Production files for waffling60DB Rev E3

Production files for waffling60DB Rev E3

Files output in metric, 4:3.

For use in Bakeno-style cases (V1 and V3) or Kei.

Changes:

• Adjust the UDB position to align with the rest of the project. There was a slight offset.

Production files for waffling60SE Rev E3

Production files for waffling60SE Rev E3

Files output in metric, 4:3.

For use in Polaris V1 by ai03

Changes:

• Adding a missing 5-pin switch hole for bottom row

Production files for waffling60NMB Rev E2

Production files for waffling60NMB Rev E2

Files output in metric, 4:3.

Deviations on NMB version due to switch footprint/constraints:

• Different x-axis JST position, further from the PCB center.
• No Rotary encoder on PCB
• No 6U support
• Different encoder header position for off PCB encoder
• Different JTAG tagconnect position
• No caps lock LED

Changes:

• Fixing missing underglow resistors in revision E1

Production files for waffling60DB Rev E2

Production files for waffling60DB Rev E2

Files output in metric, 4:3.

For use in Bakeno-style cases (V1 and V3) or Kei.

Changes:

• Adding underglow, rotary encoder and 6u spacebar support.
• Fixing broken 6U support in revision E1

Production files for waffling60MX Rev E2

Production files for waffling60MX Rev E2

Files output in metric, 4:3.

For use in tray mount cases. Can be used in banekeno-style cases (V1 and V3) if USB-C port is not soldered on. Also compatible with Unikorn R1.

Changes:

• Adding underglow, rotary encoder and 6u spacebar support.
• Fixing broken 6U support in revision E1

Production files for waffling60ALPS Rev E2

Production files for waffling60ALPS Rev E2

Files output in metric, 4:3.

For use in tray mount cases. Can be used in banekeno-style cases (V1 and V3) if USB-C port is not soldered on. Also compatible with Unikorn R1.

Changes:

• Adding underglow, rotary encoder and 6u spacebar support.
• Fixing broken 6U support in revision E1

Production files for waffling60MXHS-ISO Rev E1

This is a pre-release, not yet tested or implemented in QMK and VIA. For now, use Rev D.

Changes from Rev D: Adding underglow and rotary encoder support

Update to pre-release files 2024-10-25: Fixed rotation marking of MCU.

Production files for waffling60MXHS-ANSI Rev E1

Changes from Rev D: Adding underglow and rotary encoder support

Production files for waffling60SE Rev D1

Production files for waffling60SE Rev D1

Files output in metric, 4:3.

For use ai03 Polaris.

Changes:

• switching to APM32F072 or STM32F072 MCU

Production files for waffling60MXHS-ANSI Rev D1

Production files for waffling60MXHS-ANSI Rev D1

Files output in metric, 4:3.

For use in tray mount cases. Can be used in banekeno-style cases (V1 and V3) if USB-C port is not soldered on. Also compatible with Unikorn R1.

Changes:

• switching to APM32F072 or STM32F072 MCU
• anti-shear hotswap footprints
• adding support for both stepped and non-stepped capslock
• removing RGB indicator to support both capslock switch position