fix some params from processes and filaments (#7801)

* Update FlyingBear S1 0.4 nozzle.json * Update 0.16mm Optimal @FlyingBear Reborn3.json * Update 0.16mm Optimal @FlyingBear S1.json * Update fdm_process_common.json * Update fdm_klipper_common.json * Update fdm_machine_common.json * Update fdm_klipper_common.json * Update fdm_machine_common.json * Update fdm_process_common.json * Update fdm_process_common_S1.json fix some parameters * Update fdm_process_common.json * Update FlyingBear S1 0.4 nozzle.json * Update 0.08mm Extra Fine @FlyingBear S1.json * Update 0.12mm Fine @FlyingBear S1.json * Update 0.16mm Optimal @FlyingBear S1.json * Update 0.20mm Standard @FlyingBear S1.json * Update 0.24mm Draft @FlyingBear S1.json * Update 0.08mm Extra Fine @FlyingBear Reborn3.json * Update 0.12mm Fine @FlyingBear Reborn3.json * Update 0.16mm Optimal @FlyingBear Reborn3.json * Update 0.20mm Standard @FlyingBear Reborn3.json * Update 0.24mm Draft @FlyingBear Reborn3.json * Update FlyingBear S1 0.4 nozzle.json * Update fdm_process_common_S1.json * Update fdm_process_common.json * Update 0.08mm Extra Fine @FlyingBear S1.json * Update 0.12mm Fine @FlyingBear S1.json * Update 0.16mm Optimal @FlyingBear S1.json * Update 0.08mm Extra Fine @FlyingBear Reborn3.json * Update 0.12mm Fine @FlyingBear Reborn3.json * Update 0.16mm Optimal @FlyingBear Reborn3.json * Update FlyingBear S1 0.4 nozzle.json fix zhop type * Update fdm_machine_common.json fix zhop type * Update fdm_process_common_S1.json * Update fdm_process_common.json * Update FlyingBear Generic PLA.json * Update FlyingBear PLA @S1.json * Update Other PLA @S1.json * Update fdm_filament_pla @S1.json * Update fdm_filament_pla_Hyper @S1.json * Update fdm_filament_pla_other @S1.json * Update fdm_filament_pla_Hyper_other @S1.json * Update fdm_filament_pla.json * Update fdm_filament_pla_Hyper.json * Update fdm_process_common_S1.json * Update fdm_process_common.json * Update fdm_machine_common.json * Update fdm_klipper_common.json * Update 0.08mm Extra Fine @FlyingBear S1.json * Update 0.08mm Extra Fine @FlyingBear Reborn3.json * Update 0.08mm Extra Fine @FlyingBear S1.json * Update 0.08mm Extra Fine @FlyingBear Reborn3.json * Update 0.12mm Fine @FlyingBear Reborn3.json * Update 0.12mm Fine @FlyingBear S1.json * Update 0.16mm Optimal @FlyingBear S1.json * Update 0.16mm Optimal @FlyingBear Reborn3.json * Update fdm_filament_pla.json * Update fdm_filament_pla_Hyper.json * Update fdm_filament_abs.json * Update fdm_filament_pc.json * Update fdm_filament_pet.json * Update fdm_filament_pa.json * Update fdm_filament_tpu.json * Update fdm_filament_abs @S1.json * Update fdm_filament_abs_other @S1.json * Update fdm_filament_pa @S1.json * Update fdm_filament_pa_other @S1.json * Update fdm_filament_pc @S1.json * Update fdm_filament_pc_other @S1.json * Update fdm_filament_pet @S1.json * Update fdm_filament_pet_other @S1.json * Update fdm_filament_pla @S1.json * Update fdm_filament_pla_other @S1.json * Update fdm_filament_pla_Hyper @S1.json * Update fdm_filament_pla_Hyper_other @S1.json * Update fdm_filament_tpu @S1.json * Update fdm_filament_tpu_other @S1.json * Update fdm_filament_tpu.json * Update FlyingBear PETG @S1.json * Update Other PETG @S1.json * Update Other PETG @S1.json * Update FlyingBear PETG @S1.json * Update FlyingBear Generic PETG.json * Update fdm_filament_pet.json * Update fdm_filament_pet @S1.json * Update fdm_filament_pet_other @S1.json * Update FlyingBear Generic PLA.json * Update FlyingBear PLA @S1.json * Update Other PLA @S1.json
SoftFever · Dec 20, 2024 · c52b845 · c52b845
1 parent 27ec198
commit c52b845
Show file tree

Hide file tree

Showing 33 changed files with 88 additions and 78 deletions.
diff --git a/resources/profiles/FlyingBear/filament/FlyingBear Generic PETG.json b/resources/profiles/FlyingBear/filament/FlyingBear Generic PETG.json
@@ -16,7 +16,7 @@
         "30"
     ],
     "overhang_fan_speed": [
-        "90"
+        "100"
     ],
     "overhang_fan_threshold": [
         "10%"
@@ -31,7 +31,7 @@
         "20"
     ],
     "slow_down_layer_time": [
-        "8"
+        "12"
     ],
     "filament_flow_ratio": [
         "0.94"

diff --git a/resources/profiles/FlyingBear/filament/FlyingBear Generic PLA.json b/resources/profiles/FlyingBear/filament/FlyingBear Generic PLA.json
@@ -16,7 +16,7 @@
         "8"
     ],
     "enable_pressure_advance": [
-        "1"
+        "0"
     ],
     "pressure_advance": [
         "0.032"

diff --git a/resources/profiles/FlyingBear/filament/S1/FlyingBear PETG @S1.json b/resources/profiles/FlyingBear/filament/S1/FlyingBear PETG @S1.json
@@ -16,7 +16,7 @@
         "30"
     ],
     "overhang_fan_speed": [
-        "90"
+        "100"
     ],
     "overhang_fan_threshold": [
         "10%"
@@ -31,7 +31,7 @@
         "20"
     ],
     "slow_down_layer_time": [
-        "8"
+        "12"
     ],
     "filament_flow_ratio": [
         "0.94"

diff --git a/resources/profiles/FlyingBear/filament/S1/FlyingBear PLA @S1.json b/resources/profiles/FlyingBear/filament/S1/FlyingBear PLA @S1.json
@@ -16,7 +16,7 @@
         "8"
     ],
     "enable_pressure_advance": [
-        "1"
+        "0"
     ],
     "pressure_advance": [
         "0.032"

diff --git a/resources/profiles/FlyingBear/filament/S1/Other PETG @S1.json b/resources/profiles/FlyingBear/filament/S1/Other PETG @S1.json
@@ -16,7 +16,7 @@
         "30"
     ],
     "overhang_fan_speed": [
-        "90"
+        "100"
     ],
     "overhang_fan_threshold": [
         "10%"
@@ -31,7 +31,7 @@
         "20"
     ],
     "slow_down_layer_time": [
-        "8"
+        "12"
     ],
     "filament_flow_ratio": [
         "0.94"

diff --git a/resources/profiles/FlyingBear/filament/S1/Other PLA @S1.json b/resources/profiles/FlyingBear/filament/S1/Other PLA @S1.json
@@ -16,7 +16,7 @@
         "8"
     ],
     "enable_pressure_advance": [
-        "1"
+        "0"
     ],
     "pressure_advance": [
         "0.032"

diff --git a/resources/profiles/FlyingBear/filament/S1/fdm_filament_abs @S1.json b/resources/profiles/FlyingBear/filament/S1/fdm_filament_abs @S1.json
@@ -50,7 +50,7 @@
         "20"
     ],
     "nozzle_temperature_initial_layer": [
-        "230"
+        "250"
     ],
     "reduce_fan_stop_start_freq": [
         "1"
@@ -68,7 +68,7 @@
         "80"
     ],
     "nozzle_temperature": [
-        "230"
+        "250"
     ],
     "temperature_vitrification": [
         "110"

diff --git a/resources/profiles/FlyingBear/filament/S1/fdm_filament_abs_other @S1.json b/resources/profiles/FlyingBear/filament/S1/fdm_filament_abs_other @S1.json
@@ -50,7 +50,7 @@
         "20"
     ],
     "nozzle_temperature_initial_layer": [
-        "250"
+        "260"
     ],
     "reduce_fan_stop_start_freq": [
         "1"
@@ -68,7 +68,7 @@
         "80"
     ],
     "nozzle_temperature": [
-        "250"
+        "260"
     ],
     "temperature_vitrification": [
         "110"

diff --git a/resources/profiles/FlyingBear/filament/S1/fdm_filament_pa @S1.json b/resources/profiles/FlyingBear/filament/S1/fdm_filament_pa @S1.json
@@ -53,7 +53,7 @@
         "20"
     ],
     "nozzle_temperature_initial_layer": [
-        "240"
+        "260"
     ],
     "reduce_fan_stop_start_freq": [
         "0"
@@ -68,7 +68,7 @@
         "40"
     ],
     "nozzle_temperature": [
-        "240"
+        "260"
     ],
     "temperature_vitrification": [
         "108"

diff --git a/resources/profiles/FlyingBear/filament/S1/fdm_filament_pa_other @S1.json b/resources/profiles/FlyingBear/filament/S1/fdm_filament_pa_other @S1.json
@@ -53,7 +53,7 @@
         "20"
     ],
     "nozzle_temperature_initial_layer": [
-        "260"
+        "270"
     ],
     "reduce_fan_stop_start_freq": [
         "0"
@@ -68,7 +68,7 @@
         "40"
     ],
     "nozzle_temperature": [
-        "260"
+        "270"
     ],
     "temperature_vitrification": [
         "108"

diff --git a/resources/profiles/FlyingBear/filament/S1/fdm_filament_pc @S1.json b/resources/profiles/FlyingBear/filament/S1/fdm_filament_pc @S1.json
@@ -53,7 +53,7 @@
         "20"
     ],
     "nozzle_temperature_initial_layer": [
-        "240"
+        "260"
     ],
     "reduce_fan_stop_start_freq": [
         "0"
@@ -71,7 +71,7 @@
         "60"
     ],
     "nozzle_temperature": [
-        "240"
+        "260"
     ],
     "temperature_vitrification": [
         "140"

diff --git a/resources/profiles/FlyingBear/filament/S1/fdm_filament_pc_other @S1.json b/resources/profiles/FlyingBear/filament/S1/fdm_filament_pc_other @S1.json
@@ -53,7 +53,7 @@
         "20"
     ],
     "nozzle_temperature_initial_layer": [
-        "260"
+        "270"
     ],
     "reduce_fan_stop_start_freq": [
         "0"
@@ -71,7 +71,7 @@
         "60"
     ],
     "nozzle_temperature": [
-        "260"
+        "270"
     ],
     "temperature_vitrification": [
         "140"

diff --git a/resources/profiles/FlyingBear/filament/S1/fdm_filament_pet @S1.json b/resources/profiles/FlyingBear/filament/S1/fdm_filament_pet @S1.json
@@ -53,7 +53,7 @@
         "30"
     ],
     "nozzle_temperature_initial_layer": [
-        "220"
+        "245"
     ],
     "reduce_fan_stop_start_freq": [
         "1"
@@ -68,7 +68,7 @@
         "90"
     ],
     "nozzle_temperature": [
-        "220"
+        "245"
     ],
     "temperature_vitrification": [
         "80"
@@ -80,7 +80,7 @@
         "280"
     ],
     "additional_cooling_fan_speed": [
-        "100"
+        "0"
     ],
     "filament_start_gcode": [
         "; filament start gcode\n"

diff --git a/resources/profiles/FlyingBear/filament/S1/fdm_filament_pet_other @S1.json b/resources/profiles/FlyingBear/filament/S1/fdm_filament_pet_other @S1.json
@@ -53,7 +53,7 @@
         "30"
     ],
     "nozzle_temperature_initial_layer": [
-        "230"
+        "255"
     ],
     "reduce_fan_stop_start_freq": [
         "1"
@@ -68,7 +68,7 @@
         "90"
     ],
     "nozzle_temperature": [
-        "230"
+        "255"
     ],
     "temperature_vitrification": [
         "80"
@@ -80,7 +80,7 @@
         "280"
     ],
     "additional_cooling_fan_speed": [
-        "100"
+        "0"
     ],
     "filament_start_gcode": [
         "; filament start gcode\n"

diff --git a/resources/profiles/FlyingBear/filament/S1/fdm_filament_pla @S1.json b/resources/profiles/FlyingBear/filament/S1/fdm_filament_pla @S1.json
@@ -47,7 +47,7 @@
         "60"
     ],
     "nozzle_temperature_initial_layer": [
-        "200"
+        "220"
     ],
     "reduce_fan_stop_start_freq": [
         "1"
@@ -71,7 +71,7 @@
         "1"
     ],
     "nozzle_temperature": [
-        "195"
+        "220"
     ],
     "temperature_vitrification": [
         "60"

diff --git a/resources/profiles/FlyingBear/filament/S1/fdm_filament_pla_Hyper @S1.json b/resources/profiles/FlyingBear/filament/S1/fdm_filament_pla_Hyper @S1.json
@@ -47,7 +47,7 @@
         "60"
     ],
     "nozzle_temperature_initial_layer": [
-        "200"
+        "220"
     ],
     "reduce_fan_stop_start_freq": [
         "1"
@@ -71,7 +71,7 @@
         "1"
     ],
     "nozzle_temperature": [
-        "195"
+        "220"
     ],
     "temperature_vitrification": [
         "60"

diff --git a/resources/profiles/FlyingBear/filament/S1/fdm_filament_pla_Hyper_other @S1.json b/resources/profiles/FlyingBear/filament/S1/fdm_filament_pla_Hyper_other @S1.json
@@ -47,7 +47,7 @@
         "60"
     ],
     "nozzle_temperature_initial_layer": [
-        "205"
+        "220"
     ],
     "reduce_fan_stop_start_freq": [
         "1"
@@ -71,7 +71,7 @@
         "1"
     ],
     "nozzle_temperature": [
-        "205"
+        "220"
     ],
     "temperature_vitrification": [
         "60"

diff --git a/resources/profiles/FlyingBear/filament/S1/fdm_filament_pla_other @S1.json b/resources/profiles/FlyingBear/filament/S1/fdm_filament_pla_other @S1.json
@@ -47,7 +47,7 @@
         "60"
     ],
     "nozzle_temperature_initial_layer": [
-        "205"
+        "220"
     ],
     "reduce_fan_stop_start_freq": [
         "1"
@@ -71,7 +71,7 @@
         "1"
     ],
     "nozzle_temperature": [
-        "205"
+        "220"
     ],
     "temperature_vitrification": [
         "60"

diff --git a/resources/profiles/FlyingBear/filament/S1/fdm_filament_tpu @S1.json b/resources/profiles/FlyingBear/filament/S1/fdm_filament_tpu @S1.json
@@ -48,7 +48,7 @@
     ],
 
     "nozzle_temperature_initial_layer": [
-        "210"
+        "230"
     ],
     "reduce_fan_stop_start_freq": [
         "1"
@@ -72,7 +72,7 @@
         "1"
     ],
     "nozzle_temperature": [
-        "210"
+        "230"
     ],
     "temperature_vitrification": [
         "60"

diff --git a/resources/profiles/FlyingBear/filament/S1/fdm_filament_tpu_other @S1.json b/resources/profiles/FlyingBear/filament/S1/fdm_filament_tpu_other @S1.json
@@ -48,7 +48,7 @@
     ],
 
     "nozzle_temperature_initial_layer": [
-        "220"
+        "230"
     ],
     "reduce_fan_stop_start_freq": [
         "1"
@@ -72,7 +72,7 @@
         "1"
     ],
     "nozzle_temperature": [
-        "220"
+        "230"
     ],
     "temperature_vitrification": [
         "60"

diff --git a/resources/profiles/FlyingBear/filament/fdm_filament_abs.json b/resources/profiles/FlyingBear/filament/fdm_filament_abs.json
@@ -50,7 +50,7 @@
         "20"
     ],
     "nozzle_temperature_initial_layer": [
-        "230"
+        "250"
     ],
     "reduce_fan_stop_start_freq": [
         "1"
@@ -68,7 +68,7 @@
         "80"
     ],
     "nozzle_temperature": [
-        "230"
+        "250"
     ],
     "temperature_vitrification": [
         "110"

diff --git a/resources/profiles/FlyingBear/filament/fdm_filament_pa.json b/resources/profiles/FlyingBear/filament/fdm_filament_pa.json
@@ -53,7 +53,7 @@
         "20"
     ],
     "nozzle_temperature_initial_layer": [
-        "240"
+        "260"
     ],
     "reduce_fan_stop_start_freq": [
         "0"
@@ -68,7 +68,7 @@
         "40"
     ],
     "nozzle_temperature": [
-        "240"
+        "260"
     ],
     "temperature_vitrification": [
         "108"
-Original file line number
+Diff line change
@@ Expand Up / @@ -16,7 +16,7 @@ @@
             "30"
         ],
         "overhang_fan_speed": [
-            "90"
+            "100"
         ],
         "overhang_fan_threshold": [
             "10%"
@@ Expand All / @@ -31,7 +31,7 @@ @@
             "20"
         ],
         "slow_down_layer_time": [
-            "8"
+            "12"
         ],
         "filament_flow_ratio": [
             "0.94"
@@ Expand Down @@