:alert: This repository was updated after too many years of being stale :alert:
I've removed everything that wasn't working any more and provided a more clear way how to add this.
For previous notes, please dive into the older commits :)
- An ESP8266 (or compatible)
- A C1101 board (including coil)
- Some tinkering see Mechanics
- Manually placing some files inside of Home Assistants
/config/esphomedirectory
Ensure you have the hardware ready (Mechanics) and the esphome add-on installed
- Copy the directory structure of
configinto HA's/config(or manually ensure you have the dirITHOand it contents present in/config/esphomeand start configuring from the UI - See the sample contents in
/config/esphome/itho.yamlfor some idea of what is neccesary (obviously needs keys and secrets changed) - Build and install on the ESP of you choice from Home Assistant
- Go into HA, choose
integrationsand add your ITHO (it should auto-discover it). - If everything goes well, you'll see
switch.fansend...and quiet a few others popping up. - Enjoy!
- Sending High/Medium/Low and the Timers work
- Reading state and indicative time (not counting down (yet) - should HA or ESPhome do that?)
Trying to get ESPHome to mimic what is comprised in
- https://github.com/jodur/ESPEASY_Plugin_ITHO/blob/master/_P145_Itho.ino
- https://github.com/adri/IthoEcoFanRFT / https://github.com/supersjimmie/IthoEcoFanRFT
Connections between the CC1101 and the ESP8266 or Arduino:
CC11xx pins ESP pins Arduino pins Description
* 1 - VCC VCC VCC 3v3
* 2 - GND GND GND Ground
* 3 - MOSI 13=D7 Pin 11 Data input to CC11xx
* 4 - SCK 14=D5 Pin 13 Clock pin
* 5 - MISO/GDO1 12=D6 Pin 12 Data output from CC11xx / serial clock from CC11xx
* 6 - GDO2 04=D2 Pin 2 Programmable output
* 7 - GDO0 ? Pin ? Programmable output
* 8 - CSN 15=D8 Pin 10 Chip select / (SPI_SS)
- Home Assistant
- ESPHome
- https://github.com/CoMPaTech/esphome_itho