Construct 1 XL Start G-code Change (#4336)

* First stage addition of C1 printers

* More updates

* Create Construct 1 XL 0.6 nozzle.json

* More updates

* Updated image format

* Added C1 printer

* Update CONSTRUCT3D.json

* Adding CONSTRUCT3D Printer Files

* Update Construct 1 0.4 nozzle.json

* Slight formatting change

* More Typo Fixes

* Even more typo fixes

* Fixed Error with nozzle variants

* Reversion of accidental changes

* Update Construct 1 XL 0.6 nozzle.json

Updating to remove suspect lines for new future firmware changes

resources/profiles/CONSTRUCT3D/machine/Construct 1 XL 0.6 nozzle.json

@@ -62,7 +62,7 @@
         "40"
     ],
 	"machine_end_gcode": ";Retract the filament\nG92 E1\nG1 E-5 F900\n;Move nozzle fast\nG1 X5 Y369 F15000\n;Move Bed Down\nG1 Z400 F6000\n\n;Set machine to idle\nT-1\nM104 S0\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nM84 ; disable motors\n",
-    "machine_start_gcode": "G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM106 S0 ; Turn Fan off\nM204 S[machine_max_acceleration_extruding] T[machine_max_acceleration_retracting]\nM190 S[first_layer_bed_temperature] ; set bed temp\nM109 S160 ; set extruder temp\nG28 ; home all\nG1 Z15 F6000 ; move the printer down 15mm\nG1 Y1.0 Z0.3 F4000 ; move print head up\nM109 S[first_layer_temperature] ; set extruder temp\n\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] T0 ; wait for extruder temp\nM109 S[first_layer_temperature] T1; wait for extruder temp\nM109 S[first_layer_temperature] T2; wait for extruder temp\nM109 S[first_layer_temperature] T3; wait for extruder temp\n;prime the extruder\nG1 X5 Y2 Z0.3 F6000; go to edge of build volume\nG1 X60 E10 F1000 ;gentle purge start\nG1 X110 E25 F1000; heavy purge\nG1 X60;",
+    "machine_start_gcode": "G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM106 S0 ; Turn Fan off\nM204 S[machine_max_acceleration_extruding] T[machine_max_acceleration_retracting]\nM190 S[first_layer_bed_temperature] ; set bed temp\nM109 S160 ; set extruder temp\nG28 ; home all\nG1 Z15 F6000 ; move the printer down 15mm\nG1 Y1.0 Z0.3 F4000 ; move print head up\nM109 S[first_layer_temperature] ; set extruder temp\n\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] T0 ; wait for extruder temp\n;prime the extruder\nG1 X5 Y2 Z0.3 F6000; go to edge of build volume\nG1 X60 E10 F1000 ;gentle purge start\nG1 X110 E25 F1000; heavy purge\nG1 X60;",
     "max_layer_height": [
         "0.6"
     ],