Welcome to the Bambulab Studio / Orca Slicer Presets repository! This repository is dedicated to storing / collecting presets that have been meticulously crafted and optimized for use in 3D printing and slicing applications. Whether you're a 3D printing enthusiast, engineer, or designer, our collection of presets aims to simplify your workflow and elevate your 3D printing experience.
- A growing collection of presets for Bambulab Studio / Orca Slicer based 3D slicer applications.
- Presets are meticulously optimized for quality and print performance.
- Regular updates and additions to the preset library.
- Community-driven contributions and improvements.
- Explore the Presets: Browse through the preset categories (Machine, Filament and Process) and select the ones that match your 3D printing needs.
- Optimize Your Prints: Use the presets to optimize your 3D printing settings for superior print quality and efficiency.
- Import Presets: Import the chosen presets into your 3D slicer software by downloading the repository and dropping them into the folder respective preset folders. Full Path:
C:\Users\USER\AppData\Roaming\OrcaSlicer\user\default
Relative Path:
%AppData%\Roaming\BambuStudio\user\[NUMBER]\filament
For the best results, please follow these instructions step by step.
- Begin with the "Flow Dynamics Calibration" steps provided in this official guide https://wiki.bambulab.com/en/software/bambu-studio/calibration_pa
- Use the auto calibration mode first, if that one does not successfully finish, please skip to step 4.
- Continue on with auto calibration mode for "Flow Rate Calibration" https://wiki.bambulab.com/en/software/bambu-studio/calibration_flow_rate
- Now to create preset as optimized as possible again run a manual check with Manual mode in Flow Dynamics Calibration
- So do the same manual calibration for the "Flow Rate Calibration".
- NOTE: Make sure when ever you got a calibration done, that you select the profile before continuing the next calibration, as selecting a default profile will not result in the best combined settings for both calibration methods.
For the best results, please follow these instructions step by step.
- Begin with the "Flow Rate Calibration" steps provided in this official guide: https://github.com/SoftFever/OrcaSlicer/wiki/Calibration#flow-rate
- Also, the line method is highly recommended to fine tune the Pressure Advance: https://github.com/SoftFever/OrcaSlicer/wiki/Calibration#pressure-advance
- For refined overhangs or bridging, the "Temperature Tower" just finds the perfect spot for the Hotend. Please run this with the recommended temperature range of the manufacturer. https://github.com/SoftFever/OrcaSlicer/wiki/Calibration#Temp-tower
- (optional) To get the "Maximum Volumetric Speed" for each filament, you can run through the steps at https://github.com/SoftFever/OrcaSlicer/wiki/Calibration#max-volumetric-speed and determining the "Maximum Volumetric Speed". This would help limit the max speed / volumetric extrusion for the filament.
- ...