update locale for new strings

SoftFever · Oct 24, 2023 · dcb23ab · dcb23ab
1 parent f1c884a
commit dcb23ab
Show file tree

Hide file tree

Showing 17 changed files with 187 additions and 17 deletions.
diff --git a/localization/i18n/OrcaSlicer.pot b/localization/i18n/OrcaSlicer.pot
@@ -8,7 +8,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2023-10-24 00:18+0800\n"
+"POT-Creation-Date: 2023-10-24 19:49+0800\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
 "Language-Team: LANGUAGE <[email protected]>\n"
@@ -9078,6 +9078,16 @@ msgstr ""
 msgid "Close holes"
 msgstr ""
 
+msgid "Z offset"
+msgstr ""
+
+msgid ""
+"This value will be added (or subtracted) from all the Z coordinates in the "
+"output G-code. It is used to compensate for bad Z endstop position: for "
+"example, if your endstop zero actually leaves the nozzle 0.3mm far from the "
+"print bed, set this to -0.3 (or fix your endstop)."
+msgstr ""
+
 msgid "Enable support"
 msgstr ""
 

diff --git a/localization/i18n/cs/OrcaSlicer_cs.po b/localization/i18n/cs/OrcaSlicer_cs.po
@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2023-10-24 00:18+0800\n"
+"POT-Creation-Date: 2023-10-24 19:49+0800\n"
 "PO-Revision-Date: 2023-09-30 15:15+0200\n"
 "Last-Translator: René Mošner <[email protected]>\n"
 "Language-Team: \n"
@@ -10012,6 +10012,16 @@ msgstr "Paritní vyplňování"
 msgid "Close holes"
 msgstr "Uzavírání děr"
 
+msgid "Z offset"
+msgstr ""
+
+msgid ""
+"This value will be added (or subtracted) from all the Z coordinates in the "
+"output G-code. It is used to compensate for bad Z endstop position: for "
+"example, if your endstop zero actually leaves the nozzle 0.3mm far from the "
+"print bed, set this to -0.3 (or fix your endstop)."
+msgstr ""
+
 msgid "Enable support"
 msgstr "Povolit podpěry"
 

diff --git a/localization/i18n/de/OrcaSlicer_de.po b/localization/i18n/de/OrcaSlicer_de.po
@@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2023-10-24 00:18+0800\n"
+"POT-Creation-Date: 2023-10-24 19:49+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: Heiko Liebscher <hliebschergmail.com>\n"
 "Language-Team: \n"
@@ -10355,6 +10355,16 @@ msgstr "Gerade-ungerade"
 msgid "Close holes"
 msgstr "Löcher schließen"
 
+msgid "Z offset"
+msgstr ""
+
+msgid ""
+"This value will be added (or subtracted) from all the Z coordinates in the "
+"output G-code. It is used to compensate for bad Z endstop position: for "
+"example, if your endstop zero actually leaves the nozzle 0.3mm far from the "
+"print bed, set this to -0.3 (or fix your endstop)."
+msgstr ""
+
 msgid "Enable support"
 msgstr "Stützstrukturen aktivieren"
 

diff --git a/localization/i18n/en/OrcaSlicer_en.po b/localization/i18n/en/OrcaSlicer_en.po
@@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2023-10-24 00:18+0800\n"
+"POT-Creation-Date: 2023-10-24 19:49+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -9688,6 +9688,16 @@ msgstr "Even-odd"
 msgid "Close holes"
 msgstr "Close holes"
 
+msgid "Z offset"
+msgstr ""
+
+msgid ""
+"This value will be added (or subtracted) from all the Z coordinates in the "
+"output G-code. It is used to compensate for bad Z endstop position: for "
+"example, if your endstop zero actually leaves the nozzle 0.3mm far from the "
+"print bed, set this to -0.3 (or fix your endstop)."
+msgstr ""
+
 msgid "Enable support"
 msgstr "Enable support"
 

diff --git a/localization/i18n/es/OrcaSlicer_es.po b/localization/i18n/es/OrcaSlicer_es.po
@@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2023-10-24 00:18+0800\n"
+"POT-Creation-Date: 2023-10-24 19:49+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: Carlos Fco. Caruncho Serrano <[email protected]>\n"
 "Language-Team: \n"
@@ -10144,6 +10144,16 @@ msgstr "Par-impar"
 msgid "Close holes"
 msgstr "Cerrar agujeros"
 
+msgid "Z offset"
+msgstr ""
+
+msgid ""
+"This value will be added (or subtracted) from all the Z coordinates in the "
+"output G-code. It is used to compensate for bad Z endstop position: for "
+"example, if your endstop zero actually leaves the nozzle 0.3mm far from the "
+"print bed, set this to -0.3 (or fix your endstop)."
+msgstr ""
+
 msgid "Enable support"
 msgstr "Habilitar el soporte"
 

diff --git a/localization/i18n/fr/OrcaSlicer_fr.po b/localization/i18n/fr/OrcaSlicer_fr.po
@@ -6,7 +6,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2023-10-24 00:18+0800\n"
+"POT-Creation-Date: 2023-10-24 19:49+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: \n"
 "Language-Team: Guislain Cyril\n"
@@ -10096,6 +10096,16 @@ msgstr "Even-odd"
 msgid "Close holes"
 msgstr "Combler les trous"
 
+msgid "Z offset"
+msgstr ""
+
+msgid ""
+"This value will be added (or subtracted) from all the Z coordinates in the "
+"output G-code. It is used to compensate for bad Z endstop position: for "
+"example, if your endstop zero actually leaves the nozzle 0.3mm far from the "
+"print bed, set this to -0.3 (or fix your endstop)."
+msgstr ""
+
 msgid "Enable support"
 msgstr "Activer les supports"
 

diff --git a/localization/i18n/hu/OrcaSlicer_hu.po b/localization/i18n/hu/OrcaSlicer_hu.po
@@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2023-10-24 00:18+0800\n"
+"POT-Creation-Date: 2023-10-24 19:49+0800\n"
 "Language: hu\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
@@ -9772,6 +9772,16 @@ msgstr "Páros-páratlan"
 msgid "Close holes"
 msgstr "Hézagok lezárása"
 
+msgid "Z offset"
+msgstr ""
+
+msgid ""
+"This value will be added (or subtracted) from all the Z coordinates in the "
+"output G-code. It is used to compensate for bad Z endstop position: for "
+"example, if your endstop zero actually leaves the nozzle 0.3mm far from the "
+"print bed, set this to -0.3 (or fix your endstop)."
+msgstr ""
+
 msgid "Enable support"
 msgstr "Támasz engedélyezése"
 

diff --git a/localization/i18n/it/OrcaSlicer_it.po b/localization/i18n/it/OrcaSlicer_it.po
@@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2023-10-24 00:18+0800\n"
+"POT-Creation-Date: 2023-10-24 19:49+0800\n"
 "Language: it\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
@@ -9742,6 +9742,16 @@ msgstr "Pari-dispari"
 msgid "Close holes"
 msgstr "Chiudi fori"
 
+msgid "Z offset"
+msgstr ""
+
+msgid ""
+"This value will be added (or subtracted) from all the Z coordinates in the "
+"output G-code. It is used to compensate for bad Z endstop position: for "
+"example, if your endstop zero actually leaves the nozzle 0.3mm far from the "
+"print bed, set this to -0.3 (or fix your endstop)."
+msgstr ""
+
 msgid "Enable support"
 msgstr "Enable support"
 

diff --git a/localization/i18n/ja/OrcaSlicer_ja.po b/localization/i18n/ja/OrcaSlicer_ja.po
@@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2023-10-24 00:18+0800\n"
+"POT-Creation-Date: 2023-10-24 19:49+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -9446,6 +9446,16 @@ msgstr "Even-odd"
 msgid "Close holes"
 msgstr "穴を閉じる"
 
+msgid "Z offset"
+msgstr ""
+
+msgid ""
+"This value will be added (or subtracted) from all the Z coordinates in the "
+"output G-code. It is used to compensate for bad Z endstop position: for "
+"example, if your endstop zero actually leaves the nozzle 0.3mm far from the "
+"print bed, set this to -0.3 (or fix your endstop)."
+msgstr ""
+
 msgid "Enable support"
 msgstr "有効化"
 

diff --git a/localization/i18n/ko/OrcaSlicer_ko.po b/localization/i18n/ko/OrcaSlicer_ko.po
@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2023-10-24 00:18+0800\n"
+"POT-Creation-Date: 2023-10-24 19:49+0800\n"
 "PO-Revision-Date: 2023-10-23 15:17+0900\n"
 "Last-Translator: Hotsolidinfill, crwusiz <[email protected]>\n"
 "Language-Team: \n"
@@ -9845,6 +9845,16 @@ msgstr "짝수-홀수"
 msgid "Close holes"
 msgstr "구멍 닫기"
 
+msgid "Z offset"
+msgstr ""
+
+msgid ""
+"This value will be added (or subtracted) from all the Z coordinates in the "
+"output G-code. It is used to compensate for bad Z endstop position: for "
+"example, if your endstop zero actually leaves the nozzle 0.3mm far from the "
+"print bed, set this to -0.3 (or fix your endstop)."
+msgstr ""
+
 msgid "Enable support"
 msgstr "지지대 사용"
 

diff --git a/localization/i18n/nl/OrcaSlicer_nl.po b/localization/i18n/nl/OrcaSlicer_nl.po
@@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2023-10-24 00:18+0800\n"
+"POT-Creation-Date: 2023-10-24 19:49+0800\n"
 "Language: nl\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
@@ -9881,6 +9881,16 @@ msgstr "Even-oneven"
 msgid "Close holes"
 msgstr "Gaten sluiten"
 
+msgid "Z offset"
+msgstr ""
+
+msgid ""
+"This value will be added (or subtracted) from all the Z coordinates in the "
+"output G-code. It is used to compensate for bad Z endstop position: for "
+"example, if your endstop zero actually leaves the nozzle 0.3mm far from the "
+"print bed, set this to -0.3 (or fix your endstop)."
+msgstr ""
+
 msgid "Enable support"
 msgstr "Support inschakelen"
 

diff --git a/localization/i18n/ru/OrcaSlicer_ru.po b/localization/i18n/ru/OrcaSlicer_ru.po
@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: OrcaSlicer V1.7beta\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2023-10-24 00:18+0800\n"
+"POT-Creation-Date: 2023-10-24 19:49+0800\n"
 "PO-Revision-Date: 2023-09-21 14:29+0700\n"
 "Last-Translator: Andylg <[email protected]>\n"
 "Language-Team: \n"
@@ -10142,6 +10142,16 @@ msgstr "Чётный-нечётный"
 msgid "Close holes"
 msgstr "Закрытие отверстий"
 
+msgid "Z offset"
+msgstr ""
+
+msgid ""
+"This value will be added (or subtracted) from all the Z coordinates in the "
+"output G-code. It is used to compensate for bad Z endstop position: for "
+"example, if your endstop zero actually leaves the nozzle 0.3mm far from the "
+"print bed, set this to -0.3 (or fix your endstop)."
+msgstr ""
+
 msgid "Enable support"
 msgstr "Включить поддержку"
 

diff --git a/localization/i18n/sv/OrcaSlicer_sv.po b/localization/i18n/sv/OrcaSlicer_sv.po
@@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2023-10-24 00:18+0800\n"
+"POT-Creation-Date: 2023-10-24 19:49+0800\n"
 "Language: sv\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
@@ -9699,6 +9699,16 @@ msgstr "Jämnt-udda"
 msgid "Close holes"
 msgstr "Stäng hål"
 
+msgid "Z offset"
+msgstr ""
+
+msgid ""
+"This value will be added (or subtracted) from all the Z coordinates in the "
+"output G-code. It is used to compensate for bad Z endstop position: for "
+"example, if your endstop zero actually leaves the nozzle 0.3mm far from the "
+"print bed, set this to -0.3 (or fix your endstop)."
+msgstr ""
+
 msgid "Enable support"
 msgstr "Aktivera support"
 

diff --git a/localization/i18n/tr/OrcaSlicer_tr.po b/localization/i18n/tr/OrcaSlicer_tr.po
@@ -6,7 +6,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: OrcaSlicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2023-10-24 00:18+0800\n"
+"POT-Creation-Date: 2023-10-24 19:49+0800\n"
 "PO-Revision-Date: 2023-10-07 12:57+0300\n"
 "Last-Translator: Sadri Ercan\n"
 "Language-Team: Türkçe\n"
@@ -10061,6 +10061,16 @@ msgstr "Tek çift"
 msgid "Close holes"
 msgstr "Delikleri kapat"
 
+msgid "Z offset"
+msgstr ""
+
+msgid ""
+"This value will be added (or subtracted) from all the Z coordinates in the "
+"output G-code. It is used to compensate for bad Z endstop position: for "
+"example, if your endstop zero actually leaves the nozzle 0.3mm far from the "
+"print bed, set this to -0.3 (or fix your endstop)."
+msgstr ""
+
 msgid "Enable support"
 msgstr "Desteği etkinleştir"
 

diff --git a/localization/i18n/uk/OrcaSlicer_uk.po b/localization/i18n/uk/OrcaSlicer_uk.po
@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2023-10-24 00:18+0800\n"
+"POT-Creation-Date: 2023-10-24 19:49+0800\n"
 "PO-Revision-Date: 2023-08-10 20:25-0400\n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -9880,6 +9880,16 @@ msgstr "Парний-непарний"
 msgid "Close holes"
 msgstr "Закрити отвори"
 
+msgid "Z offset"
+msgstr ""
+
+msgid ""
+"This value will be added (or subtracted) from all the Z coordinates in the "
+"output G-code. It is used to compensate for bad Z endstop position: for "
+"example, if your endstop zero actually leaves the nozzle 0.3mm far from the "
+"print bed, set this to -0.3 (or fix your endstop)."
+msgstr ""
+
 msgid "Enable support"
 msgstr "Увімкнути підтримку"