dasharo-compatibility/cpu-fan-speed-measure.robot: Add fan control tests

Signed-off-by: Sebastian Czapla <[email protected]>
Dasharo · Dec 20, 2024 · 8a90b32 · 8a90b32
1 parent d8ef4a7
commit 8a90b32
Show file tree

Hide file tree

Showing 2 changed files with 79 additions and 10 deletions.
diff --git a/dasharo-compatibility/cpu-fan-speed-measure.robot b/dasharo-compatibility/cpu-fan-speed-measure.robot
@@ -23,15 +23,85 @@ Suite Teardown      Run Keyword
 
 
 *** Test Cases ***
-FAN001.001 CPU fan speed measure
-    [Documentation]    Check whether there's a possibility to measure CPU fan
-    ...    current speed.
+# TODO: Bring back these tests once ACPI driver and fw support is developed
+# FAN001.001 CPU fan speed measure
+#    [Documentation]    Check whether there's a possibility to measure CPU fan
+#    ...    current speed.
+#    Skip If    not ${TESTS_IN_UBUNTU_SUPPORT}    FAN001.001 not supported
+#    Skip If    not ${FAN_SPEED_MEASURE_SUPPORT}    FAN001.001 not supported
+#    Power On
+#    Login To Linux
+#    Switch To Root User
+#    Prepare Lm-sensors
+#    ${output}=    Get RPM Value From System76 Acpi
+#    Should Not Be Empty    ${output}
+#    Should Not Be Equal    ${output}    0
+
+# FAN001.002 All available fans are running
+#    [Documentation]    Check if all available fans are running
+#    Skip If    not ${TESTS_IN_UBUNTU_SUPPORT}    FAN001.001 not supported
+#    Skip If    not ${FAN_SPEED_MEASURE_SUPPORT}    FAN001.001 not supported
+#    Power On
+#    Login To Linux
+#    Switch To Root User
+#    Prepare Lm-sensors
+#    Execute Command In Terminal    stress-ng -c $(nproc) -t 10
+#    ${output}=    Execute Command In Terminal    sensors | grep "CPU fan"
+#    Should Not Be Empty    ${output}
+#    Should Not Be Equal    ${output}    0
+
+# TODO: Previously, this test was documented as FAN001.002, specific
+#    to Asus KGPE platforms. Determine if it possible to use this
+#    on other platforms.
+# FAN001.003 Check if increasing CPU temperature increases CPU fan speed
+#    [Documentation]    This test aims to verify that CPU fan speed
+#    ...    responds properly to increasing CPU temperature.
+
+# TODO: Determine if it is possible to get RPM values from graphics card.
+#    It is possible on some of the NVIDIA cards using nvidia-smi
+# FAN002.001 GPU fan speed measure
+#    [Documentation]    The fan has been configured to follow a custom curve.
+#    ...    This test aims to verify that the fan curve is configured correctly
+#    ...    and the fan spins up and down according to the defined values.
+
+FAN003.001 Fans are turning off during suspend mode (ME Enabled)
+    [Documentation]    Check for correct behavior
+    Skip If    not ${TESTS_IN_UBUNTU_SUPPORT}    FAN003.001 not supported
+    Skip If    not ${FAN_SPEED_MEASURE_SUPPORT}    FAN001.001 not supported
+    Power On
+    Set UEFI Option    MeMode    Enabled
+    Login To Linux
+    Switch To Root User
+    Prepare Lm-sensors
+    Detect Or Install FWTS
+    Log To Console    \nPlease check fan state manually
+    Execute Command In Terminal    fwts s3 -f -r /tmp/suspend_test_log.log    90
+    Log To Console    \nFan state test ended, please note the result
+
+FAN003.002 Fans are turning off during suspend mode (ME Soft disable)
+    [Documentation]    Check for correct behavior
+    Skip If    not ${TESTS_IN_UBUNTU_SUPPORT}    FAN003.002 not supported
+    Skip If    not ${FAN_SPEED_MEASURE_SUPPORT}    FAN001.001 not supported
+    Power On
+    Set UEFI Option    MeMode    Disabled (Soft)
+    Login To Linux
+    Switch To Root User
+    Prepare Lm-sensors
+    Detect Or Install FWTS
+    Log To Console    \nPlease check fan state manually
+    Execute Command In Terminal    fwts s3 -f -r /tmp/suspend_test_log.log    90
+    Log To Console    \nFan state test ended, please note the result
+
+FAN003.003 Fans are turning off during suspend mode (ME HAP disable)
+    [Documentation]    Check for correct behavior
+    Skip If    not ${TESTS_IN_UBUNTU_SUPPORT}    FAN003.002 not supported
     Skip If    not ${FAN_SPEED_MEASURE_SUPPORT}    FAN001.001 not supported
-    Skip If    not ${TESTS_IN_UBUNTU_SUPPORT}    FAN001.001 not supported
     Power On
+    Set UEFI Option    MeMode    Disabled (HAP)
     Login To Linux
     Switch To Root User
     Prepare Lm-sensors
-    ${output}=    Get RPM Value From System76 Acpi
-    Should Not Be Empty    ${output}
-    Should Not Be Equal    ${output}    0
+    Detect Or Install FWTS
+    Log To Console    \nPlease check fan state manually
+    Execute Command In Terminal    fwts s3 -f -r /tmp/suspend_test_log.log    90
+    Log To Console    \nFan state test ended, please note the result
diff --git a/keywords.robot b/keywords.robot
@@ -1544,9 +1544,8 @@ Get Temperature CURRENT
 Get RPM Value From System76 Acpi
     [Documentation]    Returns current RPM value of CPU fan form driver
     ...    system76_acpi.
-    ${speed}=    Execute Command In Terminal    sensors | grep "CPU fan"
-    ${speed_split}=    Split String    ${speed}
-    ${rpm}=    Get From List    ${speed_split}    2
+    ${rpm}=    Execute Command In Terminal    sensors | grep "CPU fan" | awk '{print $3}'
+    Should Not Be Empty    ${rpm}
     RETURN    ${rpm}
 
 Disable Option In Submenu