The Kraken by Omranello [ LDO 3004AC - S40] NEMA17 Stepper motor ( limited edition ) SOLD OUT

Welcome to the official repository for the Kraken Motor – a high-torque, powerful, and audibly impressive motor designed for a wide range of applications but not for the fain of heart.

Whats in the box

• HardCase: Protecting the Heavy motor for shipping , and reducing the Carboard waste by providing a reusable box.
• The Kraken: a 60mm long NEMA17 with 40mm long [D Cut] shaft , equiped with internal thermistor [PT1000] to mesure the actual motor tempreture.
• Powge GT2 30T: A timing gear that utilize the Low-end tourqe sweet spot (you can use whatever match your setup needs).
• 6 wires cable: That includes the 2 white color thermistor cable [the ends are not crimped, allowing you to use what match your MCU setup]

The All New Kraken V2 [ LDO 3004AH - S37 ] NEMA17 Stepper motor ( High Tempreture )

This is the Latest Version Kraken V2 – Very impressive performance to match 20T and 25T Gearing, Runs very cool , and loves to be pushed hard with Higher voltage and Amps.

Features

• Voltage Range: Operates efficiently from 24V to 60V.
• Voltage AMP: Can go up to 3 AMP
• High Torque: Exceptional Power to handle heavy loads. Very high [low-end] torque >> Check the Datasheet and torque curve <<
• Low Vibration: Showed way lower vibration incompareson to other motors
• Heat: It runs way cooler than V1 kraken , and could run without cooling.

Where to buy : Offical stores

NOTE:if you are buying more than 2 motors from Aliexpress >> SPLIT THE ORDER TO 2 ORDERS TO REDUCE SHIPPING BY NEARLY 50%

• Worldwide : D3vil Design store - Aliexpress
• Europe : Meltbro.com
• USA: PeeDee3d.com
• Australia: Raven3dtech.com.au

Check our channel for support Kraken channel

For Collaboration and distribution kindly email [email protected] / [email protected]

Special Thanks to all those help in testing and supporting this project The team @ D3vil design and the pioneers who purchased the motor and took this opportunity to help refine thise product for the market and the community... THANK YOU!!

Austin Lee (Budz) V1 and V2 Special thanks for the intensive testing for the New Kraken V2

Derrick Darrell - V1

Shima - V1

Bryan smith (Zarboz) - V1

Daniel Raine from Ferrari Italy - V1

Philip from Meltbro - V1 and V2

Steven from CRYD Team Germany - V1