Docs | Github | PyPI

sts1-sensors

Streamline the process of handling sensors for the STS1 project.

The following sensors are available both on the satellite and on the EDU module:

• ADXL345 - Digital accelerometer.
• BME688 - Pressure, humidity, temperature and gas sensor.
• BMM150 - Geomagnetic sensor.
• L3GD20H - Three-axis gyroscope.
• TMP112 - High-accuracy temperature sensor.

The following sensors are available on the satellite only:

• GUVA_C32 - Ultraviolet light sensor.

Quickstart

from sts1_sensors import ADXL345, BME688, BMM150, L3GD20H, TMP112

# Accelerometer
accel = ADXL345()
x, y, z = accel.get_g()
print(f"{x=:.2f} g, {y=:.2f} g, {z=:.2f} g")

# Temperature, pressure, humidity and gas sensor
multi = BME688(enable_gas_measurements=True)
t = multi.get_temperature()
p = multi.get_pressure()
h = multi.get_humidity()
heat = multi.get_heat_stable()
res = multi.get_gas_resistance()
print(f"{t:.2f} °C, {p:.2f} hPa, {h:.2f} %RH, {heat=}, {res:.2f} Ohms")

# Geomagnetic sensor
mag = BMM150()
x, y, z = mag.get_magnetic_data()
print(f"{x=:.2f} µT, {y=:.2f} µT, {z=:.2f} µT")
print(f"Heading: {mag.get_heading():.2f}°")

# Gyroscope
gyro = L3GD20H()
x, y, z = gyro.get_dps()
print(f"{x=:.2f} dps, {y=:.2f} dps, {z=:.2f} dps")

# Temperature sensor
temp = TMP112()
print(f"{temp.get_temp():.2f} °C")

More examples, see examples folder.

Installation

Initial Setup on the Raspberry Pi

• Open a terminal on the Raspberry Pi (e.g. via SSH).
• Activate the I2C interface: sudo raspi-config
• Reboot sudo reboot now then reconnect.
• Run sudo apt-get install i2c-tools
• Run ls /dev/i2c*. Note the last number that apprears. E.g. for /dev/i2c-1 this would be 1.
• Run i2cdetect -y 1. You may change that last number according to what you saw in the previous step.
• If you see a grid of dashes -- with some numbers, this means some sensors were recognized and you are good to go. For example:

flo@raspberrypi:~ $ sudo i2cdetect -y 1
     0  1  2  3  4  5  6  7  8  9  a  b  c  d  e  f
00:                         -- -- -- -- -- -- -- --
10: 10 -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
20: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
30: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
40: -- -- -- -- -- -- -- -- 48 -- -- -- -- -- -- --
50: -- -- -- 53 -- -- -- -- -- -- -- -- -- -- -- --
60: -- -- -- -- -- -- -- -- -- -- 6a -- -- -- -- --
70: -- -- -- -- -- -- 76 --

Installing the Python Package on the Raspberry Pi

If you want the latest stable version, install it like so:

pip install sts1-sensors

For Developers

• Install just: curl --proto '=https' --tlsv1.2 -sSf https://just.systems/install.sh | bash -s -- --to ~/bin
• Add it to ~/.bashrc: export PATH="$PATH:$HOME/bin"
• Install the package manager uv: curl -LsSf https://astral.sh/uv/install.sh | sh
• Add its path to your ~/.bashrc such that the command uv is available: export PATH=$HOME/.local/bin:$PATH
• Clone this repo: git clone https://github.com/SpaceTeam/STS1_sensor_libraries
• Switch into the directory.
• Run uv sync --all-extras --dev. This creates a .venv folder and installs all necessary dependencies.
• (Only on Raspberry Pi) Run pytest