Add Genesis benchmark scripts

scripts/genesis-benchmarks/README.md

@@ -0,0 +1,99 @@
+In these notes we describe how to benchmark and profile genesis with a
+`cardano-node` downloading blocks from mainnet. We wrote three scripts to
+help with this task:
+
+* provision.sh
+    * installs nix, clones repositories, and configures a cabal project to
+      use these repositories.
+    * Downloads a db-mainnet snapshot to save setup time.
+    * Installs system dependencies via nix and builds the cardano-node and
+      the immdb-server.
+* run-server-node.sh:
+  Runs the immdb-server and launches toxiproxy so the server is reachable
+  through multiple addresses that can be supplied as different peers for the
+  syncing node to connect to. The amount of addresses is taken as an input
+  parameter to the script.
+* run-syncing-node.sh
+    * Resets the state of the chain db so synchronization starts at a
+      designated slot in the past.
+    * Runs the syncing node until the tip of the volatile db reaches or is
+      newer than a designated slot.
+    * At the end prints how long it took to run the syncing node and the memory
+      usage report from the GHC runtime produced with +RTS -s
+
+provision.sh must run first to install system dependencies and tooling. Then
+the server and its proxies can be started with run-server-node.sh. And finally
+run-syncing-node.hs can be started in another terminal.
+
+All three scripts build Haskell libraries and binaries in the normal way, but
+with a profiling-enabled GHC. This makes it easy to reuse the setup to build
+with profiling enabled.
+
+We have used the scripts successfully in a t3.2xlarge machine in aws with 400
+GB of storage and ubuntu installed.
+
+### How to start the server
+
+The following command runs the server and configures 30 proxy addresses to
+connect to it.
+```
+$ ./run-server-node.sh 30
+```
+
+### How to sync with genesis disabled
+
+The following command runs the syncing node which will connect to a single peer
+and synchronize using Praos.
+```
+$ ./run-syncing-node.sh 1
+```
+
+The following command will connect to 30 peers and will synchronize using Praos.
+```
+$ ./run-syncing-node.sh 30
+```
+
+### How to sync with genesis enabled
+
+The following command runs the syncing node which will connect to two peers and
+synchronize using Genesis. Genesis can also synchronize with only 1 peer, but
+it is slower because the implementation is not optimized for that case.
+```
+$ ENABLE_GENESIS=1 ./run-syncing-node.sh 2
+```
+
+Using 30 peers should produce little overhead when compared to only 2 peers.
+```
+$ ENABLE_GENESIS=1 ./run-syncing-node.sh 30
+```
+
+### How to tweak the range of slots to sync
+
+By default, the script will synchronize 50000 slots starting at slot 100007913.
+To synchronize 155000 slots instead, the environment variable `NUM_SLOTS` can
+be used.
+```
+$ NUM_SLOTS=155000 ENABLE_GENESIS=1 ./run-syncing-node.sh 30
+```
+
+The initial slot of the range is harder to change because the startup of the
+node is optimized with a snapshot of the ledger at slot 100007913. Generating a
+snapshot for a different slot would make it possible to start the range from
+it.
+
+### How to collect the eventlog of the syncing node
+
+The following command collects the eventlog.
+```
+$ CARDANO_NODE_RTS_FLAGS=-ls ENABLE_GENESIS=1 ./run-syncing-node.sh 30
+```
+
+This produces a file `cardano-node/cardano-node.eventlog` that can be fed to
+`ghc-events-analyze` to observe the CPU consumption per thread.
+
+### How to produce tracing with full detail
+
+The following command enables tracing with full detail.
+```
+$ ENABLE_FULL_TRACING=1 ENABLE_GENESIS=1 ./run-syncing-node.sh 30
+```

scripts/genesis-benchmarks/provision.sh

@@ -0,0 +1,79 @@
+#!/usr/bin/env bash
+set -eux
+
+# Downloads db-mainnet
+# Truncates db-mainnet
+# Builds a snapshot of the ledged (takes near 12 hours)
+# Builds immdb-server and cardano-node from amesgen/csj branch
+# Dowloads toxiproxy
+
+echo colorscheme desert > .vimrc
+
+sh <(curl -L https://nixos.org/nix/install) --daemon --yes
+
+source /etc/bashrc
+
+mkdir -p .config/nix
+echo experimental-features = nix-command flakes > .config/nix/nix.conf
+mkdir -p .local/share/nix
+echo '{"extra-substituters":{"https://cache.iog.io":true},"extra-trusted-public-keys":{"hydra.iohk.io:f/Ea+s+dFdN+3Y/G+FDgSq+a5NEWhJGzdjvKNGv0/EQ=":true}}' > .local/share/nix/trusted-settings.json
+
+sudo bash -c "echo extra-trusted-users = $USER >> /etc/nix/nix.conf"
+sudo systemctl restart nix-daemon.service
+
+git clone https://github.com/IntersectMBO/cardano-node -b genesis/benchmarks-rebased
+
+git clone https://github.com/IntersectMBO/ouroboros-consensus -b genesis/benchmarks-rebased
+
+git clone https://github.com/IntersectMBO/ouroboros-network -b blockfetch/milestone-1-rebased
+
+cat << EOF > cardano-node/cabal.project.local
+packages:
+  ../ouroboros-network/ouroboros-network
+  ../ouroboros-network/ouroboros-network-api
+  ../ouroboros-network/ouroboros-network-protocols
+  ../ouroboros-consensus/ouroboros-consensus
+  ../ouroboros-consensus/ouroboros-consensus-cardano
+  ../ouroboros-consensus/ouroboros-consensus-diffusion
+  ../ouroboros-consensus/ouroboros-consensus-protocol
+  ../ouroboros-consensus/sop-extras
+  ../ouroboros-consensus/strict-sop-core
+
+program-options
+  ghc-options: -Wwarn
+EOF
+
+(cd cardano-node; nix develop .#project.x86_64-linux.projectVariants.ghc96.profiled.shell -c bash -c "cabal update; cabal build cardano-node:exe:cardano-node ouroboros-consensus-cardano:exe:immdb-server ouroboros-consensus-cardano:exe:db-analyser")
+
+wget -c https://update-cardano-mainnet.iohk.io/cardano-node-state/db-mainnet.tar.gz -O - | tar -xz
+
+# wget -c http://dl.amesgen.de/tmp/100007913_db-analyser.zst -O - | unzstd > 100007913_db-analyser
+
+# Make a copy of the chain db for the syncing node
+
+NODE_DB=db-mainnet-truncated
+cp -r db-mainnet $NODE_DB
+
+# build a snapshot of the ledger at a recent slot
+
+build_ledger_snapshot() {
+  local NODE_DIR=$PWD/server-node
+  local CONFIG_YAML=$NODE_DIR/mainnet-config.yaml
+  local CONFIG_JSON=$NODE_DIR/config.json
+  mkdir -p $NODE_DIR
+  cp cardano-node/configuration/cardano/mainnet-config.yaml $CONFIG_YAML
+  # sed -i 's/EnableP2P: true/EnableP2P: false/g' $CONFIG_YAML
+  cp cardano-node/configuration/cardano/*.json $NODE_DIR
+  nix-shell -p yaml2json --run "yaml2json < $CONFIG_YAML > $CONFIG_JSON"
+
+  (cd cardano-node; nix develop .#project.x86_64-linux.projectVariants.ghc96.profiled.shell -c bash -c "cabal exec db-analyser -- --store-ledger 100007913 --db ../db-mainnet cardano --config $CONFIG_JSON")
+  mv db-mainnet/ledger/100007913_db-analyser 100007913_db-analyser
+}
+
+# call build_ledger_snapshot or alternatively download it from friends :)
+wget -c https://ramify.amesgen.de/100007913_db-analyser.zst -O - | unzstd > 100007913_db-analyser
+
+# downloading toxiproxy
+wget https://github.com/Shopify/toxiproxy/releases/download/v2.9.0/toxiproxy-server-linux-amd64
+wget https://github.com/Shopify/toxiproxy/releases/download/v2.9.0/toxiproxy-cli-linux-amd64
+chmod +x toxiproxy-cli-linux-amd64 toxiproxy-server-linux-amd64

scripts/genesis-benchmarks/run-server-node.sh

@@ -0,0 +1,46 @@
+#!/usr/bin/env bash
+set -eux
+
+# run-server-node.sh <N>
+#
+# Runs the server node and <N> toxiproxies on ports 23000, 23001, etc
+#
+
+N=$1
+NODE_DIR=$PWD/server-node
+NODE_DB=$PWD/db-mainnet
+
+CONFIG_YAML=$NODE_DIR/mainnet-config.yaml
+CONFIG_JSON=$NODE_DIR/config.json
+
+mkdir -p $NODE_DIR
+cp cardano-node/configuration/cardano/*.json $NODE_DIR
+cp cardano-node/configuration/cardano/mainnet-config.yaml $CONFIG_YAML
+echo ConwayGenesisFile: shelley_qa-conway-genesis.json >> $CONFIG_YAML
+nix-shell -p yaml2json --run "yaml2json < $CONFIG_YAML > $CONFIG_JSON"
+
+# Running the server node
+
+generate_toxiproxy_config_json() {
+  local OUTPUT=$1
+  local CONFIG_ARR=("{\"name\": \"genesis_proxy 0\",\"upstream\":\"127.0.0.1:3001\",\"listen\":\"127.0.0.1:23000\",\"enabled\":true}")
+  for((i=1;i<$N;i++))
+  do
+    CONFIG_ARR+=(",{\"name\": \"genesis_proxy $i\",\"upstream\":\"127.0.0.1:3001\",\"listen\":\"127.0.0.1:$((i+23000))\",\"enabled\":true}")
+  done
+  echo '[' ${CONFIG_ARR[*]} ']' > $OUTPUT
+}
+
+TOXIPROXY_CONFIG=$NODE_DIR/toxiproxy_conf.json
+generate_toxiproxy_config_json $TOXIPROXY_CONFIG
+./toxiproxy-server-linux-amd64 -config $TOXIPROXY_CONFIG &
+
+trap 'kill $(jobs -p)' EXIT
+
+CABAL_FLAGS=${CABAL_FLAGS:-}
+
+(cd cardano-node; nix develop .#project.x86_64-linux.projectVariants.ghc96.profiled.shell -c bash -c "cabal build $CABAL_FLAGS ouroboros-consensus-cardano:exe:immdb-server && echo running immdb-server && cabal run $CABAL_FLAGS ouroboros-consensus-cardano:exe:immdb-server -- \
+  --db $NODE_DB/immutable/ \
+  --config $CONFIG_JSON \
+  --port 3001" \
+)

scripts/genesis-benchmarks/run-syncing-node.sh

@@ -0,0 +1,98 @@
+#!/usr/bin/env bash
+set -eux
+
+# NUM_SLOTS=1000000 run-syncing-node.sh <N>
+#
+# Runs the syncing node with a topology with <N> peers on ports 23000, 23001, etc
+#
+# NUM_SLOTS tells how many slots to sync up. The default value is 50000.
+#
+
+N=$1
+NODE_DIR=$PWD/syncing-node
+NODE_DB=$PWD/db-mainnet-truncated
+mkdir -p $NODE_DIR/logs
+
+CONFIG_YAML=$NODE_DIR/mainnet-config.yaml
+cp cardano-node/configuration/cardano/mainnet-config.yaml $CONFIG_YAML
+cp cardano-node/configuration/cardano/*.json $NODE_DIR
+echo TraceOptionPeerFrequency: 5000 >> $CONFIG_YAML
+echo ConwayGenesisFile: shelley_qa-conway-genesis.json >> $CONFIG_YAML
+sed -i 's/PeerSharing: .*//g' $CONFIG_YAML
+if [ -v ENABLE_GENESIS ]
+then
+   echo EnableGenesis: true >> $CONFIG_YAML
+fi
+if [ -v ENABLE_FULL_TRACING ]
+then
+cat <<END >> $CONFIG_YAML
+UseTraceDispatcher: True
+
+TraceOptions:
+  "":
+    severity: Debug
+    detail: DNormal
+    backends:
+      - Stdout MachineFormat
+
+TraceOptionPeerFrequency: 5000
+END
+fi
+TOPOLOGY_JSON=$NODE_DIR/topology.json
+
+truncate_chaindb() {
+  echo truncating chain db ...
+  rm -rf $NODE_DB/volatile
+
+  mkdir -p $NODE_DB/ledger
+  rm -rf $NODE_DB/ledger/*
+  cp 100007913_db-analyser $NODE_DB/ledger/100007913
+
+  set +x
+  for i in $(seq -f "%05g" 4630 99999); do
+      if [ ! -f $NODE_DB/immutable/"$i.chunk" ]; then
+          break
+      fi
+      for t in primary secondary chunk; do
+          rm -f $NODE_DB/immutable/"$i.$t"
+      done
+  done
+  set -x
+}
+
+generate_topology_json_p2p() {
+  local OUTPUT=$1
+  local TOPOLOGY_ARR=("{\"address\": \"127.0.0.1\", \"port\": 23000}")
+  for((i=1;i<$N;i++))
+  do
+    TOPOLOGY_ARR+=(", {\"address\": \"127.0.0.1\", \"port\": $((i+23000))}")
+  done
+  echo '{"publicRoots": [], "localRoots": [ { "accessPoints": [' ${TOPOLOGY_ARR[*]}'], "advertise": false, "hotValency": ' $N', "trustable": true}]}' > $OUTPUT
+}
+
+generate_topology_json_legacy() {
+  local OUTPUT=$1
+  local TOPOLOGY_ARR=("{\"addr\":\"127.0.0.1\",\"port\":23000,\"valency\":1}")
+  for((i=1;i<$N;i++))
+  do
+    TOPOLOGY_ARR+=(",{\"addr\":\"127.0.0.1\",\"port\":$((i+23000)),\"valency\":1}")
+  done
+  echo '{"localRoots": [], "publicRoots": [], "Producers": [' ${TOPOLOGY_ARR[*]} ']}' > $OUTPUT
+}
+
+truncate_chaindb
+generate_topology_json_p2p $TOPOLOGY_JSON
+
+CABAL_FLAGS=${CABAL_FLAGS:-}
+
+(cd cardano-node; nix develop .#project.x86_64-linux.projectVariants.ghc96.profiled.shell -c bash -c "cabal build $CABAL_FLAGS cardano-node:exe:cardano-node && time cabal run $CABAL_FLAGS cardano-node:exe:cardano-node -- \
+    run \
+    --config $CONFIG_YAML \
+    --database-path $NODE_DB \
+    --topology $TOPOLOGY_JSON \
+    --host-addr 0.0.0.0 --port 3002 \
+    --socket-path $NODE_DIR/node.socket \
+    --shutdown-on-slot-synced $((100007913 + ${NUM_SLOTS:-50000})) \
+    +RTS -s ${CARDANO_NODE_RTS_FLAGS:-} \
+   | tee $NODE_DIR/logs/sync-$(date -Iseconds).json" \
+)