v0.21.3

What's Changed

• Fixed an issue where the wrong RPC was used when transforming PublicClient (viem) to Provider (ethers) (@spsjvc in #226)

Full Changelog: v0.21.2...v0.21.3

v0.21.2

What's Changed

Support for non-18 decimal custom gas tokens

This release adds support for non-18 decimal custom gas tokens. Added by @chrstph-dvx and @spsjvc in #216 and #219.

The necessary scaling is done in the background for you. However, if you need to do any scaling yourself (e.g. for approvals), we've provided the following utilities - scaleFrom18DecimalsToNativeTokenDecimals and scaleFromNativeTokenDecimalsTo18Decimals.

This release also bumps the version of @arbitrum/sdk to v4.0.2.

Other

• Added prepareArbitrumNetwork for easier compatibility with @arbitrum/sdk (@chrstph-dvx in #221)
• Exported several retryable fee utils (@spsjvc in #220):
  • createRollupGetRetryablesFees
  • createRollupGetRetryablesFeesWithDefaults
  • createRollupDefaultRetryablesFees
  • createTokenBridgeDefaultRetryablesFees
• Exported several ERC-20 utils (@spsjvc in #224):
  • fetchAllowance
  • fetchDecimals

Full Changelog: v0.21.1...v0.21.2

v0.21.1

What's Changed

• Added extra buffer to createRollup retryable fees (@spsjvc in #217)

Full Changelog: v0.21.0...v0.21.1

v0.21.0

What's Changed

Custom Parent Chains

This release adds in functionality to use custom parent chains which are not supported by default. Added by @spsjvc in #181.

Register a custom parent chain by calling registerCustomParentChain with the custom parent chain object as the argument.
The object needs to be a viem Chain with the RollupCreator and TokenBridgeCreator contract addresses filled in:

registerCustomParentChain({
  id: 123,
  name: `My Chain`,
  network: `my-chain`,
  nativeCurrency: { 
    name: 'Ether', 
    symbol: 'ETH', 
    decimals: 18
  },
  rpcUrls: {
    public: { 
      http: ['http://localhost:3000'] },
      default: { http: ['http://localhost:3000'] 
    },
  },
  // the following contract addresses have to be provided
  contracts: {
    rollupCreator: { address: '0x1000000000000000000000000000000000000000' },
    tokenBridgeCreator: { address: '0x2000000000000000000000000000000000000000' },
  },
})

Note that if you're using a custom parent chain, defaults for certain functions can't be provided, so you'll have to specify those values:

• createRollupPrepareDeploymentParamsConfig
  • params.confirmPeriodBlocks will be required
  • params.sequencerInboxMaxTimeVariation will be required
• createRollupPrepareTransactionRequest and createRollup
  • params.maxDataSize will be required
• prepareNodeConfig
  • parentChainIsArbitrum will be required

Other

• Updated createRollupFetchTransactionHash to allow fromBlock override (@spsjvc in #213)
• Updated long-range log query handling (@chrstph-dvx in #208)
  • Long-range log queries will be split into several in case the RPC has a limit (will take longer but won't fail with an error)

Full Changelog: v0.20.1...v0.21.0

v0.20.1

What's Changed

• Fixed an issue with createRollupPrepareTransactionRequest retryable fee estimation (@spsjvc in 85785a5, fdb7d29)

Full Changelog: v0.20.0...v0.20.1

v0.20.0

What's Changed

• Updated the default ArbOS version to ArbOS 32 (@spsjvc in #162)
• Updated retryable fee estimation, which should make things more stable in case of parent base fee spikes
  • Updated createRollupPrepareTransactionRequest to make the retryable fee dynamic (@spsjvc in #193, #194, #200)
  • Updated createTokenBridgePrepareTransactionRequest retryable fee estimation (@spsjvc in #196, #197, #200)
• Updated createTokenBridge and createTokenBridgePrepareTransactionRequest to throw with a custom error in case the token bridge contracts are already deployed for the Rollup (@chrstph-dvx in #186, @spsjvc in #201, #202)
  • Added a new function isTokenBridgeDeployed to check for this scenario
  • Previously, the functions would throw while waiting for retryables to execute
• Updated node params needed in the example for fast withdrawals (@TucksonDev in #183)

Full Changelog: v0.19.0...v0.20.0

v0.20.0-beta.0

What's Changed

• Added the option to use custom parent chains (@spsjvc in #181)

Register a custom parent chain by calling registerCustomParentChain with the custom parent chain object as the argument. The object needs to be a viem Chain object with the RollupCreator and TokenBridgeCreator contract addresses filled out:

registerCustomParentChain({
  id: 123,
  name: `My Chain`,
  network: `my-chain`,
  nativeCurrency: { 
    name: 'Ether', 
    symbol: 'ETH', 
    decimals: 18
  },
  rpcUrls: {
    public: { 
      http: ['http://localhost:3000'] },
      default: { http: ['http://localhost:3000'] 
    },
  },
  // the following contract addresses have to be provided
  contracts: {
    rollupCreator: { address: '0x1000000000000000000000000000000000000000' },
    tokenBridgeCreator: { address: '0x2000000000000000000000000000000000000000' },
  },
})

Note that if you're using a custom parent chain, defaults for certain functions can't be provided, so you'll have to specify those values:

• createRollupPrepareDeploymentParamsConfig
  • params.confirmPeriodBlocks will be required
  • params.sequencerInboxMaxTimeVariation will be required
• createRollupPrepareTransactionRequest and createRollup
  • params.maxDataSize will be required
• prepareNodeConfig
  • parentChainIsArbitrum will be required

v0.19.0

What's Changed

• Fixed an issue with the setup-fast-withdrawal example, where the fast confirmer wasn't in the validator list (@TucksonDev in #171)
• Fixed an issue with createRollupPrepareTransaction, making it work with RollupCreator v1.1 (@spsjvc in #173)
• Added new getters and transaction request builders for SequencerInbox (@chrstph-dvx in #114, #117, #176, #178, #182)
  • New getters
    • getMaxTimeVariation
    • isBatchPoster
    • isValidKeysetHash
  • New transaction request builders
    • buildSetMaxTimeVariation
    • buildSetIsBatchPoster, buildEnableBatchPoster and buildDisableBatchPoster
    • buildSetValidKeyset and buildInvalidateKeysetHash

Full Changelog: v0.18.0...v0.19.0

v0.18.0

What's Changed

Breaking Changes

• Updated Rollup deployment utilities to use RollupCreator v2.1 (@spsjvc in #153)
  • Parameter batchPoster: Address is changed to batchPosters: Address[]
  • Parameter batchPosterManager is added as optional
    • Responsible for managing active batch posters, optional as these actions can also be taken by the owner

const txRequest = await createRollupPrepareTransactionRequest({
  params: {
    config,
    validators: [validator],
-   batchPoster,
+   batchPosters: [batchPoster],
+   batchPosterManager,
  },
  account,
  publicClient,
});

• Updated contract ABIs (@spsjvc in #160, #168)
  • Updated import paths so contracts are grouped by contract name and version
  • Updated the ABIs for Nitro contracts from v1.1 to v2.1, keeping v1.1 for backwards compatibility

- import { arbOwner, rollupAdminLogic, sequencerInbox } from '@arbitrum/orbit-sdk/contracts';
+ import { arbOwnerABI, arbOwnerAddress } from '@arbitrum/orbit-sdk/contracts/ArbOwner';
+ import { rollupABI } from '@arbitrum/orbit-sdk/contracts/Rollup';
+ import { sequencerInboxABI } from '@arbitrum/orbit-sdk/contracts/SequencerInbox';

// import latest version
import { rollupCreatorABI } from '@arbitrum/orbit-sdk/contracts/RollupCreator';
// import specific versions
import { rollupCreatorABI } from '@arbitrum/orbit-sdk/contracts/RollupCreator/v1.1';
import { rollupCreatorABI } from '@arbitrum/orbit-sdk/contracts/RollupCreator/v2.1';

• Removed createRollupPrepareConfig which was marked as deprecated since v0.15.0 (@spsjvc in #163)
  • It's replaced by createRollupPrepareDeploymentParamsConfig, keeping almost exactly the same API, other than requiring a PublicClient of the parent chain in order to provide better defaults

- const config = createRollupPrepareConfig({
+ const config = createRollupPrepareDeploymentParamsConfig(parentPublicClient, {
    chainId,
    owner,
    chainConfig,
  });

• Removed some configurable parameters in prepareChainConfig (@spsjvc in #169)
  • Parameters that should not be changed can no longer be changed
  • Parameters that can still be changed are:
    • chainId (required)
    • arbitrum.InitialChainOwner (required)
    • arbitrum.InitialArbOSVersion
    • arbitrum.DataAvailabilityCommittee
    • arbitrum.MaxCodeSize
    • arbitrum.MaxInitCodeSize

Other Changes

• Added AEP fee routing utilities with examples (@TucksonDev in #80)
  • Added feeRouterDeployChildToParentRouter and feeRouterDeployRewardDistributor functions for contract deployment
• Added utilities for dealing with Consensus releases and WASM module roots (@spsjvc in #155, #166, #167)
  • Added isKnownWasmModuleRoot to check if the provided value matches a known WASM module root
  • Added getConsensusReleaseByVersion and getConsensusReleaseByWasmModuleRoot for fetching Consensus releases
• Updated the default WASM module root to Consensus v31 (@spsjvc in #164)
• Updated Token Bridge Contracts refs to v1.2.2 (@spsjvc in #165)

Full Changelog: v0.17.2...v0.18.0

v0.17.2

What's Changed

• Fixed an overflow issue when converting BigNumber to BigInt (@spsjvc in #158)

Full Changelog: v0.17.1...v0.17.2