update indicator keyboard usage

docs/Network/Meshtastic_Network/SenseCAP_Indicator/sensecap_indicator_meshtastic.md

@@ -39,11 +39,15 @@ SenseCAP Indicator is a 4-inch touchscreen device designed for Meshtastic®, pow
 During the process of continuous optimization and testing of the SenseCAP Indicator for Meshtastic, we found a situation that may affect your experience. In order to ensure that you can continue to enjoy the best product performance, we are currently optimizing this feature, so shipments may be delayed.
 
 **Identified Issue**<br/>
-In the `LONGFAST`, `LONGSLOW`, and `MIDSLOW` settings, message content exceeding `50 bytes` may result in instability and CRC errors.
+In the `LONGFAST`, `LONGSLOW`, and `MIDSLOW` settings, message content exceeding `50 bytes` may result in instability and CRC errors, and message sending may fail.
 
 **Special Service for Previous Purchasers**<br/>
 If you are a previous purchaser and have the same issue, we are offering a special service to assist you. Please contact us at `[email protected]` and include your order number for support.
 
+**Version Upgrading**
+
+We are currently upgrading the version to fix these issues. The new version is expected to be released in `mid-to-late February`.
+
 Thank you for your understanding as we work to provide the best possible user experience.
 :::
 
@@ -256,9 +260,21 @@ Refer to [LoRa Region by Country](https://meshtastic.org/docs/configuration/regi
 
 Now that you have set the LoRa region on your device, you can continue with configuring any [LoRa Configs](https://meshtastic.org/docs/configuration/radio/lora/) to suit your needs.
 
-### Pages Description
+### Keyboard usage
+
+**Step 1**: Navigate to `Settings` -> `Canned Messages`, and enable it.
+
 
+<p style={{textAlign: 'center'}}><img src="https://files.seeedstudio.com/wiki/SenseCAP/Meshtastic/canned.png" alt="pir" width={500} height="auto" /></p>
 
+**Step 2**
+
+On the node page, slide the screen from top to bottom and the keyboard will appear.
+
+
+<div class="table-center">
+    <iframe width="500" height="500" src="https://files.seeedstudio.com/wiki/SenseCAP/Meshtastic/keyboard.mp4" scrolling="no" border="0" frameborder="no" framespacing="0" allowfullscreen="true" autoplay> </iframe>
+</div>
 
 ### Precautions
 

docs/Network/Meshtastic_Network/T1000-E/open_source_lorawan.md

@@ -0,0 +1,204 @@
+---
+description: Get Started with SenseCAP Card Tracker T1000-E for Meshtastic
+title: LoRaWAN Open Source Firmware Tutorial
+keywords:
+- Tracker
+image: https://files.seeedstudio.com/wiki/wiki-platform/S-tempor.png
+slug: /open_source_lorawan
+sidebar_position: 3
+last_update:
+  date: 1/2/2025
+  author: Jessie
+---
+
+
+Good news for all technology enthusiasts! The SenseCAP T1000-E now has an open source LoRaWAN version of the firmware, which provides you with a lot of customization and innovation opportunities. This tutorial will guide you through flashing firmware and using example code.
+
+## Preparation
+
+### Hardware Preparation
+
+* SenseCAP T1000-E x 1
+* USB Cable x 1
+* Computer x 1
+
+
+### Software Preparation
+
+Before you can start developing，the following software tools are required.
+
+#### SEGGER Embedded Studio (SES)
+
+SES is an all-in-one solution for managing, building, testing and deploying embedded applications. This means smooth, efficient development operations thanks to its wide range of features. The powerful project manager enables the management of projects large and small. Version control features enable automatic application deployment.
+
+Download the corresponding installation package according to your operating system.
+
+<a  href="https://www.segger.com/products/development-tools/embedded-studio/" target="_blank"><span>SEGGER Embedded Studio (SES)-Download</span></a>
+
+
+:::tip 
+It's recommended to use 5.68 version.
+:::
+
+<p style={{textAlign: 'center'}}><img src="https://files.seeedstudio.com/wiki/SenseCAP/Wio-WM1110%20Dev%20Kit/5.68version.png" alt="pir" width={800} height="auto" /></p>
+
+
+
+#### nRF5 SDK
+
+The nRF5 SDK provides a rich developing environment for nRF5 Series devices by including a broad selection of drivers, libraries, examples for peripherals, SoftDevices, and proprietary radio protocols.
+
+
+
+<a  href="https://www.nordicsemi.com/Products/Development-software/nRF5-SDK/Download#infotabs" target="_blank"><span>nRF5 SDK-Download</span></a>
+
+<p style={{textAlign: 'center'}}><img src="https://files.seeedstudio.com/wiki/SenseCAP/Wio-WM1110%20Dev%20Kit/SDK_version.png" alt="pir" width={800} height="auto" /></p>
+
+
+#### Seeed T1000-E Example Package
+
+Seeed provides an example project for developers to get started more quickly. This example includes LoRaWAN communication, positioning information acquisition, onboard sensor data acquisition, etc.
+
+<a  href="https://github.com/Seeed-Studio/Seeed_Wio_WM1110_Dev_Board" target="_blank"><span>Seeed Example-Download</span></a>
+
+
+**Add Seeed Example file to nRF5 SDK**
+
+Copy the `Seeed T1000-E Example file` to the following path of nRF5 SDK:
+`.../nRF5_SDK_17.1.0_ddde560/examples/ble_peripheral/`
+
+<p style={{textAlign: 'center'}}><img src="https://files.seeedstudio.com/wiki/SenseCAP/Wio-WM1110%20Dev%20Kit/copyfile.png" alt="pir" width={800} height="auto" /></p>
+
+
+
+
+
+### Flash Bootloader
+
+* **Bootloader Download**
+
+**Step 1:** Enter DFU mode
+
+
+Connect the USB cable to your PC, press and hold the device button, then connect the charging cable, there should be a driver named `T1000-E` display.
+
+
+<p style={{textAlign: 'center'}}><img src="https://files.seeedstudio.com/wiki/SenseCAP/Meshtastic/file-path.png" alt="pir" width={600} height="auto" /></p>
+
+
+**Step 2:** Flash Bootloader
+
+
+Copy `UF2` file to the DFU drive. Firmware should be flashed after the file is downloaded and the device reboots.
+
+The correct bootloader information is shown in the figure：
+
+<p style={{textAlign: 'center'}}><img src="https://files.seeedstudio.com/wiki/SenseCAP/Meshtastic/bootloader-info.png" alt="pir" width={600} height="auto" /></p>
+
+
+
+### Run Example Project
+
+
+**Import Example Project**
+
+Here we take `08_ses_lorawan_gnss` project as an example.
+Open SES and open the example project.
+
+<p style={{textAlign: 'center'}}><img src="https://files.seeedstudio.com/wiki/SenseCAP/Wio-WM1110%20Dev%20Kit/opensolution.png" alt="pir" width={800} height="auto" /></p>
+
+
+
+
+**Modify the LoRaWAN Params**
+
+Define the REGION/DEVICE_EUI/JOIN_EUI/APP_KEY in `lorawan_key_config.h`.
+
+
+<p style={{textAlign: 'center'}}><img src="https://files.seeedstudio.com/wiki/SenseCAP/Meshtastic/keys-define.png" alt="pir" width={800} height="auto" /></p>
+
+**Build the modified project**
+
+
+Select the required project in the Project Explorer.<br/>
+Choose `Build` > `Build` or press `F7`.
+
+
+<p style={{textAlign: 'center'}}><img src="https://files.seeedstudio.com/wiki/SenseCAP/Meshtastic/build-done.png" alt="pir" width={800} height="auto" /></p>
+
+
+#### Convert to UF2 file
+
+After the build is successful, there will be a `.hex` file in the output folder, we have included a Python script `uf2conv.py` in `Firmware` folder to convert the hex file to uf2 file.
+
+
+Navigate to the file path and run the script:
+
+```py
+python uf2conv.py filename.hex -c -f 0xADA52840 -o filename.uf2
+```
+
+
+<p style={{textAlign: 'center'}}><img src="https://files.seeedstudio.com/wiki/SenseCAP/Meshtastic/convert-uf2.png" alt="pir" width={600} height="auto" /></p>
+
+
+#### Flash the Application Firmware
+
+
+
+
+### Connect to a LNS
+
+
+In this section, we will connect the device to the LNS (here we take TTN as an example) to view the data, and check the location via TTN Mapper.
+
+
+To begin, register for an account with The Things Industries or The Things Network.
+
+
+#### Step 1: Create an application
+
+Navigate to Applications page, click "+Create application".
+
+<p style={{textAlign: 'center'}}><img src="https://files.seeedstudio.com/wiki/SenseCAP/Wio-WM1110%20Dev%20Kit/create_application.png" alt="pir" width={800} height="auto" /></p>
+
+Enter an Application ID, click Create Application to save your changes.
+
+<p style={{textAlign: 'center'}}><img src="https://files.seeedstudio.com/wiki/SenseCAP/Wio-WM1110%20Dev%20Kit/create_application1.png" alt="pir" width={800} height="auto" /></p>
+
+
+#### Step 2: Register the Device
+
+
+Click "Register end device".
+
+
+<p style={{textAlign: 'center'}}><img src="https://files.seeedstudio.com/wiki/SenseCAP/Wio-WM1110%20Dev%20Kit/register_device.png" alt="pir" width={800} height="auto" /></p>
+
+Set the following parameters:
+
+**Frequency Plan**: Select the appropriate Frequency plan for the target region
+
+**LoRaWAN version**:LoRaWAN Specification 1.0.4
+
+**Regional Parameters version**: PR002 Regional Parameters V1.0.3
+
+
+<p style={{textAlign: 'center'}}><img src="https://files.seeedstudio.com/wiki/SenseCAP/Wio-WM1110%20Dev%20Kit/register_device1.png" alt="pir" width={800} height="auto" /></p>
+
+
+:::tip 
+JoinEUI/DevEUI/APPEUI: Which you defined in the 'lorawan_key_config.h' file in the previous setting.
+:::
+
+
+<p style={{textAlign: 'center'}}><img src="https://files.seeedstudio.com/wiki/SenseCAP/Wio-WM1110%20Dev%20Kit/register_device5.png" alt="pir" width={800} height="auto" /></p>
+
+
+**Check Live Data**
+
+<p style={{textAlign: 'center'}}><img src="https://files.seeedstudio.com/wiki/SenseCAP/Meshtastic/payload-data.png" alt="pir" width={800} height="auto" /></p>
+
+
+
+