Fix working and links

README.md

@@ -27,7 +27,7 @@ Please use our [wiki](../../wiki) for more information and documentation.
 - [Slicers](../../wiki/Slicers)
 - [Serials](../../wiki/Serials)
 - [Support and FAQs](../../wiki/Support-and-FAQs)
-- [Contributing and Donating](../../wiki/Contributing-and-Donating)
+- [Contributing & Donating](../../wiki/Contributing-and-Donating)
 - [Team & Credits](../../wiki/Team-and-Credits)
 
 

wiki/Bill-of-Materials.md

@@ -19,7 +19,10 @@ All parts (screws, magnets, etc) are Voron, and Voron Tap standards.
 
 x1 per toolhead
 
-### All toolheads (per tool)
+
+## Backplate BOM
+
+### All Tools
 
 **Note: heatsets on the SB version in from the opposite side as the Voron instructions, slightly longer screws on the CW2 attachment may be required**
 
@@ -29,7 +32,9 @@ x1 per toolhead
 - [2] m3x6 or m3x8 FHCS (Flat head countersunk screw, MUST BE MAGNETIC. no stainless, as per TAP)
 - [1] [OptoTap sensor](https://s.click.aliexpress.com/e/_DEGsGTV) (only the PCB is required)
 
-### Additional Tool Specific BOM
+
+**The list bellow is in addition to the Stealthburner BOM above.**
+
 
 ### Dragonburner/Rapidburner
 
@@ -43,6 +48,7 @@ x1 per toolhead
 - [1] m3x12 BHCS (to hold the sherpa mount in place)
 - [2] m3 heat inserts
 
+
 ## Endstops
 
 Optional

wiki/Contributing-and-Donating.md

@@ -2,16 +2,20 @@
 
 Follow [Creating a pull request](https://docs.github.com/en/pull-requests/collaborating-with-pull-requests/proposing-changes-to-your-work-with-pull-requests/creating-a-pull-request)
 
+
 ## Design Changes
 
 - Make sure to be detailed about all changes in the Description
 - Make sure to include updated CAD files and all changed STLs
 - Make sure to indicate any manual changes required (including image updates in the manual)
 
+
 ## Wiki/Docu
+
 - Make sure the pull request only contains changes to the `wiki` folder and is in proper [Markdown](https://en.wikipedia.org/wiki/Markdown)
 - Make sure to include a good description
 
+
 ## UserMods
 
 - Make sure the directory in UserMods is your github username
@@ -25,10 +29,11 @@ Follow [Creating a pull request](https://docs.github.com/en/pull-requests/collab
 
 **Not following any of these guide lines will result in the pull request being denied**
 
+
 ## Support via Donation
 
 StealthChanger and all other designs by DraftShift design are fully open source and come at no cost to the user.
 
 If you feel that you would like to contribute by donating, please use either the Paypal or Ko-Fi links below
 
-[![paypal](https://www.paypalobjects.com/en_US/i/btn/btn_donateCC_LG.gif)](https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=QB27XC84YZPA4)  [![ko-fi](https://ko-fi.com/img/githubbutton_sm.svg)](https://ko-fi.com/L3L0XA8TK)
+[![paypal](https://www.paypalobjects.com/en_US/i/btn/btn_donateCC_LG.gif)](https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=QB27XC84YZPA4)  [![ko-fi](https://ko-fi.com/img/githubbutton_sm.svg)](https://ko-fi.com/L3L0XA8TK)

wiki/Home.md

@@ -30,6 +30,6 @@ How are you doing docks? There are a few different ways of doing them, and what
 6. [Docks](Docks)
 7. [Slicers](Slicers)
 8. [Serails](Serials)
-9. [Support and FAQs](Support-and-FAQs)
-10. [Contributing](Contributing)
+9. [Support & FAQs](Support-and-FAQs)
+10. [Contributing & Donating](Contributing-and-Donating)
 11. [Team & Credits](Team-and-Credits)