nixos/tests/vpp: init

nixos/tests/all-tests.nix

@@ -1137,6 +1137,7 @@ in {
   victoriametrics = handleTest ./victoriametrics {};
   vikunja = handleTest ./vikunja.nix {};
   virtualbox = handleTestOn ["x86_64-linux"] ./virtualbox.nix {};
+  vpp = handleTest ./vpp.nix {};
   vscode-remote-ssh = handleTestOn ["x86_64-linux"] ./vscode-remote-ssh.nix {};
   vscodium = discoverTests (import ./vscodium.nix);
   vsftpd = handleTest ./vsftpd.nix {};

nixos/tests/vpp.nix

@@ -0,0 +1,132 @@
+# This test runs FD.io's VPP and tests routing between two virtual networks.
+# Topology is similar to the `nat` test, with a client on one network, a server
+# on another, and a VPP-powered router inbetween connecting the two.
+
+import ./make-test-python.nix (
+  { pkgs, lib, ... }:
+  {
+    name = "vpp";
+
+    meta.maintainers = with lib.maintainers; [ romner-set ];
+
+    nodes = {
+      client =
+        { ... }:
+        {
+          virtualisation.vlans = [ 1 ];
+          networking.interfaces = lib.mkForce {
+            eth1.ipv6.addresses = [
+              {
+                address = "fd01::2";
+                prefixLength = 64;
+              }
+            ];
+          };
+          networking.defaultGateway6 = "fd01::1";
+          networking.useDHCP = false;
+        };
+      server =
+        { ... }:
+        {
+          virtualisation.vlans = [ 2 ];
+          networking.interfaces = lib.mkForce {
+            eth1.ipv6.addresses = [
+              {
+                address = "fd02::2";
+                prefixLength = 64;
+              }
+            ];
+          };
+          networking.defaultGateway6 = "fd02::1";
+          networking.useDHCP = false;
+
+          services.nginx.enable = true;
+          services.nginx.statusPage = true;
+
+          networking.firewall.allowedTCPPorts = [ 80 ];
+        };
+      router =
+        { config, ... }:
+        {
+          virtualisation.vlans = [
+            1
+            2
+          ];
+
+          # Disable netdevs so VPP can take over them
+          networking.useDHCP = false;
+          networking.interfaces = lib.mkForce { };
+
+          # install igb_uio driver
+          boot.extraModulePackages = [ config.boot.kernelPackages.dpdk-kmods ];
+
+          virtualisation.memorySize = 4096;
+          services.vpp.hugepages = {
+            autoSetup = true;
+            count = 1024;
+          };
+
+          services.vpp.instances.main = {
+            enable = true;
+            kernelModule = "igb_uio";
+            settings = {
+              unix.cli-listen = "/run/vpp/cli.sock"; # override a default value
+
+              plugins = {
+                # Selectively enable only necessary plugins
+                plugin.default.disable = true;
+                plugin."dpdk_plugin.so".enable = true;
+              };
+
+              dpdk.dev."0000:00:09.0".name = "vlan1";
+              dpdk.dev."0000:00:0a.0".name = "vlan2";
+            };
+            startupConfig = ''
+              set int state vlan1 up
+              set int state vlan2 up
+              set int ip addr vlan1 fd01::1/64
+              set int ip addr vlan2 fd02::1/64
+            '';
+          };
+        };
+    };
+
+    testScript = ''
+      start_all()
+
+      # wait for router
+      router.wait_for_unit("vpp-main.service")
+      router.wait_for_file("/run/vpp/cli.sock")
+
+      # make sure VPP initialized correctly
+      # the sleep is necessary since startupConfig executes *after* the service starts
+      router.sleep(2)
+      router.succeed("vppctl show int addr | grep -A1 vlan1 | grep -q fd01::1/64")
+      router.succeed("vppctl show int addr | grep -A1 vlan2 | grep -q fd02::1/64")
+
+      # wait for server, make sure nginx is reachable
+      server.wait_for_unit("nginx.service")
+      server.succeed("curl --fail http://[::1]")
+
+      # wait for client, make sure it can connect to the server through the router
+      client.wait_for_unit("network.target")
+      client.succeed("curl --fail http://[fd02::2]")
+
+      # test ICMP
+      server.succeed("ping -c 1 fd01::2")
+      client.succeed("ping -c 1 fd02::2")
+
+      # disable interfaces in VPP, make sure server isn't reachable
+      router.succeed("vppctl set int state vlan1 down")
+      router.succeed("vppctl set int state vlan2 down")
+      client.fail("curl --fail --connect-timeout 5 http://[fd02::2]")
+      client.fail("ping -c 1 fd02::2")
+
+      # restart VPP, make sure it restores its config & server becomes reachable again
+      router.succeed("systemctl restart vpp-main")
+      router.wait_for_unit("vpp-main.service")
+      client.succeed("curl --fail http://[fd02::2]")
+      client.succeed("ping -c 1 fd02::2")
+    '';
+  }
+)

pkgs/by-name/vp/vpp/package.nix

@@ -3,6 +3,7 @@
   stdenv,
   fetchFromGitHub,
   nix-update-script,
+  nixosTests,
   cmake,
   pkg-config,
   check,
@@ -118,6 +119,10 @@ stdenv.mkDerivation rec {
 
   passthru.updateScript = nix-update-script { };
 
+  passthru.tests = {
+    inherit (nixosTests) vpp;
+  };
+
   meta = {
     description = "Fast, scalable layer 2-4 multi-platform network stack running in user space";
     homepage = "https://s3-docs.fd.io/vpp/${version}/";