Update config for Metal Simple (Model 1403)

Printrbot · Jul 3, 2014 · a23be54 · a23be54
1 parent 337c426
commit a23be54
Showing 1 changed file with 9 additions and 9 deletions.
diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h
@@ -290,12 +290,12 @@ const bool Z_MAX_ENDSTOP_INVERTING = false; // set to true to invert the logic o
 #define DISABLE_Z true
 #define DISABLE_E false // For all extruders
 
-#define INVERT_X_DIR true    // for Mendel set to false, for Orca set to true
+#define INVERT_X_DIR false    // for Mendel set to false, for Orca set to true
 #define INVERT_Y_DIR true    // for Mendel set to true, for Orca set to false
-#define INVERT_Z_DIR true     // for Mendel set to false, for Orca set to true
-#define INVERT_E0_DIR false   // for direct drive extruder v9 set to true, for geared extruder set to false
-#define INVERT_E1_DIR false    // for direct drive extruder v9 set to true, for geared extruder set to false
-#define INVERT_E2_DIR false   // for direct drive extruder v9 set to true, for geared extruder set to false
+#define INVERT_Z_DIR false     // for Mendel set to false, for Orca set to true
+#define INVERT_E0_DIR true   // for direct drive extruder v9 set to true, for geared extruder set to false
+#define INVERT_E1_DIR true    // for direct drive extruder v9 set to true, for geared extruder set to false
+#define INVERT_E2_DIR true   // for direct drive extruder v9 set to true, for geared extruder set to false
 
 // ENDSTOP SETTINGS:
 // Sets direction of endstops when homing; 1=MAX, -1=MIN
@@ -307,11 +307,11 @@ const bool Z_MAX_ENDSTOP_INVERTING = false; // set to true to invert the logic o
 #define max_software_endstops true  // If true, axis won't move to coordinates greater than the defined lengths below.
 
 // Travel limits after homing
-#define X_MAX_POS_DEFAULT 152.4
+#define X_MAX_POS_DEFAULT 150
 #define X_MIN_POS_DEFAULT 0
-#define Y_MAX_POS_DEFAULT 152.4
+#define Y_MAX_POS_DEFAULT 150
 #define Y_MIN_POS_DEFAULT 0
-#define Z_MAX_POS_DEFAULT 152.4
+#define Z_MAX_POS_DEFAULT 150
 #define Z_MIN_POS_DEFAULT 0
 
 #define X_MAX_LENGTH (base_max_pos[0] - base_min_pos[0])
@@ -395,7 +395,7 @@ const bool Z_MAX_ENDSTOP_INVERTING = false; // set to true to invert the logic o
 
 // default settings
 
-#define DEFAULT_AXIS_STEPS_PER_UNIT   {80,80,2020,96}
+#define DEFAULT_AXIS_STEPS_PER_UNIT   {80,80,2020,94.5}
 #define DEFAULT_MAX_FEEDRATE          {100, 100, 2, 14}    // (mm/sec)    
 #define DEFAULT_MAX_ACCELERATION      {2000,2000,30,10000}    // X, Y, Z, E maximum start speed for accelerated moves. E default values are good for skeinforge 40+, for older versions raise them a lot.