Merged optimized print profiles from Comgrow Official (#2454)

* Merged optimized print profiles from Comgrow Official

* Corrected profile naming convention

resources/profiles/Comgrow/filament/Comgrow Generic ABS.json

@@ -7,11 +7,11 @@
 	"instantiation": "true",
 	"inherits": "fdm_filament_abs",
 	"filament_flow_ratio": ["0.926"],
-	"filament_max_volumetric_speed": ["12"],
+	"filament_max_volumetric_speed": ["30"],
+	"filament_retraction_length": ["0.5"],
 	"compatible_printers": [
 		"Comgrow T500 0.4 nozzle",
 		"Comgrow T500 0.6 nozzle",
 		"Comgrow T500 0.8 nozzle"
-
 	]
 }

resources/profiles/Comgrow/filament/Comgrow Generic PETG.json

@@ -16,12 +16,12 @@
 	"slow_down_min_speed": ["10"],
 	"slow_down_layer_time": ["8"],
 	"filament_flow_ratio": ["0.95"],
-	"filament_max_volumetric_speed": ["10"],
+	"filament_max_volumetric_speed": ["30"],
+	"filament_retraction_length": ["0.5"],
 	"filament_start_gcode": ["; filament start gcode\n"],
 	"compatible_printers": [
 		"Comgrow T500 0.4 nozzle",
 		"Comgrow T500 0.6 nozzle",
 		"Comgrow T500 0.8 nozzle"
-
 	]
 }

resources/profiles/Comgrow/filament/Comgrow Generic PLA.json

@@ -7,12 +7,12 @@
 	"instantiation": "true",
 	"inherits": "fdm_filament_pla",
 	"filament_flow_ratio": ["0.98"],
-	"filament_max_volumetric_speed": ["12"],
+	"filament_max_volumetric_speed": ["30"],
+	"filament_retraction_length": ["0.5"],
 	"slow_down_layer_time": ["8"],
 	"compatible_printers": [
 		"Comgrow T500 0.4 nozzle",
 		"Comgrow T500 0.6 nozzle",
 		"Comgrow T500 0.8 nozzle"
-
 	]
 }

resources/profiles/Comgrow/machine/Comgrow T500 0.6 nozzle.json

@@ -10,9 +10,6 @@
   "retraction_length": [
     "1.0"
   ],
-  "z_hop": [
-    "0.3"
-  ],
   "nozzle_diameter": [
     "0.6"
   ],

resources/profiles/Comgrow/machine/Comgrow T500 0.8 nozzle.json

@@ -10,9 +10,6 @@
   "retraction_length": [
     "1.0"
   ],
-  "z_hop": [
-    "0.3"
-  ],
   "nozzle_diameter": [
     "0.8"
   ],

resources/profiles/Comgrow/machine/fdm_comgrow_common.json

@@ -102,7 +102,7 @@
     "2"
   ],
   "z_hop": [
-    "0.2"
+    "0"
   ],
   "retract_restart_extra": [
     "0"
@@ -131,8 +131,8 @@
   "bed_exclude_area": [
     "0x0"
   ],
-  "machine_start_gcode": "M190 S[bed_temperature_initial_layer_single]\nM109 S[nozzle_temperature_initial_layer]\nPRINT_START EXTRUDER=[nozzle_temperature_initial_layer] BED=[bed_temperature_initial_layer_single]\n; You can use following code instead if your PRINT_START macro support Chamber and print area bedmesh\n; PRINT_START EXTRUDER=[nozzle_temperature_initial_layer] BED=[bed_temperature_initial_layer_single] Chamber=[chamber_temperature] PRINT_MIN={first_layer_print_min[0]},{first_layer_print_min[1]} PRINT_MAX={first_layer_print_max[0]},{first_layer_print_max[1]}",
-  "machine_end_gcode": "PRINT_END",
+  "machine_start_gcode": "G90 ; use absolute coordinates\nM83 ; extruder relative mode\nG28 ; home all\nM104 S[nozzle_temperature_initial_layer] ; set extruder temp\nM140 S[bed_temperature_initial_layer_single] ; set bed temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp\nM109 S[nozzle_temperature_initial_layer] ; wait for extruder temp\nG1 Z2 F240\nG1 X2 Y10 F3000\nG1 Z0.28 F240\nG92 E0\nG1 Y190 E15 F1500 ; intro line\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E15 F1200 ; intro line\nG92 E0",
+	"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
   "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
   "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
   "scan_first_layer": "0",

resources/profiles/Comgrow/process/0.16mm Opitmal @Comgrow T500 0.6.json

@@ -3,20 +3,106 @@
     "setting_id": "GP004",
     "name": "0.16mm Opitmal @Comgrow T500 0.6",
     "from": "system",
-    "instantiation": "true",
+	"instantiation": "true",
     "inherits": "fdm_process_comgrow_common",
-    "bottom_shell_layers": "5",
-    "initial_layer_line_width": "0.6",
-    "initial_layer_print_height": "0.3",
-    "inner_wall_line_width": "0.6",
-    "internal_solid_infill_line_width": "0.6",
-    "layer_height": "0.16",
-    "line_width": "0.6",
-    "outer_wall_line_width": "0.6",
-    "sparse_infill_line_width": "0.6",
-    "support_line_width": "0.6",
-    "top_shell_layers": "7",
-    "top_surface_line_width": "0.6",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.16",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "2",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "0.85",
+	"bridge_speed": "25",
+	"brim_width": "0",
+	"brim_object_gap": "0",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "3000",
+	"outer_wall_acceleration": "3000",
+	"top_surface_acceleration": "3000",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.1",
+	"enable_arc_fitting": "0",
+	"outer_wall_line_width": "0.6",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.6",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "grid",
+	"initial_layer_acceleration": "1000",
+	"travel_acceleration": "3000",
+	"inner_wall_acceleration": "3000",
+	"initial_layer_line_width": "0.6",
+	"initial_layer_print_height": "0.2",
+	"infill_combination": "0",
+	"sparse_infill_line_width": "0.6",
+	"infill_wall_overlap": "23%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.25",
+	"ironing_speed": "15",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "20",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.6",
+	"wall_loops": "2",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "3",
+	"skirt_height": "2",
+	"skirt_loops": "2",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.15",
+	"support_filament": "0",
+	"support_line_width": "0.6",
+	"support_interface_loop_pattern": "0",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "3",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "0.2",
+	"support_interface_speed": "100%",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "0.2",
+	"support_speed": "120",
+	"support_threshold_angle": "40",
+	"support_object_xy_distance": "60%",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "0",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonic",
+	"top_surface_line_width": "0.6",
+	"top_shell_layers": "2",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "45",
+	"initial_layer_infill_speed": "60",
+	"outer_wall_speed": "120",
+	"inner_wall_speed": "140",
+	"internal_solid_infill_speed": "120",
+	"top_surface_speed": "30",
+	"gap_infill_speed": "60",
+	"sparse_infill_speed": "150",
+	"travel_speed": "170",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",	
+	"seam_gap": "5%",
     "compatible_printers": [
         "Comgrow T500 0.6 nozzle"
     ]

resources/profiles/Comgrow/process/0.16mm Optimal @Comgrow T500 0.4.json

@@ -5,46 +5,104 @@
     "from": "system",
     "instantiation": "true",
     "inherits": "fdm_process_comgrow_common",
-    "adaptive_layer_height": "1",
-    "brim_object_gap": "0",
-    "brim_width": "0",
-    "default_acceleration": "0",
-    "detect_thin_wall": "1",
-    "elefant_foot_compensation": "0.1",
-    "filename_format": "[input_filename_base].gcode",
-    "infill_wall_overlap": "25%",
-    "initial_layer_acceleration": "0",
-    "initial_layer_infill_speed": "35%",
-    "initial_layer_line_width": "0.42",
-    "initial_layer_speed": "35%",
-    "inner_wall_acceleration": "0",
-    "internal_solid_infill_line_width": "0",
-    "internal_solid_infill_speed": "50",
-    "ironing_type": "no ironing",
-    "layer_height": "0.16",
-    "line_width": "0.45",
-    "minimum_sparse_infill_area": "10",
-    "outer_wall_line_width": "0.45",
-    "outer_wall_speed": "40",
-    "prime_tower_width": "60",
-    "skirt_height": "2",
-    "skirt_loops": "2",
-    "sparse_infill_speed": "60",
-    "support_base_pattern_spacing": "0.2",
-    "support_interface_bottom_layers": "-1",
-    "support_interface_spacing": "0.2",
-    "support_interface_speed": "100%",
-    "support_interface_top_layers": "3",
-    "support_line_width": "0.38",
-    "support_object_xy_distance": "60%",
-    "support_speed": "40",
-    "support_style": "grid",
-    "support_threshold_angle": "45",
-    "support_top_z_distance": "0.15",
-    "top_surface_acceleration": "0",
-    "travel_acceleration": "0",
-    "tree_support_branch_angle": "40",
-    "wall_loops": "2",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.16",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "2",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "0.85",
+	"bridge_speed": "25",
+	"brim_width": "0",
+	"brim_object_gap": "0",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "8000",
+	"outer_wall_acceleration": "8000",
+	"top_surface_acceleration": "8000",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.1",
+	"enable_arc_fitting": "0",
+	"outer_wall_line_width": "0.4",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.4",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "grid",
+	"initial_layer_acceleration": "1000",
+	"travel_acceleration": "8000",
+	"inner_wall_acceleration": "8000",
+	"initial_layer_line_width": "0.4",
+	"initial_layer_print_height": "0.2",
+	"infill_combination": "0",
+	"sparse_infill_line_width": "0.4",
+	"infill_wall_overlap": "23%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.25",
+	"ironing_speed": "15",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "20",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.4",
+	"wall_loops": "2",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "3",
+	"skirt_height": "2",
+	"skirt_loops": "2",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.15",
+	"support_filament": "0",
+	"support_line_width": "0.4",
+	"support_interface_loop_pattern": "0",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "3",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "0.2",
+	"support_interface_speed": "100%",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "0.2",
+	"support_speed": "140",
+	"support_threshold_angle": "40",
+	"support_object_xy_distance": "60%",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "0",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonic",
+	"top_surface_line_width": "0.4",
+	"top_shell_layers": "2",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "40",
+	"initial_layer_infill_speed": "60",
+	"outer_wall_speed": "140",
+	"inner_wall_speed": "160",
+	"internal_solid_infill_speed": "200",
+	"top_surface_speed": "40",
+	"gap_infill_speed": "70",
+	"sparse_infill_speed": "200",
+	"travel_speed": "200",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",	
+	"seam_gap": "5%",
     "compatible_printers": [
         "Comgrow T500 0.4 nozzle"
     ]