psi46test README

NOTE: Do not forget to read the Changelog.txt file as well for latest changes to the code.

Prerequisites:

The FTDI D2XX drivers for USB are needed. If not yet installed, download them from

http://www.ftdichip.com/Drivers/D2XX.htm

and follow the instructions in the ReadMe file there. You only need to install the shared library. No need for the examples.

rpc header file:

You need the header file for the rpc calls. You can either take it from a working installation of pXar or make your own. To do this, install a working copy of rpcgen. For this, do

git clone [email protected]:psi46/tools.git psi46tools
cd psi46tools
make

Copy the file pixel_dtb.h from your copy of psi46test into this directory. Then issue

     ./rpcgen ../pixel_dtb.h -hrpc_calls.cpp

which gives you the file rpc_calls.cpp. Copy this back into your psi46test source area.

Installation:

Linux/Darwin (Mac OS X):

1. Compile the software by typing

   make

2. If your environment variable PATH contains /usr/local/bin, skip to the next step. You can find out if you type

   echo $PATH

   If the path is not in the variable then edit your ~/.bashrc file and append

   export PATH=$PATH:/usr/local/bin

   Newly opened shells will then have the PATH environment variable set correctly.

3. If your environment variable LD_LIBRARY_PATH contains /usr/local/lib, skip to the next step. You can find out by typing

`echo $LD_LIBRARY_PATH`

 If the path is missing, edit your ~/.bashrc file and append

`export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:/usr/local/lib`

 Newly opened shells will then have the LD_LIBRARY_PATH environment
 variable set correctly.

4. (Skip on a Mac) If you want regular users to use the software you must grant them permission to the USB devices. You can do this by adding the file /etc/udev/rules.d/10-testboard.rules (needs sudo) or edit it, if the file already exists. Add the line

`SUBSYSTEM == "usb", ATTR{manufacturer}=="PSI", GROUP="usb", MODE="0664"`

 and it should work now.

5. If you get an error that your USB device is busy, then your Linux box has a generic serial driver for the FTDI chip already installed. To prevent the driver ftdi_sio from taking ownership of the testboard check first if this is really the case. Disconnect and reconnect the testboard. Then issue

`dmesg | tail -20`

 If you see that the driver ftdi_sio gets loaded and a serial usb 
 interface has been established for your testboard, then you lost.
 Fix it as follows:

 Add a line with "blacklist ftdi_sio" to /etc/modprobe.d/blacklist.conf
 (needs sudo) and issue the command sudo update-initramfs -u. After a 
 reboot test it again. If the serial USB connection is no longer 
 established you should be able to talk to the board.

 This comes at a disadvantage: Every other USB device using that chip
 may stop to work. So be careful. If you have a better solution report
 this or even better update this README.

6. Run

`bin/psi46test <logfilename>`

 <logfilename> is just a name of your choice for the logfile that 
 psi64test is going to write to. It is recreated every time anew, i.e.
 it overwrites any old one with the same name.

Common issues

• Some Ubuntu installations miss header. When you call make the compiler will complain. You can install them with

  sudo apt-get install libreadline-dev libx11-dev

• Some Ubuntu installations show take over of the device by ehci_hcd. Blacklisting doesn't help. Currently we are stuck. If anybody found a solution, please let us know and update this file.

• On Ubuntu 12.04 at least one user report says that you will need to add

  -ltermcap

  to the variable LDFLAGS in the Makefile (in the Linux case, not Darwin).

• If you are on Mac OS 10.8: You must install X11 (http://support.apple.com/kb/HT5293) and create a symbolic link

  ln -s /opt/X11/include/X11 /usr/local/include/X11

• If you are on Mac OS 10.7 (or lower): make sure you have the most recent version of Xcode and gcc installed. See

  http://woss.name/2012/01/24/how-to-install-a-working-set-of-compilers-on-mac-os-x-10-7-lion/

  for instructions.

• If you are on Max OS 10.6: If you managed to make it work, let us know. We did not.

• Some older compilers complain about -Wno-logical-op-parentheses in the invocation of the C++ compiler. Just remove this in the Makefile and it should work.