Skip to content
This repository has been archived by the owner on Sep 8, 2021. It is now read-only.

Removed a line for clearity #17

Open
wants to merge 1 commit into
base: master
Choose a base branch
from
Open

Removed a line for clearity #17

Changes from all commits
Commits
Show all changes
1 commit
Select commit
File filter

Filter by extension

Filter by extension
Conversations
Failed to load comments.
Loading
Jump to
Jump to file
Failed to load files.
Loading
Diff view
Diff view
2 changes: 1 addition & 1 deletion docs/tutorials/arduino-basic.md
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -22,7 +22,7 @@ This tutorial will show you how to send data over NB-IoT from an Arduino using t
The serial pins for the SARA-N210 use 3.3V logic and are specified to a max of 4.25V. This means we can't directly connect an Arduino with a 5V operating voltage to the TX pin.

### 3.3V Arduino
The following Arduino boards have 3.3V operating voltage and can be directly connected to the EE-NBIOT-01: Arduino Zero, Arduino MKR Zero, Arduino M0 and Arduino Duo. These boards also benefit from having extra hardware serial ports, so you don't have to use software serial. The hardware serial pins are hooked up to `Serial1` in the board's core source file, and the pins are marked RX1/TX1 or just RX/TX on the board header connections.
The following Arduino boards have 3.3V operating voltage and can be directly connected to the EE-NBIOT-01: Arduino Zero, Arduino MKR Zero, Arduino M0 and Arduino Duo. These boards also benefit from having extra hardware serial ports, so you don't have to use software serial. The hardware serial pins are hooked up to `Serial1` in the board's core source file.

In Norway you should be able to find them in any of these stores:
* [Kjell & Company](https://www.kjell.com/no/)
Expand Down