Skip to content

Neptune 1.06s

Latest
Latest
Compare
Choose a tag to compare
@dvitas dvitas released this 11 Mar 09:57
neptune-1.06s
a7598e7

This is the latest Neptune firmware image, as of 2014-03-11.
Full changelog follows:

neptune-1.06s:

  • Fix LCD display of hashing rate when using BFGMiner.

neptune-1.06:

  • Included BFGMiner (ver. 5.0.0);
  • CGMiner updated to v4.9.1;
  • Eliminated another possible source of spurious CGMiner/BFGMiner restarts
    (monitordcdc: Send "restart die" requests to miner only if die is not OFF)

neptune-1.05:

  • cgminer core updated to 4.9.0;
  • cgminer Neptune driver updates:
    • memory leak fixed;
    • some logging issues fixed;
  • knc-asic is updated to v2.5, which includes FPGA update to 5.02;
  • with knc-asic v2.5 also comes updated waas with support for "OFF" state for dies,
    so added support for OFF dies.

neptune-1.02:

  • Correctly create and apply default advanced settings on
    reset to factory defaults by power button
  • cgminer v4.4.1-knc3.6: Add API call knc-configure-die for dynamically
    add/remove dies
  • Fix problem: cgminer restarts frequently

neptune-1.00:

  • cgminer v4.4.1-knc3.5: Major rework of cgminer KnC driver:
    CPU performance improvement and better error handling
    This also fixes errors while viewing advanced settings page.
  • Update asic_cmd to v1.6
  • Print out board temperature, average DC/DC temp and clock rate on Status page
    for each ASIC board.
  • Remove checkbox "BFGMiner"
  • Detect enabled asics dynamically; do not use stats.knc file for that.
    Get rid of stats.knc file completely
  • There might be ASIC board plugged into slot 0
    (LCD screen does not prevent this)

neptune-rc9:

  • minor change in cgminer: cleanup statistics a bit
  • Make sure that after factory reset advanced.conf is recreated with default values
  • Fix bug: static IP can not be set from web interface
  • Update asic_cmd to v1.3

neptune-rc8:

  • Minor fixes in cgminer:
    -- Change priority of some log messages
    -- Missing closing zero in api string
  • Do not run monitordcdc if there is no cgminer.conf
  • Stop all dcdc before reboot
  • Improvements in waas and monitordcdc regarding power-cycling ASIC boards
  • Detect hardware configuration changes during runtime
    Useful when power-cycling ASIC boards
  • Button "Factory Defaults" on the Advanced page now works without producing garbage in response

neptune-rc6:
Initial public release; shipped with first few Neptune miners.

Assets 3
Loading