1.4.0.0.release - Mexican Waterfalls Adapted #100
Closed
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Here's one!
# Waterfall Effects * Create <EnginesPlumeSWE.cfg> * Add stock waterfall effects * Thank you! 🚀 - @JamesErvin-5 * Work-In-Progress * Requires to use: * Waterfall * Stock Waterfall Effects * Closes #52 - Stock Waterfall Effects
# upstream changes
…obee into 1.4.0.0.-release
* closes #60
* closes #61
* closes #62
* closes #63
## Update [EnginesPlumeSWE.cfg] v1.0.1.0 * Add header/footer * Add license (for now it is CC BY-SA 3.0 Unported) * Add `,StockWaterfallEffects` to the :NEEDS * Thank you to @JamesErvin-5 for submitting these patches * closes #68 - Update [EnginesPlumeSWE.cfg] v1.0.1.0
## Update X1 * closes #69 - Update X1 * [tbee-x1-body] * Add * DRAG_CUBE * [ModuleCargoPart] * type = cylinder * radius = 0.885m * height = 2.39m * volume = 5.880772 m3 // 2.932971 * 1000L = m3 * packedVolume = 6000 * closes #70 - [tbee-x1-body] * [tbee-x1-tail] * Add * DRAG_CUBE * [ModuleCargoPart] * type = cone * radius = 0.625m * height = 3.28m * volume = 1.341722 m3 * 1000L = m3 * packedVolume = 1350 * closes #71 - [tbee-x1-tail] * [tbee-x1-crew] * Add * DRAG_CUBE * [ModuleCargoPart] * type = cylinder * radius = 0.625 m * height = 2.64 m * volume = 0.876033 m3 * 1000L = m3 * packedVolume = 1000 * closes #72 - [tbee-x1-crew] * [tbee-x1-engine] * Add * DRAG_CUBE * [ModuleCargoPart] * type = * radius = 0.625 m * height = 0.74 m * volume = 0.242236 m3 * 1000L = m3 * packedVolume = 300 * closes #73 - [tbee-x1-engine]
## Update X1 * closes #69 - Update X1 * closes #74 - pull request * [tbee-x1-body] * Add * DRAG_CUBE * [ModuleCargoPart] * type = cylinder * radius = 0.885m * height = 2.39m * volume = 5.880772 m3 // 2.932971 * 1000L = m3 * packedVolume = 6000 * closes #70 - [tbee-x1-body] * [tbee-x1-tail] * Add * DRAG_CUBE * [ModuleCargoPart] * type = cone * radius = 0.625m * height = 3.28m * volume = 1.341722 m3 * 1000L = m3 * packedVolume = 1350 * closes #71 - [tbee-x1-tail] * [tbee-x1-crew] * Add * DRAG_CUBE * [ModuleCargoPart] * type = cylinder * radius = 0.625 m * height = 2.64 m * volume = 0.876033 m3 * 1000L = m3 * packedVolume = 1000 * closes #72 - [tbee-x1-crew] * [tbee-x1-engine] * Add * DRAG_CUBE * [ModuleCargoPart] * type = * radius = 0.625 m * height = 0.74 m * volume = 0.242236 m3 * 1000L = m3 * packedVolume = 300 * closes #73 - [tbee-x1-engine]
…obee into 1.4.0.0.-release
* [taerobee-adapter-short.cfg]
* Create part based on Squad's adapterSmallMiniShort
* [rescaleFactor] = 0.5
* [bulkheadProfiles] = size00,size0
* keep variants
* add @thumb
* Update Localization - <en-us.cfg>
* Add
* DRAG_CUBE]
* [ModuleCargoPart]
* type = trunc.cone
* radius = 0.3125 m
* Radius = 0.15625 m
* height = 0.1 m
* volume = 0.0179 m³
* m³ x 1000L = 17.9 m³
* packedVolume = 18
* stackableQuantity = 20
* closes #87 - [taerobee-adapter-short.cfg]
# [taerobee-adapter-tall.cfg]
* Create part based on Squad's adapterSmallMiniTall
* [rescaleFactor] = 0.5
* [bulkheadProfiles] = size00,size0
* keep variants
* add @thumb
* Update Localization - <en-us.cfg>
* Add
* DRAG_CUBE]
* [ModuleCargoPart]
* type = trunc.cone
* radius = 0.3125 m
* Radius = 0.15625 m
* height = 0.3 m
* volume = 0.05369 m³
* m³ x 1000L = 53.69 m³
* packedVolume = 55
* stackableQuantity = 8
* closes #88 - [taerobee-adapter-tall.cfg]
# [taerobee-aerobee.cfg]
* rename part cfg to use hyphen
* change [bulkheadProfiles] from size0 to size00
* FX randsomed until [ModuleEnginesFX] changed back to [ModuleEngines]; FX returned unharmed
* Added [EngineType] = LiquidFuel to [ModuleEngines]]
* Add
* DRAG_CUBE]
* [ModuleCargoPart]
* type = cylinder
* radius = 0.3125 m
* height = 0.43 m
* volume = 0.13192 m³
* m³ x 1000L = 131.93 m³
* packedVolume = 150
* stackableQuantity = 5
* closes #89 - [taerobee-aerobee.cfg]
# [taerobee-control.cfg]
* Rename part cfg to use hyphen
* Change [bulkheadProfiles] from size0 to size00
* Change [ModuleCommand] EC consumption from 0.001 to 0.006 re: early tech worse than 0.005 (21.5/h)
* Add [ModuleSAS] - no level
* Add [ModuleReactionWheel]
* PitchTorque = 0.5
* YawTorque = 0.5
* RollTorque = 0.5
* torqueResponseSpeed = 11
* consumes [ElectricCharge] at a rate of 0.01 re: early tech - worse than 0.0003
* Updates[ModuleDataTransmitter]
* [packetInterval] set to 1.0, was 0.6
* [packetSize] set to 2, was 1
* [antennaPower] set to 5000, was 50000
* Resource [ElectricCharge] upped to 75, was 5 re: same size as Z-100 but earlier tech and other things in part
* Add
* DRAG_CUBE]
* [ModuleCargoPart]
* type = cylinder
* radius = 0.3125 m
* height = 0.1 m
* volume = 0.03068 m³
* m³ x 1000L = 30.68 m³
* packedVolume = 32
* stackableQuantity = 12
* closes #90 - [taerobee-control.cfg]
# [taerobee-decoupler.cfg]
* rename part cfg to use hyphen
* Change [bulkheadProfiles] from size0,srf to size00,srf
* Add
* DRAG_CUBE]
* [ModuleCargoPart]
* type = cylinder
* radius = 0.3125 m
* height = 0.19 m
* volume = 0.05829 m³
* m³ x 1000L = 58.3 m³
* packedVolume = 60
* stackableQuantity = 8
* closes #91 - [taerobee-decoupler.cfg]
# [taerobee-despin.cfg]
* rename part cfg to use hyphen
* change [bulkheadProfiles] from size0 to size00
* Resource [MonoPropellant] amount changed to 3.0 from 1.5
* [ModuleSAS] consumption rate updated from 0.05 to 0.25
* Add
* DRAG_CUBE]
* [ModuleCargoPart]
* type = cylinder
* radius = 0.3125 m
* height = 0.1 m
* volume = 0.03068 m³
* m³ x 1000L = 30.68 m³
* packedVolume = 35
* stackableQuantity = 10
* closes #92 - [taerobee-despin.cfg]
# [taerobee-fin-large.cfg]
* rename part cfg to use hyphen
* Add
* DRAG_CUBE]
* [ModuleCargoPart]
* type = rectangle
* x = 0.36m
* y = 0.72m
* z = 0.02m
* volume = 0.00518 m³
* m³ x 1000L = 5.19 m³
* packedVolume = 6
* stackableQuantity = 12
* closes #93 - [taerobee-fin-large.cfg]
# [taerobee-fin-small.cfg]
* rename part cfg to use hyphen
* Add
* DRAG_CUBE]
* [ModuleCargoPart]
* type = rectangle
* x = 0.37m
* y = 0.72m
* z = 0.04m
* volume = 0.00237 m³
* m³ x 1000L = 2.37 m³
* packedVolume = 3
* stackableQuantity = 20
* closes #94 - [taerobee-fin-small.cfg]
# [taerobee-nosecone.cfg]
* rename part cfg to use hyphen
* change [bulkheadProfiles] from size0 to size00
* Add
* DRAG_CUBE]
* [ModuleCargoPart]
* type = cone
* radius = 0.3125 m
* height = 0.98 m
* volume = .010022 m³
* m³ x 1000L = 100.25 m³
* packedVolume = 125
* stackableQuantity = 4
* closes #95 - [taerobee-nosecone.cfg]
# [taerobee-parachute.cfg]
* rename part cfg to use hyphen
* change [bulkheadProfiles] from size0 to size00
* Updated [attachRules] from 1,0,1,0,0 to 1,0,0,1,0
* Added [buoyancyUseCubeNamed] = PACKED
* Added FX
* [fx_gasBurst_white] = 0.0, 0.0, 0.0, 0.0, 1.0, 0.0, decouple
* [sound_decoupler_fire] = decouple
* Updated [maxTemp] from 2000 to 2250 re: prototype
* Added [emissiveConstant] = 0.7
* Changed [crashTolerence] from 12 to 8
* Added [preferredStage] = PARACHUTESTAGE
* [ModuleParachute]
* [clampMinAirPressure] = 0.04
* [deploymentSpeed] set to 0.12 was 1
* [semiDeploymentSpeed] set to 0.5 was 1
* [chuteMaxTemp] = 650
* [ModuleDragModifier]
* [dragModifier] set to 1.25 was 1
* [ModuleDecouple]
* [ejectionForcePercent] = 100
* [fxGroupName] = decouple
* [menuName] = #TBEE-decoup-menu
* [stagingEnableText] = #TBEE-decoup-enable
* [stagingDisableText] = #TBEE-decoup-disable
* Added [ModuleTestSubject], copied from MK1
* Add
* DRAG_CUBE]
* [ModuleCargoPart]
* type = cone
* radius = 0.3125 m
* height = 0.3 m
* volume = 0.03068 m³
* m³ x 1000L = 30.68 m³
* packedVolume = 35
* stackableQuantity = 12
* closes #96 - [taerobee-parachute.cfg]
[taerobee-science.cfg]
* rename part cfg to use hyphen
* change [bulkheadProfiles] from size0 to size00
* Add
* DRAG_CUBE]
* [ModuleCargoPart]
* type = cylinder
* radius = 0.3125 m
* height = 0.3 m
* volume = 0.09204 m³
* m³ x 1000L = 92.04 m³
* packedVolume = 100
* stackableQuantity = 4
* closes #97 - [taerobee-science.cfg]
# [taerobee-sustainertank-3.cfg]
* rename part cfg to use hyphen
* change [bulkheadProfiles] from size0 to size00
* Add
* DRAG_CUBE]
* [ModuleCargoPart]
* type = cylinder
* radius = 0.3125 m
* height = 2.88 m
* volume = 0.88357 m³
* m³ x 1000L = 883.58 m³
* packedVolume = 900
* stackableQuantity = 1
* closes #98 - [taerobee-sustainertank-3.cfg]
# [taerobee-tinytim.cfg]
* rename part cfg to use hyphen
* change [bulkheadProfiles] from size0 to size00
* FX randsomed until [ModuleEnginesFX] changed back to [ModuleEngines]; FX returned unharmed
* Added [EngineType] = SolidBooster to [ModuleEngines]
* ADD FX
* [fx_exhaustSparks_yellow] = 0.0, -0.17, 0.0, 0.0, 1.0, 0.0, running
* [fx_smokeTrail_medium] = 0.0, -0.17, 0.0, 0.0, 1.0, 0.0, running
* [sound_explosion_low] = flameout
* Adjust [entryCost] = 50 from 0
* Change [category] = Engine from Propulsion
* Add [heatConductivity] = 0.06 note: 1/2 default
* [skinInternalConductionMult] = 4.0
* [emissiveConstant] = 0.5 note: yes, it's white. But let's claim it's an emissive white...
* Change
* [maximum_drag] from 0.3 to 0.2
* [crashTolerance] from 8 to 7
* [maxTemp] from 3400 to 2000
* Add [ModuleJettison]
* Adjust [SolidFuel] resource
* [amount] to 35 initially 10
* [maAmount] to 35 initially 10
* math:
* volume of Part in L = 349.75
* divide by 50 for units (ratio taken from stock solidBooster RT-10)
* multiple by 5 units per unit for SolidFuel
* = 34.95 units of [SolidFuel]
* Add
* DRAG_CUBE]
* [ModuleCargoPart]
* type = cylinder
* radius = 0.3125 m
* height = 1.14 m
* volume = 0.34975 m³
* m³ x 1000L = 349.78L
* packedVolume = 400
* stackableQuantity = 1
* closes #99 - [taerobee-tinytim.cfg]
# Update Taerobee | ***Taerobee*** | | ***diameter (m)*** | ***height (m)*** | ***width (m)*** | ***math*** | ***radius (m)*** | ***m²*** | ***Liters*** | | :----------------------- | :--------: | -----------------: | ---------------: | --------------: | :----------------: | ---------------: | -------: | -----------: | | taerobee-adapter-short | trunc.cone | 0.625 | 0.1 | 0.15625 | (1/3)πh (r²+rR+R²) | 0.3125 | 0.01790 | 17.9 | | taerobee-adapter-tall | trunc.cone | 0.625 | 0.3 | 0.15625 | (1/3)πh (r²+rR+R²) | 0.3125 | 0.05369 | 53.69 | | taerobee-aerobee | cylinder | 0.625 | 0.43 | | πr²h | 0.3125 | 0.13192 | 131.93 | | taerobee-control | cylinder | 0.625 | 0.1 | | πr²h | 0.3125 | 0.03068 | 30.68 | | taerobee-decoupler | cylinder | 0.625 | 0.19 | | πr²h | 0.3125 | 0.05829 | 58.3 | | taerobee-despin | cylinder | 0.625 | 0.1 | | πr²h | 0.3125 | 0.03068 | 30.68 | | taerobee-fin-large | rectangle | 0.36 | 0.72 | 0.02 | L*H*W | 0.1800 | 0.00518 | 5.19 | | taerobee-fin-small | rectangle | 0.37 | 0.16 | 0.04 | L*H*W | 0.1850 | 0.00237 | 2.37 | | taerobee-nosecone | cone | 0.625 | 0.98 | | (πr²h)/3 | 0.3125 | 0.10022 | 100.23 | | taerobee-parachute | cone | 0.625 | 0.3 | | (πr²h)/3 | 0.3125 | 0.03068 | 30.68 | | taerobee-science | cylinder | 0.625 | 0.3 | | πr²h | 0.3125 | 0.09204 | 92.04 | | taerobee-sustainertank-3 | cylinder | 0.625 | 2.88 | | πr²h | 0.3125 | 0.88357 | 883.58 | | taerobee-tinytim | cylinder | 0.625 | 1.14 | | πr²h | 0.3125 | 0.34975 | 349.75 | * closes #78 - Update Taerobee * [taerobee-adapter-short.cfg] * Create part based on Squad's adapterSmallMiniShort * [rescaleFactor] = 0.5 * [bulkheadProfiles] = size00,size0 * keep variants * add @thumb * Update Localization - <en-us.cfg> * Add * DRAG_CUBE] * [ModuleCargoPart] * type = trunc.cone * radius = 0.3125 m * Radius = 0.15625 m * height = 0.1 m * volume = 0.0179 m³ * m³ x 1000L = 17.9 m³ * packedVolume = 18 * stackableQuantity = 20 * closes #87 - [taerobee-adapter-short.cfg] * [taerobee-adapter-tall.cfg] * Create part based on Squad's adapterSmallMiniTall * [rescaleFactor] = 0.5 * [bulkheadProfiles] = size00,size0 * keep variants * add @thumb * Update Localization - <en-us.cfg> * Add * DRAG_CUBE] * [ModuleCargoPart] * type = trunc.cone * radius = 0.3125 m * Radius = 0.15625 m * height = 0.3 m * volume = 0.05369 m³ * m³ x 1000L = 53.69 m³ * packedVolume = 55 * stackableQuantity = 8 * closes #88 - [taerobee-adapter-tall.cfg] * [taerobee-aerobee.cfg] * rename part cfg to use hyphen * change [bulkheadProfiles] from size0 to size00 * FX randsomed until [ModuleEnginesFX] changed back to [ModuleEngines]; FX returned unharmed * Added [EngineType] = LiquidFuel to [ModuleEngines]] * Add * DRAG_CUBE] * [ModuleCargoPart] * type = cylinder * radius = 0.3125 m * height = 0.43 m * volume = 0.13192 m³ * m³ x 1000L = 131.93 m³ * packedVolume = 150 * stackableQuantity = 5 * closes #89 - [taerobee-aerobee.cfg] * [taerobee-control.cfg] * Rename part cfg to use hyphen * Change [bulkheadProfiles] from size0 to size00 * Change [ModuleCommand] EC consumption from 0.001 to 0.006 re: early tech worse than 0.005 (21.5/h) * Add [ModuleSAS] - no level * Add [ModuleReactionWheel] * PitchTorque = 0.5 * YawTorque = 0.5 * RollTorque = 0.5 * torqueResponseSpeed = 11 * consumes [ElectricCharge] at a rate of 0.01 re: early tech - worse than 0.0003 * Updates[ModuleDataTransmitter] * [packetInterval] set to 1.0, was 0.6 * [packetSize] set to 2, was 1 * [antennaPower] set to 5000, was 50000 * Resource [ElectricCharge] upped to 75, was 5 re: same size as Z-100 but earlier tech and other things in part * Add * DRAG_CUBE] * [ModuleCargoPart] * type = cylinder * radius = 0.3125 m * height = 0.1 m * volume = 0.03068 m³ * m³ x 1000L = 30.68 m³ * packedVolume = 32 * stackableQuantity = 12 * closes #90 - [taerobee-control.cfg] * [taerobee-decoupler.cfg] * rename part cfg to use hyphen * Change [bulkheadProfiles] from size0,srf to size00,srf * Add * DRAG_CUBE] * [ModuleCargoPart] * type = cylinder * radius = 0.3125 m * height = 0.19 m * volume = 0.05829 m³ * m³ x 1000L = 58.3 m³ * packedVolume = 60 * stackableQuantity = 8 * closes #91 - [taerobee-decoupler.cfg] * [taerobee-despin.cfg] * rename part cfg to use hyphen * change [bulkheadProfiles] from size0 to size00 * Resource [MonoPropellant] amount changed to 3.0 from 1.5 * [ModuleSAS] consumption rate updated from 0.05 to 0.25 * Add * DRAG_CUBE] * [ModuleCargoPart] * type = cylinder * radius = 0.3125 m * height = 0.1 m * volume = 0.03068 m³ * m³ x 1000L = 30.68 m³ * packedVolume = 35 * stackableQuantity = 10 * closes #92 - [taerobee-despin.cfg] * [taerobee-fin-large.cfg] * rename part cfg to use hyphen * Add * DRAG_CUBE] * [ModuleCargoPart] * type = rectangle * x = 0.36m * y = 0.72m * z = 0.02m * volume = 0.00518 m³ * m³ x 1000L = 5.19 m³ * packedVolume = 6 * stackableQuantity = 12 * closes #93 - [taerobee-fin-large.cfg] * [taerobee-fin-small.cfg] * rename part cfg to use hyphen * Add * DRAG_CUBE] * [ModuleCargoPart] * type = rectangle * x = 0.37m * y = 0.72m * z = 0.04m * volume = 0.00237 m³ * m³ x 1000L = 2.37 m³ * packedVolume = 3 * stackableQuantity = 20 * closes #94 - [taerobee-fin-small.cfg] * [taerobee-nosecone.cfg] * rename part cfg to use hyphen * change [bulkheadProfiles] from size0 to size00 * Add * DRAG_CUBE] * [ModuleCargoPart] * type = cone * radius = 0.3125 m * height = 0.98 m * volume = .010022 m³ * m³ x 1000L = 100.25 m³ * packedVolume = 125 * stackableQuantity = 4 * closes #95 - [taerobee-nosecone.cfg] * [taerobee-parachute.cfg] * rename part cfg to use hyphen * change [bulkheadProfiles] from size0 to size00 * Updated [attachRules] from 1,0,1,0,0 to 1,0,0,1,0 * Added [buoyancyUseCubeNamed] = PACKED * Added FX * [fx_gasBurst_white] = 0.0, 0.0, 0.0, 0.0, 1.0, 0.0, decouple * [sound_decoupler_fire] = decouple * Updated [maxTemp] from 2000 to 2250 re: prototype * Added [emissiveConstant] = 0.7 * Changed [crashTolerence] from 12 to 8 * Added [preferredStage] = PARACHUTESTAGE * [ModuleParachute] * [clampMinAirPressure] = 0.04 * [deploymentSpeed] set to 0.12 was 1 * [semiDeploymentSpeed] set to 0.5 was 1 * [chuteMaxTemp] = 650 * [ModuleDragModifier] * [dragModifier] set to 1.25 was 1 * [ModuleDecouple] * [ejectionForcePercent] = 100 * [fxGroupName] = decouple * [menuName] = #TBEE-decoup-menu * [stagingEnableText] = #TBEE-decoup-enable * [stagingDisableText] = #TBEE-decoup-disable * Added [ModuleTestSubject], copied from MK1 * Add * DRAG_CUBE] * [ModuleCargoPart] * type = cone * radius = 0.3125 m * height = 0.3 m * volume = 0.03068 m³ * m³ x 1000L = 30.68 m³ * packedVolume = 35 * stackableQuantity = 12 * closes #96 - [taerobee-parachute.cfg] * [taerobee-science.cfg] * rename part cfg to use hyphen * change [bulkheadProfiles] from size0 to size00 * Add * DRAG_CUBE] * [ModuleCargoPart] * type = cylinder * radius = 0.3125 m * height = 0.3 m * volume = 0.09204 m³ * m³ x 1000L = 92.04 m³ * packedVolume = 100 * stackableQuantity = 4 * closes #97 - [taerobee-science.cfg] * [taerobee-sustainertank-3.cfg] * rename part cfg to use hyphen * change [bulkheadProfiles] from size0 to size00 * Add * DRAG_CUBE] * [ModuleCargoPart] * type = cylinder * radius = 0.3125 m * height = 2.88 m * volume = 0.88357 m³ * m³ x 1000L = 883.58 m³ * packedVolume = 900 * stackableQuantity = 1 * closes #98 - [taerobee-sustainertank-3.cfg] * [taerobee-tinytim.cfg] * rename part cfg to use hyphen * change [bulkheadProfiles] from size0 to size00 * FX randsomed until [ModuleEnginesFX] changed back to [ModuleEngines]; FX returned unharmed * Added [EngineType] = SolidBooster to [ModuleEngines] * ADD FX * [fx_exhaustSparks_yellow] = 0.0, -0.17, 0.0, 0.0, 1.0, 0.0, running * [fx_smokeTrail_medium] = 0.0, -0.17, 0.0, 0.0, 1.0, 0.0, running * [sound_explosion_low] = flameout * Adjust [entryCost] = 50 from 0 * Change [category] = Engine from Propulsion * Add [heatConductivity] = 0.06 note: 1/2 default * [skinInternalConductionMult] = 4.0 * [emissiveConstant] = 0.5 note: yes, it's white. But let's claim it's an emissive white... * Change * [maximum_drag] from 0.3 to 0.2 * [crashTolerance] from 8 to 7 * [maxTemp] from 3400 to 2000 * Add [ModuleJettison] * Adjust [SolidFuel] resource * [amount] to 35 initially 10 * [maAmount] to 35 initially 10 * math: * volume of Part in L = 349.75 * divide by 50 for units (ratio taken from stock solidBooster RT-10) * multiple by 5 units per unit for SolidFuel * = 34.95 units of [SolidFuel] * Add * DRAG_CUBE] * [ModuleCargoPart] * type = cylinder * radius = 0.3125 m * height = 1.14 m * volume = 0.34975 m³ * m³ x 1000L = 349.78L * packedVolume = 400 * stackableQuantity = 1 * closes #99 - [taerobee-tinytim.cfg]
make footer one line
zer0Kerbal
changed the title
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
Version 1.4.0.0 - Mexican Waterfalls Adapted
Waterfall Effects
Localization
Lint Compatibility Patches
,StockWaterfallEffectsto the :NEEDSUpdate X1
closes Update X1 #69 - Update X1
[tbee-x1-body]
[tbee-x1-tail]
[tbee-x1-crew]
[tbee-x1-engine]
Update Bumper
closes # Bumper #77 - Update Bumper
[bumper-body.cfg]
[bumper-control.cfg]
[bumper-engine.cfg]
[bumper-engine-unclad.cfg]
[bumper-fin.cfg]
[bumper-nose.cfg]
Update Taerobee
closes # Taerobee #78 - Update Taerobee
[taerobee-adapter-short.cfg]
[taerobee-adapter-tall.cfg]
[taerobee-aerobee.cfg]
[taerobee-control.cfg]
[taerobee-decoupler.cfg]
[taerobee-despin.cfg]
[taerobee-fin-large.cfg]
[taerobee-fin-small.cfg]
[taerobee-nosecone.cfg]
[taerobee-parachute.cfg]
[taerobee-science.cfg]
[taerobee-sustainertank-3.cfg]
[taerobee-tinytim.cfg]