docs: fix docs of vpc_v1

docs/data-sources/vpc_peering_connection_v2.md

@@ -39,6 +39,9 @@ The given filters must match exactly one VPC peering connection whose data will
 
 * `name` (Optional) - The name of the specific VPC Peering Connection to retrieve.
 
+* `region` - (Optional) The region in which to obtain the V1 VPC client. A VPC client is needed to retrieve VPCs.
+  If omitted, the region argument of the provider is used.
+
 ## Attributes Reference
 
 All of the argument attributes are exported as result attributes.

docs/data-sources/vpc_route_ids_v2.md

@@ -33,6 +33,9 @@ output "route_nexthop" {
 
 * `vpc_id` (Required) - The VPC ID that you want to filter from.
 
+* `region` - (Optional) The region in which to obtain the V1 VPC client. A VPC client is needed to retrieve VPCs.
+  If omitted, the region argument of the provider is used.
+
 ## Attributes Reference
 
 * `ids` - A list of all the route ids found. This data source will fail if none are found.

docs/data-sources/vpc_route_v2.md

@@ -42,6 +42,12 @@ route whose data will be exported as attributes.
 
 * `type` (Optional) - Route type for filtering.
 
+* `nexthop` (Optional) - Specifies the next hop. If the route type is peering, enter the VPC peering connection ID.
+  Changing this creates a new Route.
+
+* `region` - (Optional) The region in which to obtain the V1 VPC client. A VPC client is needed to retrieve VPCs.
+  If omitted, the region argument of the provider is used.
+
 ## Attribute Reference
 
 All of the argument attributes are also exported as

docs/data-sources/vpc_subnet_ids_v1.md

@@ -33,6 +33,9 @@ The following arguments are supported:
 
 * `vpc_id` (Required) - Specifies the VPC ID used as the query filter.
 
+* `region` - (Optional) The region in which to obtain the V1 VPC client. A VPC client is needed to retrieve VPCs.
+  If omitted, the region argument of the provider is used.
+
 ## Attributes Reference
 
 The following attributes are exported:

docs/data-sources/vpc_subnet_v1.md

@@ -42,6 +42,9 @@ subnet whose data will be exported as attributes.
 
 * `primary_dns` (Optional) - The IP address of DNS server 1 on the specific subnet.
 
+* `region` - (Optional) The region in which to obtain the V1 VPC client. A VPC client is needed to retrieve VPCs.
+  If omitted, the region argument of the provider is used.
+
 * `secondary_dns` (Optional) - The IP address of DNS server 2 on the specific subnet.
 
 * `availability_zone` (Optional) - The availability zone (AZ) to which the subnet should belong.

docs/data-sources/vpc_v1.md

@@ -57,3 +57,7 @@ The following attributes are exported:
 * `shared` - Specifies whether the cross-tenant sharing is supported.
 
 * `region` - See Argument Reference above.
+
+* `routes.destination` - Specifies the destination network segment of a routex.
+
+* `routes.nexthop` - Specifies the next hop of a route.

docs/data-sources/vpcep_endpoints.md

@@ -29,7 +29,7 @@ data "flexibleengine_vpcep_endpoints" "dns_endpoints" {
 ## Attributes Reference
 
 In addition to all arguments above, the following attributes are exported:
-
+``
 * `id` - Specifies a data source ID in UUID format.
 
 * `endpoints` - Indicates the public VPC endpoints information. Structure is documented below.
@@ -50,6 +50,8 @@ The `endpoints` block contains:
 * `whitelist` - List of IP or CIDR block which can access the VPC endpoint.
 * `private_domain_name` - DNS name pointing to the VPC endpoint ip.
 * `tags` - The key/value pairs to associate with the VPC endpoint.
+* `tags.key` - Specifies the tag key. Each tag key contains a maximum of 127 unicode characters but cannot be left blank.
+* `tags.value` - Specifies the tag value list. Each value contains a maximum of 255 Unicode characters. Before using values, delete SBC spaces before and after the value.
 * `project_id` - The ID of the project holding the VPC endpoint.
 * `created_at` - Creation date of the VPC endpoint.
 * `updated_at` - Last update date of the VPC endpoint.

docs/data-sources/vpcep_public_services.md

@@ -24,14 +24,14 @@ data "flexibleengine_vpcep_public_services" "dns_service" {
 
 * `service_id` - (Optional, String) Specifies the unique ID of the public VPC endpoint service.
 
+* `region` - The region in which to obtain the public VPC endpoint services.
+
 ## Attributes Reference
 
 In addition to all arguments above, the following attributes are exported:
 
 * `id` - Specifies a data source ID in UUID format.
 
-* `region` - The region in which to obtain the public VPC endpoint services.
-
 * `services` - Indicates the public VPC endpoint services information. Structure is documented below.
 
 The `services` block contains:

docs/resources/vpc_flow_log_v1.md

@@ -69,10 +69,17 @@ In addition to all arguments above, the following attributes are exported:
 
 * `status` - The status of the flow log. The value can be `ACTIVE`, `DOWN` or `ERROR`.
 
+## Timeouts
+
+This resource provides the following timeouts configuration options:
+
+* `create` - Default is 10 minute.
+* `delete` - Default is 10 minute.
+
 ## Import
 
 VPC flow logs can be imported using the `id`, e.g.
 
 ```sh
 terraform import flexibleengine_vpc_flow_log_v1.flowlog1 41b9d73f-eb1c-4795-a100-59a99b062513
-```
+```

docs/resources/vpc_peering_connection_accepter_v2.md

@@ -77,6 +77,9 @@ The following arguments are supported:
 
 * `accept` (Optional)- Whether or not to accept the peering request. Defaults to `false`.
 
+* `region` - (Optional, String, ForceNew) Specifies the region in which to create the vpc subnet. If omitted, the
+  provider-level region will be used. Changing this creates a new subnet.
+
 ## Removing flexibleengine_vpc_peering_connection_accepter_v2 from your configuration
 
 FlexibleEngine allows a cross-tenant VPC Peering Connection to be deleted from either the requester's or accepter's side.
@@ -102,6 +105,13 @@ All of the argument attributes except accept are also exported as result attribu
 
 * `peer_tenant_id` - The Tenant Id of the accepter tenant.
 
+## Timeouts
+
+This resource provides the following timeouts configuration options:
+
+* `create` - Default is 10 minute.
+* `delete` - Default is 10 minute.
+
 ## Import
 
 VPC Peering Connection Accepter can be imported using the VPC Peering Connection ID `vpc_peering_connection_id`, e.g.

docs/resources/vpc_peering_connection_v2.md

@@ -43,6 +43,9 @@ The following arguments are supported:
 * `peer_vpc_id` (Required) - Specifies the VPC ID of the accepter tenant. Changing this creates a new VPC peering connection.
 
 * `peer_tenant_id` (Optional) - Specified the Tenant Id of the accepter tenant. Changing this creates a new VPC peering connection.
+
+* `region` - (Optional, String, ForceNew) Specifies the region in which to create the vpc subnet. If omitted, the
+  provider-level region will be used. Changing this creates a new subnet.
 
 ## Attributes Reference
 
@@ -53,6 +56,13 @@ result attributes:
 
 * `status` - The VPC peering connection status. The value can be PENDING_ACCEPTANCE, REJECTED, EXPIRED, DELETED, or ACTIVE.
 
+## Timeouts
+
+This resource provides the following timeouts configuration options:
+
+* `create` - Default is 10 minute.
+* `delete` - Default is 10 minute.
+
 ## Import
 
 VPC Peering resources can be imported using the `vpc peering id`, e.g.

docs/resources/vpc_route_v2.md

@@ -25,6 +25,9 @@ resource "flexibleengine_vpc_route_v2" "vpc_route" {
 
 The following arguments are supported:
 
+* `region` - (Optional, String, ForceNew) The region in which to create the vpc route table.
+  If omitted, the provider-level region will be used. Changing this creates a new resource.
+
 * `destination` (Required) - Specifies the destination IP address or CIDR block. Changing this creates a new Route.
 
 * `nexthop` (Required) - Specifies the next hop. If the route type is peering, enter the VPC peering connection ID.
@@ -44,3 +47,10 @@ All of the argument attributes are also exported as
 result attributes:
 
 * `id` - The route ID.
+
+## Timeouts
+
+This resource provides the following timeouts configuration options:
+
+* `create` - Default is 10 minute.
+* `delete` - Default is 10 minute.

docs/resources/vpc_subnet_v1.md

@@ -75,6 +75,9 @@ The following arguments are supported:
 
 * `tags` - (Optional, Map) The key/value pairs to associate with the subnet.
 
+* `description` (Optional, String) - Provides supplementary information about the subnet.
+  The value can contain no more than 255 characters and cannot contain angle brackets (< or >).
+
 ## Attributes Reference
 
 In addition to all arguments above, the following attributes are exported:
@@ -91,6 +94,13 @@ In addition to all arguments above, the following attributes are exported:
 
 * `ipv6_gateway` - The IPv6 subnet gateway.
 
+## Timeouts
+
+This resource provides the following timeouts configuration options:
+
+* `create` - Default is 5 minute.
+* `delete` - Default is 5 minute.
+
 ## Import
 
 Subnets can be imported using the VPC subnet ID, e.g.

docs/resources/vpc_v1.md

@@ -59,6 +59,13 @@ In addition to all arguments above, the following attributes are exported:
 
 * `status` - The current status of the VPC. Possible values are as follows: CREATING, OK or ERROR.
 
+## Timeouts
+
+This resource provides the following timeouts configuration options:
+
+* `create` - Default is 10 minute.
+* `delete` - Default is 3 minute.
+
 ## Import
 
 VPCs can be imported using the `id`, e.g.

docs/resources/vpcep_approval.md

@@ -66,14 +66,14 @@ The following arguments are supported:
 * `endpoints` (Required) - Specifies the list of VPC endpoint IDs which accepted to connect to VPC endpoint service.
     The VPC endpoints will be rejected when the resource was destroyed.
 
+* `region` - The region in which to obtain the VPC endpoint service.
+
 ## Attributes Reference
 
 In addition to all arguments above, the following attributes are exported:
 
 * `id` - The unique ID in UUID format which equals to the ID of the VPC endpoint service.
 
-* `region` - The region in which to obtain the VPC endpoint service.
-
 * `connections` - An array of VPC endpoints connect to the VPC endpoint service. Structure is documented below.
     - `endpoint_id` - The unique ID of the VPC endpoint.
     - `packet_id` - The packet ID of the VPC endpoint.
@@ -85,4 +85,4 @@ In addition to all arguments above, the following attributes are exported:
 This resource provides the following timeouts configuration options:
 
 * `create` - Default is 10 minute.
-* `delete` - Default is 3 minute.
+* `delete` - Default is 10 minute.

docs/resources/vpcep_service.md

@@ -35,62 +35,69 @@ resource "flexibleengine_vpcep_service" "demo" {
 
 The following arguments are supported:
 
-* `name` (Optional) - Specifies the name of the VPC endpoint service. The value contains a maximum of
+* `name` (Optional, String) - Specifies the name of the VPC endpoint service. The value contains a maximum of
     16 characters, including letters, digits, underscores (_), and hyphens (-).
 
-* `vpc_id` (Required) - Specifies the ID of the VPC to which the backend resource of
+* `vpc_id` (Required, String, ForceNew) - Specifies the ID of the VPC to which the backend resource of
     the VPC endpoint service belongs. Changing this creates a new VPC endpoint service.
 
 * `server_type` (Required) - Specifies the backend resource type. The value can be **VM**, **VIP** or **LB**.
     Changing this creates a new VPC endpoint service.
 
-* `port_id` (Required) - Specifies the ID for identifying the backend resource of the VPC endpoint service.
+* `port_id` (Required, String) - Specifies the ID for identifying the backend resource of the VPC endpoint service.
     - If the `server_type` is **VM**, the value is the NIC ID of the ECS where the VPC endpoint service is deployed.
     - If the `server_type` is **VIP**, the value is the NIC ID of the physical server where virtual resources are created.
     - If the `server_type` is **LB**, the value is the ID of the port bound to the private IP address of the load balancer.
 
-* `port_mapping` (Required) - Specified the port mappings opened to the VPC endpoint service.
+* `port_mapping` (Required, List) - Specified the port mappings opened to the VPC endpoint service.
     Structure is documented below.
 
-* `approval` (Optional) - Specifies whether connection approval is required. The default value is false.
+* `approval` (Optional, Bool) - Specifies whether connection approval is required. The default value is false.
 
-* `permissions` (Optional) - Specifies the list of accounts to access the VPC endpoint service.
+* `permissions` (Optional, Set) - Specifies the list of accounts to access the VPC endpoint service.
     The record is in the `iam:domain::domain_id` format, while `*` allows all users to access the VPC endpoint service.
 
-* `tags` - (Optional) The key/value pairs to associate with the VPC endpoint service.
+* `tags` - (Optional, Map) The key/value pairs to associate with the VPC endpoint service.
 
 The `port_mapping` block supports:
 
-* `protocol` - (Optional) Specifies the protocol used in port mappings.
+* `protocol` - (Optional, String) Specifies the protocol used in port mappings.
     The value can be *TCP* or *UDP*. The default value is *TCP*.
 
-* `service_port` - (Optional) Specifies the port for accessing the VPC endpoint service.
+* `service_port` - (Optional, Int) Specifies the port for accessing the VPC endpoint service.
     This port is provided by the backend service to provide services. The value ranges from 1 to 65535.
 
-* `terminal_port` - (Optional) Specifies the port for accessing the VPC endpoint.
+* `terminal_port` - (Optional, Int) Specifies the port for accessing the VPC endpoint.
     This port is provided by the VPC endpoint, allowing you to access the VPC endpoint service.
     The value ranges from 1 to 65535.
 
+* `region` - The region in which to create the VPC endpoint service.
+
+* `service_type` - (Required, String, ForceNew)The type of the VPC endpoint service. Only **interface** can be configured.
+
 ## Attributes Reference
 
 In addition to all arguments above, the following attributes are exported:
 
 * `id` - The unique ID of the VPC endpoint service.
 
-* `region` - The region in which to create the VPC endpoint service.
-
 * `status` - The status of the VPC endpoint service. The value can be **available** or **failed**.
 
 * `service_name` - The full name of the VPC endpoint service in the format: *region.name.id*.
 
-* `service_type` - The type of the VPC endpoint service. Only **interface** can be configured.
-
 * `connections` - An array of VPC endpoints connect to the VPC endpoint service. Structure is documented below.
     - `endpoint_id` - The unique ID of the VPC endpoint.
     - `packet_id` - The packet ID of the VPC endpoint.
     - `domain_id` - The user's domain ID.
     - `status` - The connection status of the VPC endpoint.
 
+## Timeouts
+
+This resource provides the following timeouts configuration options:
+
+* `create` - Default is 10 minute.
+* `delete` - Default is 10 minute.
+
 ## Import
 
 VPC endpoint services can be imported using the `id`, e.g.