Skip to content

Commit

Permalink
Handle one tip type
Browse files Browse the repository at this point in the history
  • Loading branch information
@Ralim
Ralim committed Sep 22, 2024
1 parent 428fe6c commit 156b6e4
Show file tree
Hide file tree
Showing 4 changed files with 65 additions and 63 deletions.
2 changes: 1 addition & 1 deletion source/Core/BSP/MHP30/configuration.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -147,7 +147,7 @@
#define MIN_BOOST_TEMP_F 300 // The min settable temp for boost mode °F
#define NO_DISPLAY_ROTATE // Disable OLED rotation by accel
#define SLEW_LIMIT 50 // Limit to 3.0 Watts per 64ms pid loop update rate slew rate

#define TIPTYPE_MHP30 1 // It's own special tip
#define ACCEL_SC7
#define ACCEL_MSA

Expand Down
2 changes: 2 additions & 0 deletions source/Core/BSP/Miniware/configuration.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -233,6 +233,8 @@
#define I2C_SOFT_BUS_2 1
#define LIS_ORI_FLIP
#define OLED_FLIP
#define TIPTYPE_TS80 1 // Only one tip type so far

#endif /* TS80(P) */

#ifdef MODEL_TS80
Expand Down
14 changes: 7 additions & 7 deletions source/Core/Inc/Settings.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -132,13 +132,13 @@ typedef enum {
T12_6_2_OHM, // Short Tips manufactured by Pine64
T12_4_OHM, // Longer tip but low resistance for PTS200
#endif
#ifdef TIPTYE_TS80
TS80_4_5_OHM, // TS80(P) default tips
// We do not know of other tuning tips (?yet?)
#endif
#ifdef TIPTYPE_JBC
JBC_210_2_5_OHM, // Small JBC tips as used in the S60/S60P
#endif
// #ifdef TIPTYPE_TS80
// TS80_4_5_OHM, // TS80(P) default tips
// // We do not know of other tuning tips (?yet?)
// #endif
// #ifdef TIPTYPE_JBC
// JBC_210_2_5_OHM, // Small JBC tips as used in the S60/S60P
// #endif
TIP_TYPE_MAX, // Max value marker
} tipType_t;
uint8_t getUserSelectedTipResistance(); // returns the resistance matching the selected tip type or 0 for auto
Expand Down
110 changes: 55 additions & 55 deletions source/Core/Src/Settings.cpp
View file
Original file line number Diff line number Diff line change
Expand Up @@ -55,61 +55,61 @@ typedef struct {

static const SettingConstants settingsConstants[(int)SettingsOptions::SettingsOptionsLength] = {
//{ min, max, increment, default}
{ MIN_TEMP_C, MAX_TEMP_F, 5, SOLDERING_TEMP}, // SolderingTemp
{ MIN_TEMP_C, MAX_TEMP_F, 5, 150}, // SleepTemp
{ 0, 15, 1, SLEEP_TIME}, // SleepTime
{ 0, 4, 1, CUT_OUT_SETTING}, // MinDCVoltageCells
{ 24, 38, 1, RECOM_VOL_CELL}, // MinVoltageCells
{ 90, QC_VOLTAGE_MAX, 2, 90}, // QCIdealVoltage
{ 0, MAX_ORIENTATION_MODE, 1, ORIENTATION_MODE}, // OrientationMode
{ 0, 9, 1, SENSITIVITY}, // Sensitivity
{ 0, 1, 1, ANIMATION_LOOP}, // AnimationLoop
{ 0, settingOffSpeed_t::MAX_VALUE - 1, 1, ANIMATION_SPEED}, // AnimationSpeed
{ 0, 3, 1, AUTO_START_MODE}, // AutoStartMode
{ 0, 60, 1, SHUTDOWN_TIME}, // ShutdownTime
{ 0, 1, 1, COOLING_TEMP_BLINK}, // CoolingTempBlink
{ 0, 1, 1, DETAILED_IDLE}, // DetailedIDLE
{ 0, 1, 1, DETAILED_SOLDERING}, // DetailedSoldering
{ 0, (uint16_t)(HasFahrenheit ? 1 : 0), 1, TEMPERATURE_INF}, // TemperatureInF
{ 0, 1, 1, DESCRIPTION_SCROLL_SPEED}, // DescriptionScrollSpeed
{ 0, 2, 1, LOCKING_MODE}, // LockingMode
{ 0, 99, 1, POWER_PULSE_DEFAULT}, // KeepAwakePulse
{ 1, POWER_PULSE_WAIT_MAX, 1, POWER_PULSE_WAIT_DEFAULT}, // KeepAwakePulseWait
{ 1, POWER_PULSE_DURATION_MAX, 1, POWER_PULSE_DURATION_DEFAULT}, // KeepAwakePulseDuration
{ 360, 900, 1, VOLTAGE_DIV}, // VoltageDiv
{ 0, MAX_TEMP_F, 10, BOOST_TEMP}, // BoostTemp
{MIN_CALIBRATION_OFFSET, 2500, 1, CALIBRATION_OFFSET}, // CalibrationOffset
{ 0, MAX_POWER_LIMIT, POWER_LIMIT_STEPS, POWER_LIMIT}, // PowerLimit
{ 0, 1, 1, REVERSE_BUTTON_TEMP_CHANGE}, // ReverseButtonTempChangeEnabled
{ 5, TEMP_CHANGE_LONG_STEP_MAX, 5, TEMP_CHANGE_LONG_STEP}, // TempChangeLongStep
{ 1, TEMP_CHANGE_SHORT_STEP_MAX, 1, TEMP_CHANGE_SHORT_STEP}, // TempChangeShortStep
{ 0, 9, 1, 7}, // HallEffectSensitivity
{ 0, 9, 1, 0}, // AccelMissingWarningCounter
{ 0, 9, 1, 0}, // PDMissingWarningCounter
{ 0, 0xFFFF, 0, 41431 /*EN*/}, // UILanguage
{ 0, 50, 1, 20}, // PDNegTimeout
{ 0, 1, 1, 0}, // OLEDInversion
{ MIN_BRIGHTNESS, MAX_BRIGHTNESS, BRIGHTNESS_STEP, DEFAULT_BRIGHTNESS}, // OLEDBrightness
{ 0, 6, 1, 1}, // LOGOTime
{ 0, 1, 1, 0}, // CalibrateCJC
{ 0, 1, 1, 0}, // BluetoothLE
{ 0, 2, 1, 1}, // USBPDMode
{ 1, 5, 1, 4}, // ProfilePhases
{ MIN_TEMP_C, MAX_TEMP_F, 5, 90}, // ProfilePreheatTemp
{ 1, 10, 1, 1}, // ProfilePreheatSpeed
{ MIN_TEMP_C, MAX_TEMP_F, 5, 130}, // ProfilePhase1Temp
{ 10, 180, 5, 90}, // ProfilePhase1Duration
{ MIN_TEMP_C, MAX_TEMP_F, 5, 140}, // ProfilePhase2Temp
{ 10, 180, 5, 30}, // ProfilePhase2Duration
{ MIN_TEMP_C, MAX_TEMP_F, 5, 165}, // ProfilePhase3Temp
{ 10, 180, 5, 30}, // ProfilePhase3Duration
{ MIN_TEMP_C, MAX_TEMP_F, 5, 140}, // ProfilePhase4Temp
{ 10, 180, 5, 30}, // ProfilePhase4Duration
{ MIN_TEMP_C, MAX_TEMP_F, 5, 90}, // ProfilePhase5Temp
{ 10, 180, 5, 30}, // ProfilePhase5Duration
{ 1, 10, 1, 2}, // ProfileCooldownSpeed
{ 0, 12, 1, 0}, // HallEffectSleepTime
{ 0, tipType_t::TIP_TYPE_MAX - 1, 1, 0}, // SolderingTipType
{ MIN_TEMP_C, MAX_TEMP_F, 5, SOLDERING_TEMP}, // SolderingTemp
{ MIN_TEMP_C, MAX_TEMP_F, 5, 150}, // SleepTemp
{ 0, 15, 1, SLEEP_TIME}, // SleepTime
{ 0, 4, 1, CUT_OUT_SETTING}, // MinDCVoltageCells
{ 24, 38, 1, RECOM_VOL_CELL}, // MinVoltageCells
{ 90, QC_VOLTAGE_MAX, 2, 90}, // QCIdealVoltage
{ 0, MAX_ORIENTATION_MODE, 1, ORIENTATION_MODE}, // OrientationMode
{ 0, 9, 1, SENSITIVITY}, // Sensitivity
{ 0, 1, 1, ANIMATION_LOOP}, // AnimationLoop
{ 0, settingOffSpeed_t::MAX_VALUE - 1, 1, ANIMATION_SPEED}, // AnimationSpeed
{ 0, 3, 1, AUTO_START_MODE}, // AutoStartMode
{ 0, 60, 1, SHUTDOWN_TIME}, // ShutdownTime
{ 0, 1, 1, COOLING_TEMP_BLINK}, // CoolingTempBlink
{ 0, 1, 1, DETAILED_IDLE}, // DetailedIDLE
{ 0, 1, 1, DETAILED_SOLDERING}, // DetailedSoldering
{ 0, (uint16_t)(HasFahrenheit ? 1 : 0), 1, TEMPERATURE_INF}, // TemperatureInF
{ 0, 1, 1, DESCRIPTION_SCROLL_SPEED}, // DescriptionScrollSpeed
{ 0, 2, 1, LOCKING_MODE}, // LockingMode
{ 0, 99, 1, POWER_PULSE_DEFAULT}, // KeepAwakePulse
{ 1, POWER_PULSE_WAIT_MAX, 1, POWER_PULSE_WAIT_DEFAULT}, // KeepAwakePulseWait
{ 1, POWER_PULSE_DURATION_MAX, 1, POWER_PULSE_DURATION_DEFAULT}, // KeepAwakePulseDuration
{ 360, 900, 1, VOLTAGE_DIV}, // VoltageDiv
{ 0, MAX_TEMP_F, 10, BOOST_TEMP}, // BoostTemp
{MIN_CALIBRATION_OFFSET, 2500, 1, CALIBRATION_OFFSET}, // CalibrationOffset
{ 0, MAX_POWER_LIMIT, POWER_LIMIT_STEPS, POWER_LIMIT}, // PowerLimit
{ 0, 1, 1, REVERSE_BUTTON_TEMP_CHANGE}, // ReverseButtonTempChangeEnabled
{ 5, TEMP_CHANGE_LONG_STEP_MAX, 5, TEMP_CHANGE_LONG_STEP}, // TempChangeLongStep
{ 1, TEMP_CHANGE_SHORT_STEP_MAX, 1, TEMP_CHANGE_SHORT_STEP}, // TempChangeShortStep
{ 0, 9, 1, 7}, // HallEffectSensitivity
{ 0, 9, 1, 0}, // AccelMissingWarningCounter
{ 0, 9, 1, 0}, // PDMissingWarningCounter
{ 0, 0xFFFF, 0, 41431 /*EN*/}, // UILanguage
{ 0, 50, 1, 20}, // PDNegTimeout
{ 0, 1, 1, 0}, // OLEDInversion
{ MIN_BRIGHTNESS, MAX_BRIGHTNESS, BRIGHTNESS_STEP, DEFAULT_BRIGHTNESS}, // OLEDBrightness
{ 0, 6, 1, 1}, // LOGOTime
{ 0, 1, 1, 0}, // CalibrateCJC
{ 0, 1, 1, 0}, // BluetoothLE
{ 0, 2, 1, 1}, // USBPDMode
{ 1, 5, 1, 4}, // ProfilePhases
{ MIN_TEMP_C, MAX_TEMP_F, 5, 90}, // ProfilePreheatTemp
{ 1, 10, 1, 1}, // ProfilePreheatSpeed
{ MIN_TEMP_C, MAX_TEMP_F, 5, 130}, // ProfilePhase1Temp
{ 10, 180, 5, 90}, // ProfilePhase1Duration
{ MIN_TEMP_C, MAX_TEMP_F, 5, 140}, // ProfilePhase2Temp
{ 10, 180, 5, 30}, // ProfilePhase2Duration
{ MIN_TEMP_C, MAX_TEMP_F, 5, 165}, // ProfilePhase3Temp
{ 10, 180, 5, 30}, // ProfilePhase3Duration
{ MIN_TEMP_C, MAX_TEMP_F, 5, 140}, // ProfilePhase4Temp
{ 10, 180, 5, 30}, // ProfilePhase4Duration
{ MIN_TEMP_C, MAX_TEMP_F, 5, 90}, // ProfilePhase5Temp
{ 10, 180, 5, 30}, // ProfilePhase5Duration
{ 1, 10, 1, 2}, // ProfileCooldownSpeed
{ 0, 12, 1, 0}, // HallEffectSleepTime
{ 0, (tipType_t::TIP_TYPE_MAX - 1) > 0 ? (tipType_t::TIP_TYPE_MAX - 1) : 0, 1, 0}, // SolderingTipType
};
static_assert((sizeof(settingsConstants) / sizeof(SettingConstants)) == ((int)SettingsOptions::SettingsOptionsLength));

Expand Down

0 comments on commit 156b6e4

Please sign in to comment.