The title was doubling up based ont he filename

BrewNinja · Feb 29, 2024 · d4baefb · d4baefb
1 parent 64b67b0
commit d4baefb
Show file tree

Hide file tree

Showing 9 changed files with 1 addition and 17 deletions.
diff --git a/wiki/Assembling.md b/wiki/Assembling.md
@@ -1,5 +1,3 @@
-# Assembling
-
 **NOTE: Currently pins may feel very loose, this is by design to allow for room for glue or epoxy (recommended) to set.  Normally press fit is good enough for testined, but for actual use make sure to secure the pins properly.**
 
 **NOTE: D2HW shuttle is not compatible with Hall Effects, and D2HW back plate will affect cooling.**

diff --git a/wiki/BOM.md → wiki/Bill-of-Materials.md b/wiki/BOM.md → wiki/Bill-of-Materials.md
@@ -1,5 +1,3 @@
-# Bill of Materials
-
 All parts (screws, magnets, etc) are Voron, and Voron Tap standards.
 
 1. [Shuttle](#shuttle)

diff --git a/wiki/Configuration.md b/wiki/Configuration.md
@@ -1,5 +1,3 @@
-# Configuration
-
 Toolchangers start with number 0, and count up. So for all the configs, make sure you change all sections. IE, in your T1 config, make sure its extruder1, fan1, etc. See the examples.  **NOTE: The only except to this rule is T0 extruder has no number.**
 
 1. [Toolhead Configuration](#toolheads-configuration)

diff --git a/wiki/Contributors.md b/wiki/Contributors.md
@@ -1,5 +1,3 @@
-# Contributors
-
 | Github   	| Discord    	| Main Role     |
 |---------	|---------	|---------      |
 | [Hellsparks](https://github.com/Hellsparks/) | _hellspark | Designer |

diff --git a/wiki/Docks.md b/wiki/Docks.md
@@ -1,5 +1,3 @@
-# Docks
-
 Currently all docks used with [Viesturz's Tapchanger](https://github.com/viesturz/tapchanger) are compatible.  In the future we might develop our own.
 
 **NOTE: the DB dock in the Tapchanger repo uses custom Cowl that is not compatible or supported by Stealthchanger.  We recommend to always use the original cowls for all tools.  If you mods use that dock please see the [usermod](https://github.com/Hellsparks/StealthChanger/blob/main/UserMods/OstroMa/DB_Cowl_v8_with_TapChanger_Dock_Hooks.stl) for a merged version with proper original bolt locations.**

diff --git a/wiki/Home.md b/wiki/Home.md
@@ -13,7 +13,7 @@ All parts are easily replaceable without reprinting if wear happens, life of the
 Currently we support the standard Stealth Burner, Dragon Burner, and Rapid Burner.  There are plans in place to add the Mini Stealth Burner, XOL, and Archetype.
 
 
-1. [Bill of Materials](BOM)
+1. [Bill of Materials](Bill-of-Materials)
 2. [Printing](Printing)
 3. [Assembling](Assembling)
 4. [Installation](Installation)

diff --git a/wiki/Installation.md b/wiki/Installation.md
@@ -1,5 +1,3 @@
-# Installation
-
 All sections are required, so please follow all steps carefully.
 
 1. [Klipper Addon](#klipper-addon)

diff --git a/wiki/Printing.md b/wiki/Printing.md
@@ -1,5 +1,3 @@
-# Printing
-
 1. [Parts](#parts)
 2. [Settings](#settings)
 3. [Orientation](#orientation)

diff --git a/wiki/Support.md b/wiki/Support.md
@@ -1,5 +1,3 @@
-# Support and FAQs
-
 1. [Methods](#methods)
 2. [FAQs](#faqs)
 3. [Build Guides](#build-guides)