Keithley 2634b

basil/HL/keithley_2634b.yaml

@@ -6,22 +6,99 @@ identifier : Keithley Instruments Inc., Model 2634B
 channel 1:
     on : smua.source.output = 1
     off : smua.source.output = 0
+    get_on : print(smua.source.output)
     get_current : print(smua.measure.i())
-    set_voltage : smua.source.levelv =
+    set_current : smua.source.leveli =
+    get_source_current : print(smua.source.leveli)
     get_voltage : print(smua.measure.v())
+    set_voltage : smua.source.levelv =
+    get_source_voltage : print(smua.source.levelv)
+    set_current_limit : smua.source.limiti =
+    get_current_limit : print(smua.source.limiti)
+    set_voltage_limit : smua.source.limitv =
+    get_voltage_limit : print(smua.source.limitv)
+    source_volt : smua.source.func = smua.OUTPUT_DCVOLTS
+    source_current : smua.source.func = smua.OUTPUT_DCAMPS
+    get_source_mode : print(smua.source.func)
+    set_voltage_range: smua.source.rangev =
+    get_voltage_range: print(smua.source.rangev)
+    set_voltage_autorange_on: smua.source.autorangev = smua.AUTORANGE_ON
+    set_voltage_autorange_off: smua.source.autorangev = smua.AUTORANGE_OFF
+    set_current_range: smua.source.rangei =
+    get_current_range: print(smua.source.rangei)
+    set_current_autorange_on: smua.source.autorangei = smua.AUTORANGE_ON
+    set_current_autorange_off: smua.source.autorangei = smua.AUTORANGE_OFF
+    four_wire_on: smua.sense = smua.SENSE_REMOTE
+    four_wire_off: smua.sense = smua.SENSE_LOCAL
+    set_current_sense_range: smua.measure.rangei =
+    get_current_sense_range: print(smua.measure.rangei)
+    set_voltage_sense_range: smua.measure.rangev =
+    get_voltage_sense_range: print(smua.measure.rangev)
     set_mode_measure_current : display.smua.measure.func = display.MEASURE_DCAMPS
 
 channel 2:
     on : smub.source.output = 1
     off : smub.source.output = 0
+    get_on : print(smub.source.output)
     get_current : print(smub.measure.i())
-    set_voltage : smub.source.levelv =
+    set_current : smub.source.leveli =
+    get_source_current : print(smub.source.leveli)
     get_voltage : print(smub.measure.v())
+    set_voltage : smub.source.levelv =
+    get_source_voltage : print(smub.source.levelv)
+    set_current_limit : smub.source.limiti =
+    get_current_limit : print(smub.source.limiti)
+    set_voltage_limit : smub.source.limitv =
+    get_voltage_limit : print(smub.source.limitv)
+    source_volt : smub.source.func = smub.OUTPUT_DCVOLTS
+    source_current : smub.source.func = smub.OUTPUT_DCAMPS
+    get_source_mode : print(smub.source.func)
+    set_voltage_range: smub.source.rangev =
+    get_voltage_range: print(smub.source.rangev)
+    set_voltage_autorange_on: smub.source.autorangev = smub.AUTORANGE_ON
+    set_voltage_autorange_off: smub.source.autorangev = smub.AUTORANGE_OFF
+    set_current_range: smub.source.rangei =
+    get_current_range: print(smub.source.rangei)
+    set_current_autorange_on: smub.source.autorangei = smub.AUTORANGE_ON
+    set_current_autorange_off: smub.source.autorangei = smub.AUTORANGE_OFF
+    four_wire_on: smub.sense = smub.SENSE_REMOTE
+    four_wire_off: smub.sense = smub.SENSE_LOCAL
+    set_current_sense_range: smub.measure.rangei =
+    get_current_sense_range: print(smub.measure.rangei)
+    set_voltage_sense_range: smub.measure.rangev =
+    get_voltage_sense_range: print(smub.measure.rangev)
     set_mode_measure_current : display.smub.measure.func = display.MEASURE_DCAMPS
+
 
 on : smua.source.output = 1
 off : smua.source.output = 0
+get_on : print(smua.source.output)
 get_current : print(smua.measure.i())
-set_voltage : smua.source.levelv =
+set_current : smua.source.leveli =
+get_source_current : print(smua.source.leveli)
 get_voltage : print(smua.measure.v())
+set_voltage : smua.source.levelv =
+get_source_voltage : print(smua.source.levelv)
+set_current_limit : smua.source.limiti =
+get_current_limit : print(smua.source.limiti)
+set_voltage_limit : smua.source.limitv =
+get_voltage_limit : print(smua.source.limitv)
+source_volt : smua.source.func = smua.OUTPUT_DCVOLTS
+source_current : smua.source.func = smua.OUTPUT_DCAMPS
+get_source_mode : print(smua.source.func)
+set_voltage_range: smua.source.rangev =
+get_voltage_range: print(smua.source.rangev)
+set_voltage_autorange_on: smua.source.autorangev = smua.AUTORANGE_ON
+set_voltage_autorange_off: smua.source.autorangev = smua.AUTORANGE_OFF
+set_current_range: smua.source.rangei =
+get_current_range: print(smua.source.rangei)
+set_current_autorange_on: smua.source.autorangei = smua.AUTORANGE_ON
+set_current_autorange_off: smua.source.autorangei = smua.AUTORANGE_OFF
+four_wire_on: smua.sense = smua.SENSE_REMOTE
+four_wire_off: smua.sense = smua.SENSE_LOCAL
+set_current_sense_range: smua.measure.rangei =
+get_current_sense_range: print(smua.measure.rangei)
+set_voltage_sense_range: smua.measure.rangev =
+get_voltage_sense_range: print(smua.measure.rangev)
 set_mode_measure_current : display.smua.measure.func = display.MEASURE_DCAMPS
+

examples/lab_devices/keithley2634b.yaml

@@ -0,0 +1,15 @@
+transfer_layer:
+  - name: Serial
+    type: Serial
+    init:
+      port: /dev/ttyUSB5
+      read_termination: "\r\n"
+      baudrate: 19200
+      timeout: 5
+
+hw_drivers:
+  - name: Sourcemeter1
+    type: scpi
+    interface: Serial
+    init:
+      device: Keithley 2634B