USV Detection

Before vocalizations can be detected, an audio folder, neural network folder, and output folder must be selected.

After detecting calls, we recommend using a post hoc denoising network to remove false positives.

To process a single file:

1. Select the desired audio file in the "Audio Files" drop-down menu

2. Select an appropriate neural network in the "Neural Networks" drop-down menu

3. Click "Detect Calls"

4. Enter detection settings as described below, and click "OK"

To process files in a batch, or to process a single file with multiple networks:

1. Click "Multi Detect"

2. A list of the audio files in the current folder will appear. Select the desired audio files. Multiple files may be selected by holding the Ctrl key while clicking. Click "OK" to proceed.

3. After selecting the audio file(s), a box will appear, listing available neural networks. Select a maximum of two, and click "OK".

4. Enter detection settings as described below, and click "OK".

Detection Settings:

• Total Analysis Length

  • Length, in seconds, of the audio file to process.

  • Set to 0 to process the entire file

  • If analysis length is greater than the file duration, a warning will be displayed in the command line, and the entire file will be processed

• Analysis Chunk Length

  • Length of the audio sections to process at a time, in seconds

  • Files are processed in short chunks. The maximum length of each chunk is dependent on available GPU memory, frequency cutoffs, and the neural network

  • We found that a GPU with two gigabytes of memory performs well with four second chunks for short rat and mouse calls, and fifteen second chunks for long rat calls

  • If the GPU runs out of memory, a warning message will be displayed in the command line

• Overlap

  • Amount of overlap between audio chunks, in seconds

  • Value should be about the length of a call

• Frequency Cut Off High

  • Regions of the spectrogram above this value are ignored

• Frequency Cut Off Low

  • Regions of the spectrogram below this value are ignored

• Score Threshold

  • Detected items with a score (likelihood of being a hit) below this value are automatically removed

• Power Threshold

  • Detected items with an amplitude below this value are automatically removed

• Append Date to File Name

  • If value is "1", the detection time will be appended to the end of the file nameof the file name

• Spectrogram Gain

  • If value is "1", no gain will be applied to the audio file. Values greater than 1 will boost the volume of the audio file. This is experimental, and only recommended for files that are very quiet.