3D Printable objects used for microscopy and beyond in the Plested lab (www.fmp-berlin.de/plested), Humboldt University and FMP Berlin
Mounts for Princeton Instruments ProEM512 (KP ProEM mount 0.2) and Photometrics Prime95B (KP Prime95B mount 0.2) cameras are included. These cameras have imperial threaded mounting points. The mounts allow the camera to be mounted directly to a M6 tapped 25 mm pitch breadboard, or to standard M6 tapped posts. You will need 8x32 (PI) or 1/4x20 (Photometrics) imperial screws to attach the cameras to mounts.
On a standard Prusa i3 mk3 3D printer (https://www.prusa3d.com), the KP Prime95B mount 0.2 takes about 12 hours to print, and uses about 3€ of PLA. We use standard settings: 15% fill-in, no supports, 0.15mm layers - in other words, the 'QUALITY MK3' setting.
The coverslip holder (KP CSH 0.2) is meant to accept 25 mm 1.5H glass coverslips, for example for STORM or TIRF microscopy. We print this with the 0.05mm ULTRADETAIL setting.
- .scad files are for generating models in openSCAD: https://www.openscad.org
- .stl files are for generating 3D models to print. For example, with Slic3r: https://slic3r.org
Feel free to use these designs for any purpose. Comments and suggestions welcome.
Twitter: @andrewplested
Email: [email protected]