Print Guide

Electronics_Bay

Completely skip official electronics_bay folder.

Print our printed parts name started with Elec

You totally need these:

2pcs Elec_Din_Clip_x2.stl

4pcs Elec_LRS_200_Mount_x4.STL

1pcs Elec_M8P_Mount.STL

Exhaust Filter

We use nevermore in out kit, so you can completely skip official exhaust filter folder.

Print these parts to seal the back panel:

1pcs Exhaust_cover.stl

1pcs Exhaust_filter_grill.stl

This mod comes from Fictio's Exhaust_cover

Gantry

Skip these parts:

STLs/Gantry/AB_Drive_Units/[a]_cable_cover.stl

STLs/Gantry/X_Axis/XY_Joints/[a]_endstop_pod_D2F_switch.stl

STLs/Gantry/X_Axis/XY_Joints/[a]_endstop_pod_hall_effect.stl

STLs/Gantry/X_Axis/XY_Joints/[a]_endstop_pod_hall_effect.stl

STLs/Gantry/X_Axis/XY_Joints/[a]_xy_joint_cable_bridge_2hole.stl

STLs/Gantry/X_Axis/XY_Joints/[a]_xy_joint_cable_bridge_3hole.stl

STLs/Gantry/X_Axis/X_Carriage/*

STLs/Gantry/X_Axis/Z_Joints/z_joint_upper_hall_effect.stl

Panel_Mounting

Use deck_support_3mm_x8.stl and skip the 4mm one.

If you are using Disco Stick:

Skip Z_belt_Cover and use our Panel_Z_Belt Cover:

Panel_Z_belt_cover_A.stl

Panel_Z_belt_cover_B.stl

Panel_Z_belt_cover_Route_A.stl

Panel_Z_belt_cover_Route_B.stl

The route Z Belt Cover comes from tanaes's whopping_Voron_mods

Skirts

Use power_inlet_IECGS_1.2mm.stl and skip other power_inlet_*

Z Endstop

Skip this folder, we use VORON Tap as z endstop.

VORON Tap

Print these parts and follow offical tap guide.

https://github.com/VoronDesign/Voron-Tap/tree/main/STLs

Print Tap_Upper_PCB_r2.stl and skip other Tap_Upper_*

Stealthburner

Skip X_Carriage folder

Skip Clockwork2/cable_door.stl and print cable_door_for_pcb.stl

Skip Clockwork2/chain_*

Print these from our github:

Print Toolhead_Cable_Bridge.STL

Print Toolhead_Can_Cable_Fix.stl

Disco Strick

Print 2pcs LED_2020_x2.stl

This mod comes from Daylight