Remove year from copyright lines

Signed-off-by: Sara Damiano <[email protected]>

examples/DRWI_2G/DRWI_2G.ino

@@ -3,11 +3,10 @@
  * @brief Example for DRWI CitSci 2G sites.
  *
  * @author Sara Geleskie Damiano <[email protected]>
- * @copyright (c) 2017-2022 Stroud Water Research Center (SWRC)
- *                          and the EnviroDIY Development Team
- *            This example is published under the BSD-3 license.
+ * @copyright Stroud Water Research Center
+ * This example is published under the BSD-3 license.
  *
- * Build Environment: Visual Studios Code with PlatformIO
+ * Build Environment: Visual Studio Code with PlatformIO
  * Hardware Platform: EnviroDIY Mayfly Arduino Datalogger
  *
  * DISCLAIMER:

examples/DRWI_DigiLTE/DRWI_DigiLTE.ino

@@ -3,11 +3,10 @@
  * @brief Example for DRWI CitSci LTE sites.
  *
  * @author Sara Geleskie Damiano <[email protected]>
- * @copyright (c) 2017-2022 Stroud Water Research Center (SWRC)
- *                          and the EnviroDIY Development Team
- *            This example is published under the BSD-3 license.
+ * @copyright Stroud Water Research Center
+ * This example is published under the BSD-3 license.
  *
- * Build Environment: Visual Studios Code with PlatformIO
+ * Build Environment: Visual Studio Code with PlatformIO
  * Hardware Platform: EnviroDIY Mayfly Arduino Datalogger
  *
  * DISCLAIMER:

examples/DRWI_Mayfly1/DRWI_Mayfly1.ino

@@ -9,9 +9,8 @@
  * Hydros21 CTD sensor
  *
  * @author Sara Geleskie Damiano <[email protected]>
- * @copyright (c) 2017-2022 Stroud Water Research Center (SWRC)
- *                          and the EnviroDIY Development Team
- *            This example is published under the BSD-3 license.
+ * @copyright Stroud Water Research Center
+ * This example is published under the BSD-3 license.
  *
 
  * Hardware Platform: EnviroDIY Mayfly Arduino Datalogger

examples/DRWI_Mayfly1_WiFi/DRWI_Mayfly1_WiFi.ino

@@ -9,9 +9,8 @@
  * Hydros21 CTD sensor
  *
  * @author Sara Geleskie Damiano <[email protected]>
- * @copyright (c) 2017-2022 Stroud Water Research Center (SWRC)
- *                          and the EnviroDIY Development Team
- *            This example is published under the BSD-3 license.
+ * @copyright Stroud Water Research Center
+ * This example is published under the BSD-3 license.
  *
 
  * Hardware Platform: EnviroDIY Mayfly Arduino Datalogger

examples/DRWI_NoCellular/DRWI_NoCellular.ino

@@ -3,11 +3,10 @@
  * @brief Example for DRWI CitSci without cellular service.
  *
  * @author Sara Geleskie Damiano <[email protected]>
- * @copyright (c) 2017-2022 Stroud Water Research Center (SWRC)
- *                          and the EnviroDIY Development Team
- *            This example is published under the BSD-3 license.
+ * @copyright Stroud Water Research Center
+ * This example is published under the BSD-3 license.
  *
- * Build Environment: Visual Studios Code with PlatformIO
+ * Build Environment: Visual Studio Code with PlatformIO
  * Hardware Platform: EnviroDIY Mayfly Arduino Datalogger
  *
  * DISCLAIMER:

examples/DRWI_SIM7080LTE/DRWI_SIM7080LTE.ino

@@ -10,9 +10,8 @@
  * Campbell Scientific OBS3+ Turbidity sensor
  *
  * @author Sara Geleskie Damiano <[email protected]>
- * @copyright (c) 2017-2022 Stroud Water Research Center (SWRC)
- *                          and the EnviroDIY Development Team
- *            This example is published under the BSD-3 license.
+ * @copyright Stroud Water Research Center
+ * This example is published under the BSD-3 license.
  *
 
  * Hardware Platform: EnviroDIY Mayfly Arduino Datalogger

examples/baro_rho_correction/baro_rho_correction.ino

@@ -3,11 +3,10 @@
  * @brief Example demonstrating calculated variables.
  *
  * @author Sara Geleskie Damiano <[email protected]>
- * @copyright (c) 2017-2022 Stroud Water Research Center (SWRC)
- *                          and the EnviroDIY Development Team
- *            This example is published under the BSD-3 license.
+ * @copyright Stroud Water Research Center
+ * This example is published under the BSD-3 license.
  *
- * Build Environment: Visual Studios Code with PlatformIO
+ * Build Environment: Visual Studio Code with PlatformIO
  * Hardware Platform: EnviroDIY Mayfly Arduino Datalogger
  *
  * DISCLAIMER:

examples/data_saving/data_saving.ino

@@ -3,11 +3,10 @@
  * @brief Example publishing only a portion of the logged variables.
  *
  * @author Sara Geleskie Damiano <[email protected]>
- * @copyright (c) 2017-2022 Stroud Water Research Center (SWRC)
- *                          and the EnviroDIY Development Team
- *            This example is published under the BSD-3 license.
+ * @copyright Stroud Water Research Center
+ * This example is published under the BSD-3 license.
  *
- * Build Environment: Visual Studios Code with PlatformIO
+ * Build Environment: Visual Studio Code with PlatformIO
  * Hardware Platform: EnviroDIY Mayfly Arduino Datalogger
  *
  * DISCLAIMER:

examples/double_logger/double_logger.ino

@@ -3,11 +3,10 @@
  * @brief Example logging at two different timing intervals
  *
  * @author Sara Geleskie Damiano <[email protected]>
- * @copyright (c) 2017-2022 Stroud Water Research Center (SWRC)
- *                          and the EnviroDIY Development Team
- *            This example is published under the BSD-3 license.
+ * @copyright Stroud Water Research Center
+ * This example is published under the BSD-3 license.
  *
- * Build Environment: Visual Studios Code with PlatformIO
+ * Build Environment: Visual Studio Code with PlatformIO
  * Hardware Platform: EnviroDIY Mayfly Arduino Datalogger
  *
  * DISCLAIMER:

examples/logging_to_MMW/logging_to_MMW.ino

@@ -3,11 +3,10 @@
  * @brief Example logging data and publishing to Monitor My Watershed.
  *
  * @author Sara Geleskie Damiano <[email protected]>
- * @copyright (c) 2017-2022 Stroud Water Research Center (SWRC)
- *                          and the EnviroDIY Development Team
- *            This example is published under the BSD-3 license.
+ * @copyright Stroud Water Research Center
+ * This example is published under the BSD-3 license.
  *
- * Build Environment: Visual Studios Code with PlatformIO
+ * Build Environment: Visual Studio Code with PlatformIO
  * Hardware Platform: EnviroDIY Mayfly Arduino Datalogger
  *
  * DISCLAIMER:

examples/logging_to_ThingSpeak/logging_to_ThingSpeak.ino

@@ -3,11 +3,10 @@
  * @brief Example logging data and publishing to ThingSpeak.
  *
  * @author Sara Geleskie Damiano <[email protected]>
- * @copyright (c) 2017-2022 Stroud Water Research Center (SWRC)
- *                          and the EnviroDIY Development Team
- *            This example is published under the BSD-3 license.
+ * @copyright Stroud Water Research Center
+ * This example is published under the BSD-3 license.
  *
- * Build Environment: Visual Studios Code with PlatformIO
+ * Build Environment: Visual Studio Code with PlatformIO
  * Hardware Platform: EnviroDIY Mayfly Arduino Datalogger
  *
  * DISCLAIMER:

examples/menu_a_la_carte/menu_a_la_carte.ino

@@ -3,11 +3,10 @@
  * @brief Example with all possible functionality.
  *
  * @author Sara Geleskie Damiano <[email protected]>
- * @copyright (c) 2017-2022 Stroud Water Research Center (SWRC)
- *                          and the EnviroDIY Development Team
- *            This example is published under the BSD-3 license.
+ * @copyright Stroud Water Research Center
+ * This example is published under the BSD-3 license.
  *
- * Build Environment: Visual Studios Code with PlatformIO
+ * Build Environment: Visual Studio Code with PlatformIO
  * Hardware Platform: EnviroDIY Mayfly Arduino Datalogger
  *
  * DISCLAIMER:
@@ -1377,8 +1376,8 @@ Variable* mplTemp = new FreescaleMPL115A2_Temp(
 byte gplp8ModbusAddress = 0x19;  // The modbus address of the gplp8
 // Raw Request >>> {0x19, 0x03, 0x00, 0xC8, 0x00, 0x01, 0x06, 0x2C}
 const int8_t  gplp8AdapterPower   = sensorPowerPin;  // RS485 adapter power pin
-const int8_t  gplp8SensorPower    = A3;  // Sensor power pin
-const int8_t  gplp8EnablePin      = -1;                    // Adapter RE/DE pin
+const int8_t  gplp8SensorPower    = A3;              // Sensor power pin
+const int8_t  gplp8EnablePin      = -1;              // Adapter RE/DE pin
 const uint8_t gplp8NumberReadings = 1;
 // The manufacturer recommends averaging 10 readings, but we take 5 to minimize
 // power consumption

examples/simple_logging/simple_logging.ino

@@ -3,11 +3,10 @@
  * @brief A simple data logging example.
  *
  * @author Sara Geleskie Damiano <[email protected]>
- * @copyright (c) 2017-2022 Stroud Water Research Center (SWRC)
- *                          and the EnviroDIY Development Team
- *            This example is published under the BSD-3 license.
+ * @copyright Stroud Water Research Center
+ * This example is published under the BSD-3 license.
  *
- * Build Environment: Visual Studios Code with PlatformIO
+ * Build Environment: Visual Studio Code with PlatformIO
  * Hardware Platform: EnviroDIY Mayfly Arduino Datalogger
  *
  * DISCLAIMER:

examples/simple_logging_LearnEnviroDIY/simple_logging_LearnEnviroDIY.ino

@@ -3,11 +3,10 @@
  * @brief A data logging example for the Learn EnviroDIY tutorial.
  *
  * @author Sara Geleskie Damiano <[email protected]>
- * @copyright (c) 2017-2022 Stroud Water Research Center (SWRC)
- *                          and the EnviroDIY Development Team
- *            This example is published under the BSD-3 license.
+ * @copyright Stroud Water Research Center
+ * This example is published under the BSD-3 license.
  *
- * Build Environment: Visual Studios Code with PlatformIO
+ * Build Environment: Visual Studio Code with PlatformIO
  * Hardware Platform: EnviroDIY Mayfly Arduino Datalogger
  *
  * DISCLAIMER:

examples/single_sensor/single_sensor.ino

@@ -3,11 +3,10 @@
  * @brief An example using only sensor functions and no logging.
  *
  * @author Sara Geleskie Damiano <[email protected]>
- * @copyright (c) 2017-2022 Stroud Water Research Center (SWRC)
- *                          and the EnviroDIY Development Team
- *            This example is published under the BSD-3 license.
+ * @copyright Stroud Water Research Center
+ * This example is published under the BSD-3 license.
  *
- * Build Environment: Visual Studios Code with PlatformIO
+ * Build Environment: Visual Studio Code with PlatformIO
  * Hardware Platform: EnviroDIY Mayfly Arduino Datalogger
  *
  * DISCLAIMER:

src/LoggerBase.cpp

@@ -1,7 +1,8 @@
 /**
  * @file LoggerBase.cpp
- * @copyright 2017-2022 Stroud Water Research Center
- * Part of the EnviroDIY ModularSensors library for Arduino
+ * @copyright Stroud Water Research Center
+ * Part of the EnviroDIY ModularSensors library for Arduino.
+ * This library is published under the BSD-3 license.
  * @author Sara Geleskie Damiano <[email protected]>
  *
  * @brief Implements the Logger class.

src/LoggerBase.h

@@ -1,7 +1,8 @@
 /**
  * @file LoggerBase.h
- * @copyright 2017-2022 Stroud Water Research Center
- * Part of the EnviroDIY ModularSensors library for Arduino
+ * @copyright Stroud Water Research Center
+ * Part of the EnviroDIY ModularSensors library for Arduino.
+ * This library is published under the BSD-3 license.
  * @author Sara Geleskie Damiano <[email protected]>
  *
  * @brief Contains the LoggerBase class which handles basic logging functions.

src/LoggerModem.cpp

@@ -1,7 +1,8 @@
 /**
  * @file LoggerModem.cpp
- * @copyright 2017-2022 Stroud Water Research Center
- * Part of the EnviroDIY ModularSensors library for Arduino
+ * @copyright Stroud Water Research Center
+ * Part of the EnviroDIY ModularSensors library for Arduino.
+ * This library is published under the BSD-3 license.
  * @author Sara Geleskie Damiano <[email protected]>
  *
  * @brief Implements the loggerModem class.

src/LoggerModem.h

@@ -1,7 +1,8 @@
 /**
  * @file LoggerModem.h
- * @copyright 2017-2022 Stroud Water Research Center
- * Part of the EnviroDIY ModularSensors library for Arduino
+ * @copyright Stroud Water Research Center
+ * Part of the EnviroDIY ModularSensors library for Arduino.
+ * This library is published under the BSD-3 license.
  * @author Sara Geleskie Damiano <[email protected]>
  *
  * @brief Contains the loggerModem class and the variable subclasses

src/ModSensorDebugger.h

@@ -1,7 +1,8 @@
 /**
  * @file       ModSensorDebugger.h
- * @copyright 2017-2022 Stroud Water Research Center
- * Part of the EnviroDIY ModularSensors library for Arduino
+ * @copyright Stroud Water Research Center
+ * Part of the EnviroDIY ModularSensors library for Arduino.
+ * This library is published under the BSD-3 license.
  * @author Sara Geleskie Damiano <[email protected]> *
  * @author Volodymyr Shymanskyy
  *

src/ModularSensors.h

@@ -1,7 +1,8 @@
 /**
  * @file ModularSensors.h
- * @copyright 2017-2022 Stroud Water Research Center
- * Part of the EnviroDIY ModularSensors library for Arduino
+ * @copyright Stroud Water Research Center
+ * Part of the EnviroDIY ModularSensors library for Arduino.
+ * This library is published under the BSD-3 license.
  * @author Sara Geleskie Damiano <[email protected]>
  *
  * @brief A simple include file for the Arduino command line interface (CLI).s

src/SensorBase.cpp

@@ -1,7 +1,8 @@
 /**
  * @file SensorBase.cpp
- * @copyright 2017-2022 Stroud Water Research Center
- * Part of the EnviroDIY ModularSensors library for Arduino
+ * @copyright Stroud Water Research Center
+ * Part of the EnviroDIY ModularSensors library for Arduino.
+ * This library is published under the BSD-3 license.
  * @author Sara Geleskie Damiano <[email protected]>
  *
  * @brief Implements the Sensor class.

src/SensorBase.h

@@ -1,7 +1,8 @@
 /**
  * @file SensorBase.h
- * @copyright 2017-2022 Stroud Water Research Center
- * Part of the EnviroDIY ModularSensors library for Arduino
+ * @copyright Stroud Water Research Center
+ * Part of the EnviroDIY ModularSensors library for Arduino.
+ * This library is published under the BSD-3 license.
  * @author Sara Geleskie Damiano <[email protected]>
  *
  * @brief Contains the Sensor class.
@@ -39,7 +40,7 @@
  * @brief The largest number of variables from a single sensor
  */
 #define MAX_NUMBER_VARS 21
-    // GroPoint Profile GPLP-8 has 8 Moisture and 13 Temperature values
+// GroPoint Profile GPLP-8 has 8 Moisture and 13 Temperature values
 
 class Variable;  // Forward declaration
 

src/VariableArray.cpp

@@ -1,7 +1,8 @@
 /**
  * @file VariableArray.cpp
- * @copyright 2017-2022 Stroud Water Research Center
- * Part of the EnviroDIY ModularSensors library for Arduino
+ * @copyright Stroud Water Research Center
+ * Part of the EnviroDIY ModularSensors library for Arduino.
+ * This library is published under the BSD-3 license.
  * @author Sara Geleskie Damiano <[email protected]>
  *
  * @brief Implements the VariableArray class.

src/VariableArray.h

@@ -1,7 +1,8 @@
 /**
  * @file VariableArray.h
- * @copyright 2017-2022 Stroud Water Research Center
- * Part of the EnviroDIY ModularSensors library for Arduino
+ * @copyright Stroud Water Research Center
+ * Part of the EnviroDIY ModularSensors library for Arduino.
+ * This library is published under the BSD-3 license.
  * @author Sara Geleskie Damiano <[email protected]>
  *
  * @brief Contains the VariableArray class.

src/VariableBase.cpp

@@ -1,7 +1,8 @@
 /**
  * @file VariableBase.cpp
- * @copyright 2017-2022 Stroud Water Research Center
- * Part of the EnviroDIY ModularSensors library for Arduino
+ * @copyright Stroud Water Research Center
+ * Part of the EnviroDIY ModularSensors library for Arduino.
+ * This library is published under the BSD-3 license.
  * @author Sara Geleskie Damiano <[email protected]>
  *
  * @brief Implements the Variable class.

src/VariableBase.h

@@ -1,7 +1,8 @@
 /**
  * @file VariableBase.h
- * @copyright 2017-2022 Stroud Water Research Center
- * Part of the EnviroDIY ModularSensors library for Arduino
+ * @copyright Stroud Water Research Center
+ * Part of the EnviroDIY ModularSensors library for Arduino.
+ * This library is published under the BSD-3 license.
  * @author Sara Geleskie Damiano <[email protected]>
  *
  * @brief Contains the Variable class.

src/WatchDogs/WatchDogAVR.cpp

@@ -1,7 +1,8 @@
 /**
  * @file WatchDogAVR.cpp
- * @copyright 2017-2022 Stroud Water Research Center
- * Part of the EnviroDIY ModularSensors library for Arduino
+ * @copyright Stroud Water Research Center
+ * Part of the EnviroDIY ModularSensors library for Arduino.
+ * This library is published under the BSD-3 license.
  * @author Sara Geleskie Damiano <[email protected]>
  *
  * @brief Implements the extendedWatchDogAVR class.

src/WatchDogs/WatchDogAVR.h

@@ -1,7 +1,8 @@
 /**
  * @file WatchDogAVR.h
- * @copyright 2017-2022 Stroud Water Research Center
- * Part of the EnviroDIY ModularSensors library for Arduino
+ * @copyright Stroud Water Research Center
+ * Part of the EnviroDIY ModularSensors library for Arduino.
+ * This library is published under the BSD-3 license.
  * @author Sara Geleskie Damiano <[email protected]>
  *
  * @brief Contains the extendedWatchDogAVR class