Update bed thermistor, move to single firmware for rev F

Per request from Nick @ PBHQ - updated thermistor for heated bed. Also in same request - move to single hex file to be used for all models, so I set defaults for smallest build area (Play). Updated version string reported for M115.
Printrbot · Jun 30, 2015 · 894939d · 894939d
1 parent 4445fea
commit 894939d
Show file tree

Hide file tree

Showing 2 changed files with 18 additions and 17 deletions.
diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h
@@ -16,7 +16,7 @@
 // startup. Implementation of an idea by Prof Braino to inform user that any changes made to this
 // build by the user have been successfully uploaded into firmware.
 #define STRING_VERSION_CONFIG_H __DATE__ " " __TIME__ // build date and time
-#define STRING_CONFIG_H_AUTHOR "(lwalkera, Printrbot firmware)" // Who made the changes.
+#define STRING_CONFIG_H_AUTHOR "(j-laird, Printrbot firmware)" // Who made the changes.
 
 // SERIAL_PORT selects which serial port should be used for communication with the host.
 // This allows the connection of wireless adapters (for instance) to non-default port pins.
@@ -125,7 +125,7 @@
 #define TEMP_SENSOR_0 1
 #define TEMP_SENSOR_1 1
 #define TEMP_SENSOR_2 1
-#define TEMP_SENSOR_BED 1
+#define TEMP_SENSOR_BED 7
 
 // This makes temp sensor 1 a redundant sensor for sensor 0. If the temperatures difference between these sensors is to high the print will be aborted.
 //#define TEMP_SENSOR_1_AS_REDUNDANT
@@ -301,18 +301,18 @@ const bool Z_MAX_ENDSTOP_INVERTING = false; // set to true to invert the logic o
 // ENDSTOP SETTINGS:
 // Sets direction of endstops when homing; 1=MAX, -1=MIN
 #define X_HOME_DIR -1
-#define Y_HOME_DIR -1
+#define Y_HOME_DIR 1
 #define Z_HOME_DIR -1
 
 #define min_software_endstops true // If true, axis won't move to coordinates less than HOME_POS.
 #define max_software_endstops true  // If true, axis won't move to coordinates greater than the defined lengths below.
 
 // Travel limits after homing
-#define X_MAX_POS_DEFAULT 205
+#define X_MAX_POS_DEFAULT 100
 #define X_MIN_POS_DEFAULT 0
-#define Y_MAX_POS_DEFAULT 205
+#define Y_MAX_POS_DEFAULT 100
 #define Y_MIN_POS_DEFAULT 0
-#define Z_MAX_POS_DEFAULT 200
+#define Z_MAX_POS_DEFAULT 100
 #define Z_MIN_POS_DEFAULT 0
 
 #define X_MAX_LENGTH (base_max_pos[0] - base_min_pos[0])
@@ -396,7 +396,7 @@ const bool Z_MAX_ENDSTOP_INVERTING = false; // set to true to invert the logic o
 
 // default settings
 
-#define DEFAULT_AXIS_STEPS_PER_UNIT   {63.36,63.36,2272.72,590}
+#define DEFAULT_AXIS_STEPS_PER_UNIT   {80,80,2020,94.5}
 #define DEFAULT_MAX_FEEDRATE          {100, 100, 2, 14}    // (mm/sec)    
 #define DEFAULT_MAX_ACCELERATION      {2000,2000,30,10000}    // X, Y, Z, E maximum start speed for accelerated moves. E default values are good for skeinforge 40+, for older versions raise them a lot.
 

diff --git a/Marlin/language.h b/Marlin/language.h
@@ -22,6 +22,7 @@
 #endif
 
 #define PROTOCOL_VERSION "1.0"
+#define FIRMWARE_NAME "PB Marlin Rev F v2"
 
 #if MOTHERBOARD == 7 || MOTHERBOARD == 71 || MOTHERBOARD == 72
 	#define MACHINE_NAME "Ultimaker"
@@ -34,7 +35,7 @@
 	#define FIRMWARE_URL "http://3dprint.elettronicain.it/"
 #elif MOTHERBOARD == 81 | MOTHERBOARD == 84
 	#define MACHINE_NAME "Printrbot"
-	#define FIRMWARE_URL "http://printrbot.com"
+	#define FIRMWARE_URL "https://github.com/Printrbot/Marlin"
 #else
 	#ifdef CUSTOM_MENDEL_NAME
 		#define MACHINE_NAME CUSTOM_MENDEL_NAME
@@ -173,7 +174,7 @@
 	#define MSG_HEATING_COMPLETE "Heating done."
 	#define MSG_BED_HEATING "Bed Heating."
 	#define MSG_BED_DONE "Bed done."
-	#define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) " UUID:" MACHINE_UUID "\n"
+	#define MSG_M115_REPORT "FIRMWARE_NAME:" FIRMWARE_NAME " FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) " UUID:" MACHINE_UUID "\n"
 	#define MSG_COUNT_X " Count X: "
 	#define MSG_ERR_KILLED "Printer halted. kill() called!"
 	#define MSG_ERR_STOPPED "Printer stopped due to errors. Fix the error and use M999 to restart. (Temperature is reset. Set it after restarting)"
@@ -341,7 +342,7 @@
 	#define MSG_HEATING_COMPLETE "Nagrzewanie ekstrudera zakonczone."
 	#define MSG_BED_HEATING "Nagrzewanie loza..."
 	#define MSG_BED_DONE "Nagrzewanie loza zakonczone."
-	#define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) " UUID:" MACHINE_UUID "\n"
+	#define MSG_M115_REPORT "FIRMWARE_NAME:" FIRMWARE_NAME " FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) " UUID:" MACHINE_UUID "\n"
 	#define MSG_COUNT_X " Liczenie X: "
 	#define MSG_ERR_KILLED "Drukarka zatrzymana. Wywolano kill()"
 	#define MSG_ERR_STOPPED "Drukarka zatrzymana z powodu bledu. Usun problem i zrestartuj drukartke komenda M999. (temperatura zostala zresetowana; ustaw temperature po restarcie)"
@@ -508,7 +509,7 @@
 	#define MSG_HEATING_COMPLETE "Chauffe terminee."
 	#define MSG_BED_HEATING "Chauffe du lit."
 	#define MSG_BED_DONE "Chauffe du lit terminee."
-	#define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) " UUID:" MACHINE_UUID "\n"
+	#define MSG_M115_REPORT "FIRMWARE_NAME:" FIRMWARE_NAME " FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) " UUID:" MACHINE_UUID "\n"
 	#define MSG_COUNT_X " Compteur X: "
 	#define MSG_ERR_KILLED "Impression arretee. kill() appelee!"
 	#define MSG_ERR_STOPPED "Impression arretee a cause d'erreurs. Corriger les erreurs et utiliser M999 pour la reprendre. (Temperature remise a zero. Reactivez la apres redemarrage)"
@@ -678,7 +679,7 @@
 	#define MSG_HEATING_COMPLETE "Heating done."
 	#define MSG_BED_HEATING "Bed Heating."
 	#define MSG_BED_DONE "Bed done."
-	#define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) " UUID:" MACHINE_UUID "\n"
+	#define MSG_M115_REPORT "FIRMWARE_NAME:" FIRMWARE_NAME " FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) " UUID:" MACHINE_UUID "\n"
 	#define MSG_COUNT_X " Count X:"
 	#define MSG_ERR_KILLED "Printer halted. kill() called !!"
 	#define MSG_ERR_STOPPED "Printer stopped due to errors. Fix the error and use M999 to restart!"
@@ -852,7 +853,7 @@
 	#define MSG_HEATING_COMPLETE "Calentamiento Hecho."
 	#define MSG_BED_HEATING "Calentando la base."
 	#define MSG_BED_DONE "Base Caliente."
-	#define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) " UUID:" MACHINE_UUID "\n"
+	#define MSG_M115_REPORT "FIRMWARE_NAME:" FIRMWARE_NAME " FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) " UUID:" MACHINE_UUID "\n"
 	#define MSG_COUNT_X " Cuenta X:"
 	#define MSG_ERR_KILLED "¡¡Impresora Parada con kill()!!"
 	#define MSG_ERR_STOPPED "¡Impresora parada por errores. Arregle el error y use M999 Para reiniciar!. (La temperatura se reestablece. Ajustela antes de continuar)"
@@ -1016,7 +1017,7 @@
 	#define MSG_HEATING_COMPLETE				"Наргето.    "
 	#define MSG_BED_HEATING						"Нагрев стола...     "
 	#define MSG_BED_DONE						"Стол нагрет.        "
-	#define MSG_M115_REPORT						"FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) " UUID:" MACHINE_UUID "\n"
+	#define MSG_M115_REPORT						"FIRMWARE_NAME:" FIRMWARE_NAME " FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) " UUID:" MACHINE_UUID "\n"
 	#define MSG_COUNT_X							" Count X:"
 	#define MSG_ERR_KILLED						"Принтер остановлен. вызов kill() !!"
 	#define MSG_ERR_STOPPED						"Ошибка принтера, останов. Устраните неисправность и используйте M999 для перезагрузки!. (Температура недоступна. Проверьте датчики)"
@@ -1180,7 +1181,7 @@
 	#define MSG_HEATING_COMPLETE     "Stampante Calda."
 	#define MSG_BED_HEATING          "Riscaldamento Piatto."
 	#define MSG_BED_DONE             "Piatto Pronto."
-	#define MSG_M115_REPORT          "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) " UUID:" MACHINE_UUID "\n"
+	#define MSG_M115_REPORT          "FIRMWARE_NAME:" FIRMWARE_NAME " FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) " UUID:" MACHINE_UUID "\n"
 	#define MSG_COUNT_X              " Calcola X: "
 	#define MSG_ERR_KILLED           "Stampante Calda. kill() chiamata !!"
 	#define MSG_ERR_STOPPED          "Stampante fermata a causa di errori. Risolvi l'errore e usa M999 per ripartire!. (Reset temperatura. Impostala prima di ripartire)"
@@ -1353,7 +1354,7 @@
 	#define MSG_HEATING_COMPLETE "Aquecido."
 	#define MSG_BED_HEATING "Aquecendo a Base."
 	#define MSG_BED_DONE "Base quente."
-	#define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) " UUID:" MACHINE_UUID "\n"
+	#define MSG_M115_REPORT "FIRMWARE_NAME:" FIRMWARE_NAME " FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) " UUID:" MACHINE_UUID "\n"
 	#define MSG_COUNT_X " Conta X:"
 	#define MSG_ERR_KILLED "Impressora parada com kill() !!"
 	#define MSG_ERR_STOPPED "Impressora parada por erros. Coserte o erro e use M999 para recomeçar!. (Temperatura reiniciada. Ajuste antes de recomeçar)"
@@ -1522,7 +1523,7 @@
 	#define MSG_HEATING_COMPLETE "Lammitys valmis."
 	#define MSG_BED_HEATING "Alusta lampiaa."
 	#define MSG_BED_DONE "Alusta valmis."
-	#define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) " UUID:" MACHINE_UUID "\n"
+	#define MSG_M115_REPORT "FIRMWARE_NAME:" FIRMWARE_NAME " FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) " UUID:" MACHINE_UUID "\n"
 	#define MSG_COUNT_X " Laskuri X: "
 	#define MSG_ERR_KILLED "Tulostin pysaytetty. kill():ia kutsuttu!"
 	#define MSG_ERR_STOPPED "Tulostin pysaytetty virheiden vuoksi. Korjaa virheet ja kayta M999 kaynnistaaksesi uudelleen. (Lampotila nollattiin. Aseta lampotila sen jalkeen kun jatkat.)"