167,7 +167,7 @@ static xpt2046_touch_detect_t xpt2048_is_touch_detected()
 
 static int16_t xpt2046_cmd(uint8_t cmd)
 {
-#ifdef USE_BIT_BANG_TOUCH
+#ifdef CONFIG_USE_BIT_BANG_TOUCH
     int16_t val = xpt2046_read_spi(cmd);
     return val;
 #else 

configs/sdkconfig.CYDDualUSB

@@ -2424,6 +2424,7 @@ CONFIG_LV_TOUCH_Y_MAX=1900
 CONFIG_LV_TOUCH_XY_SWAP=y
 CONFIG_LV_TOUCH_INVERT_X=y
 # CONFIG_LV_TOUCH_INVERT_Y is not set
+CONFIG_USE_BIT_BANG_TOUCH=y
 # CONFIG_LV_TOUCH_DETECT_IRQ is not set
 CONFIG_LV_TOUCH_DETECT_IRQ_PRESSURE=y
 # CONFIG_LV_TOUCH_DETECT_PRESSURE is not set

configs/sdkconfig.CYDMicroUSB

@@ -2424,6 +2424,7 @@ CONFIG_LV_TOUCH_Y_MAX=1900
 CONFIG_LV_TOUCH_XY_SWAP=y
 CONFIG_LV_TOUCH_INVERT_X=y
 # CONFIG_LV_TOUCH_INVERT_Y is not set
+CONFIG_USE_BIT_BANG_TOUCH=y
 # CONFIG_LV_TOUCH_DETECT_IRQ is not set
 CONFIG_LV_TOUCH_DETECT_IRQ_PRESSURE=y
 # CONFIG_LV_TOUCH_DETECT_PRESSURE is not set
@@ -2732,4 +2733,4 @@ CONFIG_SPI_FLASH_WRITING_DANGEROUS_REGIONS_ABORTS=y
 CONFIG_SUPPRESS_SELECT_DEBUG_OUTPUT=y
 CONFIG_SUPPORT_TERMIOS=y
 CONFIG_SEMIHOSTFS_MAX_MOUNT_POINTS=1
-# End of deprecated options
+# End of deprecated options

sdkconfig

@@ -2302,10 +2302,10 @@ CONFIG_LV_PREDEFINED_DISPLAY_NONE=y
 # CONFIG_LV_PREDEFINED_DISPLAY_TTGO is not set
 # CONFIG_LV_PREDEFINED_DISPLAY_TTGO_CAMERA_PLUS is not set
 # CONFIG_LV_PREDEFINED_DISPLAY_WT32_SC01 is not set
-CONFIG_LV_TFT_DISPLAY_CONTROLLER_ST7735S=y
+CONFIG_LV_TFT_DISPLAY_CONTROLLER_ILI9341=y
 CONFIG_LV_TFT_DISPLAY_PROTOCOL_SPI=y
-CONFIG_LV_HOR_RES_MAX=128
-CONFIG_LV_VER_RES_MAX=128
+CONFIG_LV_HOR_RES_MAX=320
+CONFIG_LV_VER_RES_MAX=240
 CONFIG_LV_DISPLAY_ORIENTATION_PORTRAIT=y
 # CONFIG_LV_DISPLAY_ORIENTATION_PORTRAIT_INVERTED is not set
 # CONFIG_LV_DISPLAY_ORIENTATION_LANDSCAPE is not set
@@ -2316,14 +2316,14 @@ CONFIG_LV_PREDEFINED_PINS_NONE=y
 # CONFIG_LV_PREDEFINED_PINS_30 is not set
 # CONFIG_LV_PREDEFINED_PINS_38V1 is not set
 # CONFIG_LV_PREDEFINED_PINS_TKOALA is not set
-# CONFIG_LV_TFT_DISPLAY_USER_CONTROLLER_ILI9341 is not set
+CONFIG_LV_TFT_DISPLAY_USER_CONTROLLER_ILI9341=y
 # CONFIG_LV_TFT_DISPLAY_USER_CONTROLLER_ILI9481 is not set
 # CONFIG_LV_TFT_DISPLAY_USER_CONTROLLER_ILI9486 is not set
 # CONFIG_LV_TFT_DISPLAY_USER_CONTROLLER_ILI9488 is not set
 # CONFIG_LV_TFT_DISPLAY_USER_CONTROLLER_ST7789 is not set
 # CONFIG_LV_TFT_DISPLAY_USER_CONTROLLER_ST7796S is not set
 # CONFIG_LV_TFT_DISPLAY_USER_CONTROLLER_GC9A01 is not set
-CONFIG_LV_TFT_DISPLAY_USER_CONTROLLER_ST7735S=y
+# CONFIG_LV_TFT_DISPLAY_USER_CONTROLLER_ST7735S is not set
 # CONFIG_LV_TFT_DISPLAY_USER_CONTROLLER_HX8357 is not set
 # CONFIG_LV_TFT_DISPLAY_USER_CONTROLLER_SH1107 is not set
 # CONFIG_LV_TFT_DISPLAY_USER_CONTROLLER_SSD1306 is not set
@@ -2362,46 +2362,74 @@ CONFIG_LV_TFT_SPI_CLK_DIVIDER_2=y
 # CONFIG_LV_TFT_SPI_CLK_DIVIDER_48 is not set
 # CONFIG_LV_TFT_SPI_CLK_DIVIDER_80 is not set
 CONFIG_LV_TFT_CUSTOM_SPI_CLK_DIVIDER=2
-# CONFIG_LV_M5STICKC_HANDLE_AXP192 is not set
-# CONFIG_LV_INVERT_COLORS is not set
+CONFIG_LV_INVERT_COLORS=y
 
 #
 # Display Pin Assignments
 #
-CONFIG_LV_DISP_SPI_MOSI=23
+CONFIG_LV_DISP_SPI_MOSI=13
 CONFIG_LV_DISPLAY_USE_SPI_MISO=y
-CONFIG_LV_DISP_SPI_MISO=19
+CONFIG_LV_DISP_SPI_MISO=12
 CONFIG_LV_DISP_SPI_INPUT_DELAY_NS=0
-CONFIG_LV_DISP_SPI_CLK=18
+CONFIG_LV_DISP_SPI_CLK=14
 CONFIG_LV_DISPLAY_USE_SPI_CS=y
-CONFIG_LV_DISP_SPI_CS=17
+CONFIG_LV_DISP_SPI_CS=15
 CONFIG_LV_DISPLAY_USE_DC=y
-CONFIG_LV_DISP_PIN_DC=16
-CONFIG_LV_DISP_USE_RST=y
-CONFIG_LV_DISP_PIN_RST=5
+CONFIG_LV_DISP_PIN_DC=2
+# CONFIG_LV_DISP_USE_RST is not set
 CONFIG_LV_DISP_PIN_BUSY=35
 # end of Display Pin Assignments
 
 # CONFIG_LV_DISP_BACKLIGHT_OFF is not set
 CONFIG_LV_DISP_BACKLIGHT_SWITCH=y
 # CONFIG_LV_DISP_BACKLIGHT_PWM is not set
 CONFIG_LV_BACKLIGHT_ACTIVE_LVL=y
-CONFIG_LV_DISP_PIN_BCKL=32
+CONFIG_LV_DISP_PIN_BCKL=21
 CONFIG_LV_I2C_DISPLAY_PORT=0
 # end of LVGL TFT Display controller
 
 #
 # LVGL Touch controller
 #
-CONFIG_LV_TOUCH_CONTROLLER=0
-CONFIG_LV_TOUCH_CONTROLLER_NONE=y
-# CONFIG_LV_TOUCH_CONTROLLER_XPT2046 is not set
+CONFIG_LV_TOUCH_CONTROLLER=1
+# CONFIG_LV_TOUCH_CONTROLLER_NONE is not set
+CONFIG_LV_TOUCH_CONTROLLER_XPT2046=y
 # CONFIG_LV_TOUCH_CONTROLLER_FT6X06 is not set
 # CONFIG_LV_TOUCH_CONTROLLER_STMPE610 is not set
 # CONFIG_LV_TOUCH_CONTROLLER_ADCRAW is not set
 # CONFIG_LV_TOUCH_CONTROLLER_FT81X is not set
 # CONFIG_LV_TOUCH_CONTROLLER_RA8875 is not set
 # CONFIG_LV_TOUCH_CONTROLLER_GT911 is not set
+CONFIG_LV_TOUCH_DRIVER_PROTOCOL_SPI=y
+# CONFIG_LV_TOUCH_CONTROLLER_SPI2_HOST is not set
+CONFIG_LV_TOUCH_CONTROLLER_SPI3_HOST=y
+
+#
+# Touchpanel (XPT2046) Pin Assignments
+#
+CONFIG_LV_TOUCH_SPI_MISO=39
+CONFIG_LV_TOUCH_SPI_MOSI=32
+CONFIG_LV_TOUCH_SPI_CLK=25
+CONFIG_LV_TOUCH_SPI_CS=33
+CONFIG_LV_TOUCH_PIN_IRQ=36
+# end of Touchpanel (XPT2046) Pin Assignments
+
+#
+# Touchpanel Configuration (XPT2046)
+#
+CONFIG_LV_TOUCH_X_MIN=200
+CONFIG_LV_TOUCH_Y_MIN=120
+CONFIG_LV_TOUCH_X_MAX=1900
+CONFIG_LV_TOUCH_Y_MAX=1900
+CONFIG_LV_TOUCH_XY_SWAP=y
+CONFIG_LV_TOUCH_INVERT_X=y
+# CONFIG_LV_TOUCH_INVERT_Y is not set
+CONFIG_USE_BIT_BANG_TOUCH=y
+# CONFIG_LV_TOUCH_DETECT_IRQ is not set
+CONFIG_LV_TOUCH_DETECT_IRQ_PRESSURE=y
+# CONFIG_LV_TOUCH_DETECT_PRESSURE is not set
+# end of Touchpanel Configuration (XPT2046)
+
 CONFIG_LV_I2C_TOUCH_PORT=0
 # end of LVGL Touch controller
 # end of LVGL ESP Drivers
@@ -2705,4 +2733,4 @@ CONFIG_SPI_FLASH_WRITING_DANGEROUS_REGIONS_ABORTS=y
 CONFIG_SUPPRESS_SELECT_DEBUG_OUTPUT=y
 CONFIG_SUPPORT_TERMIOS=y
 CONFIG_SEMIHOSTFS_MAX_MOUNT_POINTS=1
-# End of deprecated options
+# End of deprecated options

sdkconfig.old

@@ -450,7 +450,7 @@ CONFIG_BT_NIMBLE_MEM_ALLOC_MODE_INTERNAL=y
 CONFIG_BT_NIMBLE_LOG_LEVEL_INFO=y
 # CONFIG_BT_NIMBLE_LOG_LEVEL_DEBUG is not set
 CONFIG_BT_NIMBLE_LOG_LEVEL=1
-CONFIG_BT_NIMBLE_MAX_CONNECTIONS=1
+CONFIG_BT_NIMBLE_MAX_CONNECTIONS=3
 CONFIG_BT_NIMBLE_MAX_BONDS=3
 CONFIG_BT_NIMBLE_MAX_CCCDS=8
 CONFIG_BT_NIMBLE_L2CAP_COC_MAX_NUM=0
@@ -478,8 +478,8 @@ CONFIG_BT_NIMBLE_SVC_GAP_APPEARANCE=0
 #
 # Memory Settings
 #
-CONFIG_BT_NIMBLE_MSYS_1_BLOCK_COUNT=24
-CONFIG_BT_NIMBLE_MSYS_1_BLOCK_SIZE=128
+CONFIG_BT_NIMBLE_MSYS_1_BLOCK_COUNT=12
+CONFIG_BT_NIMBLE_MSYS_1_BLOCK_SIZE=256
 CONFIG_BT_NIMBLE_MSYS_2_BLOCK_COUNT=24
 CONFIG_BT_NIMBLE_MSYS_2_BLOCK_SIZE=320
 CONFIG_BT_NIMBLE_TRANSPORT_ACL_FROM_LL_COUNT=24
@@ -491,14 +491,16 @@ CONFIG_BT_NIMBLE_L2CAP_COC_SDU_BUFF_COUNT=1
 # end of Memory Settings
 
 CONFIG_BT_NIMBLE_GATT_MAX_PROCS=4
-# CONFIG_BT_NIMBLE_HS_FLOW_CTRL is not set
+CONFIG_BT_NIMBLE_HS_FLOW_CTRL=y
+CONFIG_BT_NIMBLE_HS_FLOW_CTRL_ITVL=1000
+CONFIG_BT_NIMBLE_HS_FLOW_CTRL_THRESH=2
+CONFIG_BT_NIMBLE_HS_FLOW_CTRL_TX_ON_DISCONNECT=y
 CONFIG_BT_NIMBLE_RPA_TIMEOUT=900
 # CONFIG_BT_NIMBLE_MESH is not set
 CONFIG_BT_NIMBLE_CRYPTO_STACK_MBEDTLS=y
 CONFIG_BT_NIMBLE_HS_STOP_TIMEOUT_MS=2000
 # CONFIG_BT_NIMBLE_HOST_BASED_PRIVACY is not set
-CONFIG_BT_NIMBLE_ENABLE_CONN_REATTEMPT=y
-CONFIG_BT_NIMBLE_MAX_CONN_REATTEMPT=3
+# CONFIG_BT_NIMBLE_ENABLE_CONN_REATTEMPT is not set
 CONFIG_BT_NIMBLE_WHITELIST_SIZE=12
 # CONFIG_BT_NIMBLE_TEST_THROUGHPUT_TEST is not set
 # CONFIG_BT_NIMBLE_BLUFI_ENABLE is not set
@@ -2006,7 +2008,7 @@ CONFIG_LV_MEM_BUF_MAX_NUM=16
 #
 # HAL Settings
 #
-CONFIG_LV_DISP_DEF_REFR_PERIOD=30
+CONFIG_LV_DISP_DEF_REFR_PERIOD=5
 CONFIG_LV_INDEV_DEF_READ_PERIOD=30
 # CONFIG_LV_TICK_CUSTOM is not set
 CONFIG_LV_DPI_DEF=130
@@ -2241,7 +2243,7 @@ CONFIG_LV_USE_GRID=y
 # CONFIG_LV_USE_PNG is not set
 # CONFIG_LV_USE_BMP is not set
 # CONFIG_LV_USE_SJPG is not set
-# CONFIG_LV_USE_GIF is not set
+CONFIG_LV_USE_GIF=y
 # CONFIG_LV_USE_QRCODE is not set
 # CONFIG_LV_USE_FREETYPE is not set
 # CONFIG_LV_USE_TINY_TTF is not set
@@ -2302,8 +2304,8 @@ CONFIG_LV_PREDEFINED_DISPLAY_NONE=y
 # CONFIG_LV_PREDEFINED_DISPLAY_WT32_SC01 is not set
 CONFIG_LV_TFT_DISPLAY_CONTROLLER_ILI9341=y
 CONFIG_LV_TFT_DISPLAY_PROTOCOL_SPI=y
-CONFIG_LV_HOR_RES_MAX=240
-CONFIG_LV_VER_RES_MAX=320
+CONFIG_LV_HOR_RES_MAX=320
+CONFIG_LV_VER_RES_MAX=240
 CONFIG_LV_DISPLAY_ORIENTATION_PORTRAIT=y
 # CONFIG_LV_DISPLAY_ORIENTATION_PORTRAIT_INVERTED is not set
 # CONFIG_LV_DISPLAY_ORIENTATION_LANDSCAPE is not set
@@ -2333,8 +2335,8 @@ CONFIG_LV_TFT_DISPLAY_USER_CONTROLLER_ILI9341=y
 # CONFIG_LV_TFT_DISPLAY_USER_CONTROLLER_ILI9163C is not set
 # CONFIG_LV_TFT_DISPLAY_USER_CONTROLLER_PCD8544 is not set
 # CONFIG_CUSTOM_DISPLAY_BUFFER_SIZE is not set
-# CONFIG_LV_TFT_DISPLAY_SPI2_HOST is not set
-CONFIG_LV_TFT_DISPLAY_SPI3_HOST=y
+CONFIG_LV_TFT_DISPLAY_SPI2_HOST=y
+# CONFIG_LV_TFT_DISPLAY_SPI3_HOST is not set
 CONFIG_LV_TFT_DISPLAY_SPI_TRANS_MODE_SIO=y
 # CONFIG_LV_TFT_DISPLAY_SPI_TRANS_MODE_DIO is not set
 # CONFIG_LV_TFT_DISPLAY_SPI_TRANS_MODE_QIO is not set
@@ -2360,30 +2362,29 @@ CONFIG_LV_TFT_SPI_CLK_DIVIDER_2=y
 # CONFIG_LV_TFT_SPI_CLK_DIVIDER_48 is not set
 # CONFIG_LV_TFT_SPI_CLK_DIVIDER_80 is not set
 CONFIG_LV_TFT_CUSTOM_SPI_CLK_DIVIDER=2
-# CONFIG_LV_INVERT_COLORS is not set
+CONFIG_LV_INVERT_COLORS=y
 
 #
 # Display Pin Assignments
 #
-CONFIG_LV_DISP_SPI_MOSI=23
+CONFIG_LV_DISP_SPI_MOSI=13
 CONFIG_LV_DISPLAY_USE_SPI_MISO=y
-CONFIG_LV_DISP_SPI_MISO=19
+CONFIG_LV_DISP_SPI_MISO=12
 CONFIG_LV_DISP_SPI_INPUT_DELAY_NS=0
-CONFIG_LV_DISP_SPI_CLK=18
+CONFIG_LV_DISP_SPI_CLK=14
 CONFIG_LV_DISPLAY_USE_SPI_CS=y
-CONFIG_LV_DISP_SPI_CS=17
+CONFIG_LV_DISP_SPI_CS=15
 CONFIG_LV_DISPLAY_USE_DC=y
-CONFIG_LV_DISP_PIN_DC=16
-CONFIG_LV_DISP_USE_RST=y
-CONFIG_LV_DISP_PIN_RST=5
+CONFIG_LV_DISP_PIN_DC=2
+# CONFIG_LV_DISP_USE_RST is not set
 CONFIG_LV_DISP_PIN_BUSY=35
 # end of Display Pin Assignments
 
 # CONFIG_LV_DISP_BACKLIGHT_OFF is not set
 CONFIG_LV_DISP_BACKLIGHT_SWITCH=y
 # CONFIG_LV_DISP_BACKLIGHT_PWM is not set
 CONFIG_LV_BACKLIGHT_ACTIVE_LVL=y
-CONFIG_LV_DISP_PIN_BCKL=32
+CONFIG_LV_DISP_PIN_BCKL=21
 CONFIG_LV_I2C_DISPLAY_PORT=0
 # end of LVGL TFT Display controller
 
@@ -2400,17 +2401,17 @@ CONFIG_LV_TOUCH_CONTROLLER_XPT2046=y
 # CONFIG_LV_TOUCH_CONTROLLER_RA8875 is not set
 # CONFIG_LV_TOUCH_CONTROLLER_GT911 is not set
 CONFIG_LV_TOUCH_DRIVER_PROTOCOL_SPI=y
-CONFIG_LV_TOUCH_CONTROLLER_SPI2_HOST=y
-# CONFIG_LV_TOUCH_CONTROLLER_SPI3_HOST is not set
+# CONFIG_LV_TOUCH_CONTROLLER_SPI2_HOST is not set
+CONFIG_LV_TOUCH_CONTROLLER_SPI3_HOST=y
 
 #
 # Touchpanel (XPT2046) Pin Assignments
 #
-CONFIG_LV_TOUCH_SPI_MISO=19
-CONFIG_LV_TOUCH_SPI_MOSI=23
-CONFIG_LV_TOUCH_SPI_CLK=18
-CONFIG_LV_TOUCH_SPI_CS=5
-CONFIG_LV_TOUCH_PIN_IRQ=25
+CONFIG_LV_TOUCH_SPI_MISO=39
+CONFIG_LV_TOUCH_SPI_MOSI=32
+CONFIG_LV_TOUCH_SPI_CLK=25
+CONFIG_LV_TOUCH_SPI_CS=33
+CONFIG_LV_TOUCH_PIN_IRQ=36
 # end of Touchpanel (XPT2046) Pin Assignments
 
 #
@@ -2423,9 +2424,10 @@ CONFIG_LV_TOUCH_Y_MAX=1900
 CONFIG_LV_TOUCH_XY_SWAP=y
 CONFIG_LV_TOUCH_INVERT_X=y
 # CONFIG_LV_TOUCH_INVERT_Y is not set
+# CONFIG_USE_BIT_BANG_TOUCH is not set
 # CONFIG_LV_TOUCH_DETECT_IRQ is not set
-# CONFIG_LV_TOUCH_DETECT_IRQ_PRESSURE is not set
-CONFIG_LV_TOUCH_DETECT_PRESSURE=y
+CONFIG_LV_TOUCH_DETECT_IRQ_PRESSURE=y
+# CONFIG_LV_TOUCH_DETECT_PRESSURE is not set
 # end of Touchpanel Configuration (XPT2046)
 
 CONFIG_LV_I2C_TOUCH_PORT=0