#HUPAN

---

1. Introduction

The human reference genome is still incomplete, especially for those population-specific or individual-specific regions, which may have important functions. It encourages us to build the pan-genome of human population. Previously, our team developed a "map-to-pan" strategy, EUPAN, specific for eukaryotic pan-genome analysis. However, due to the large genome size of individual human genome, EUPAN is not suit for pan-genome analysis involving in hundreds of individual genomes. Here, we present an improved tool, HUPAN (Human Pan-genome Analysis), for human pan-genome analysis.

2. Installation

Requirements

• R 3.1 or later (https://www.r-project.org/)

  R is utilized for visualization and statistical tests in HUPAN toolbox. Please install R first and make sure R and Rscript are under your PATH.

• R packages Several R packages are needed including ggplot2, reshape2 and ape packages. Follow the Installation step,

• or you can install the packages by yourself.

Installation procedures

• Download the HUPAN toolbox from github:

  git clone [email protected]:SJTU-CGM/HUPAN.git

• Alternatively, you also could obtain the toolbox in the HUPAN website;

• Please uncompress the HUPAN toolbox package:

  tar zxvf HUPAN-v**.tar.gz

• Install necessary R packages:

  cd HUPAN & Rscript installRPac

• Compile necessary tools:

  make

  You will find executable files: ccov, bam2cov and hupan et al. in bin/ directory.

• Add bin/ to PATH and add lib/ to LD_LIBRARY_PATH. To do this, add the following text to ~/.bash_profile:

  export PATH=$PATH:/path/to/HUPAN/bin:
  export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:/path/to/HUPAN/lib/:
  export PERL5LIB=$PERL5LIB:/path/to/HUPAN/lib/:
  

• and run:

  source ~/.bash_profile

• Test if HUPAN toolbox is installed successfully: hupan. If you see the following content, congratulations! HUPAN toolbox is successfully installed. If not, see if all the requirements are satisfied or contact the authors for help.

  Usage: hupan ...

   Available commands:
   	qualSta      	View the overall sequencing quality of a large number of files
   	trim         	Trim or filter low-quality reads parallelly
   	alignRead    	Map reads to a reference parallelly
   	sam2bam      	Covert alignments (.sam) to sorted .bam files
   	bamSta       	Statistics of parallel mapping
   	assemble     	Assemble reads parallelly
   	alignContig  	Align assembly results to a referenece parallelly
   	extractSeq   	Extract contigs parallelly
   	assemSta     	Statistics of parallel assembly
   	getUnalnCtg  	Extract the unaligned contigs from nucmer alignment (processed by quast)
   	rmRedundant  	Remove redundant contigs of a fasta file
   	pTpG         	Get the longest transcripts to represent genes
   	geneCov      	Calculate gene body coverage and CDS coverage
   	geneExist    	Determine gene presence-absence based on gene body coverage and CDS coverage
   	subSample    	Select subset of samples from gene PAV profile
   	gFamExist    	Determine gene family presence-absence based on gene presence-absence
   	bam2bed      	Calculate genome region presence-absence from .bam
   	fastaSta     	Calculate statistics of fasta file
   	sim          	Simulation and plot of the pan-genome and the core genome
   	getTaxClass  	Obtain the taxonomic classification of sequences
   	rmCtm        	Detect and discard the potentail contamination
   	blastAlign   	Align sequences to target sequence by blast
   	simSeq       	Simulate and plot the total size of novel sequences
   	splitSeq     	Split sequence file into multiple small size files
   	genePre      	Ab initio gene predict combining with RNA and protein evidence
   	mergeNovGene 	Merge maker result from multiple maker result files
   	filterNovGene	Filter the novel precited genes.
  

3. Main analysis procedures

HUPAN is an advanced version of EUPAN, and most commands are similar to that in EUPAN. Besides, several commands are developed for efficient pan-genome analysis on human genome. Here, we provide the main analysis procedures of human pan-genome analysis on an example data.

We provide three types of tools, which deal with different computing platforms:

1. Single machine version;
2. LSF version (working on supercomputer based on LSF system, in which, "bsub" is used to submit jobs);
3. SLURM version (working on supercomputer based on SLURM system, in which, "sbatch" is used to submit jobs).

Due to the large genome size of individual genome, conducting pan-genome analysis on hudreds of individuals could hardly finish on in single machine. We strongly suggestted the users conduct all the analysis in the supercomputer implemented LSF system or SLURM system. All the commands of hupanLSF and hupanSLURM are same excepted for the way of submit jobs are different. In the following, we give all the exmaples of commands based on SLURM system. If the users work on supercomputer based on LSF system, please replace “hupanSLURM” with “hupanLSF”.

(1) Example data

This data set includes sequencing data of three samples from NA12878. Each sample include 6,000,000 paired-end reads that could map to chromosome 22. Note these are only simple example to help users understand the input data type and data structure and guide run the pipeline. The real data may be much larger and more complex. Please download here and decompress it:

tar zxvf hupanExample.tar.gz & cd hupanExample

And you can find two directories:

data/   The sequencing data with a per-sample-per-directory structure;
ref/    The reference sequence and annotation information (chr22 of GRCh38).

(2) The parallel quality control

The tools FastQC and Trimmomatic are used to view the sequencing quality and trim low-quality reads.

i. The command qualitySta is used to overview qualities:

hupanSLURM  qualSta -f /path/to/Fastqc -t 16 -v PE data/ preview_quality/

Results can be found in the preview_quality/ directory.

ii. If the reads are not so good, the users could trim or filter low-quality reads by the command trim:

hupanSLURM trim data/ trim/ /path/to/Trimmomatic
hupanSLURM trim -w 100 -m 100 data/ filter/ /path/to/Trimmomatic

Results could be found in the trim or filter directory. iii.After trimming or filtration of reads, the sequencing quality should be evaluated again by qualitySta, and if the trimming results are still not good for subsequent analyses, new parameters should be given and the above steps should be conducted for several times.

(3) De novo assembly of individual genomes

To obtain non-reference sequences from each individual genome, we need first to conduct de novo assembly on the raw reads. We provide three distinct strategies:

i.Directly assembly by SOAPDenovo2:

hupanSLURM assemble soapdenovo -t 16 -k 91 data/ assembly_soap/ /path/to/SOAPDenovo2/

Please note that this startegy requires huge memory for assembly an individual human genome (according to our test, finishing the assembly of a human genome of 30-fold sequencing data needs more than 500 Gb memory), we strongly suggested that do not use this command unless the users finish the analysis on the supercomputer with multiple nodes of huge memory.

ii.Assembly by the iterative use of SOAPDenovo2. Not Recommend.

hupanSLURM linearK data assembly_linearK/ /path/to/SOAPDenovo2

iii. Assembly by SGA.

hupanSLURM assemble sga -t 16 data/ assembly_result /path/to/sga/

We recommend the users preform de novo assembly by this command. According to our experience on 185 newly sequenced genomes, the maximum memory consumption in assembling the human genome of 30-fold sequencing data is about 60Gb.

(4) Extract non-reference sequences from assembled contigs

i. In order to obtain the non-reference sequence from each individual genome, the assembled contigs are aligned to the reference genome with nucmer tool within Mummer package:

hupanSLURM alignContig assembly_result/data/ aligned_result	 /path/to/MUMmer/ /path/to/reference.fa

ii. Then the contigs those are highly similar with the reference genome are discarded and the remaining contigs are considered as candidate non-reference sequences:

hupanSLURM extractSeq assembly_result/data/ candidate aligned_result

iii. All the candidate non-reference sequences are assessed by QUAST to obtain non-reference sequences:

hupanSLURM assemSta candidate/data/ quast_result /path/to/quast-4.5/ /path/to/reference.fa

iv. Two types of non-reference sequences, fully unaligned sequences and partially unaligned sequences, for each individual could be collected:

hupanSLURM getUnalnCtg -p .contig candidate/data/ quast_result/data/ Unalign_result

v. Non-reference sequences from multiple individuals are merged:

hupanSLURM mergeUnalnCtg Unalign_result/data/ mergeUnalnCtg_result

(5) Remove redundancy and potential commination sequences

After obtaining the non-reference sequences from multiple individuals, redundant sequences between different individuals should be excluded, and the potential commination sequences from non-human species are also removed for further analysis.

i. The step of remove redundancy sequences is conducted by CDHIT for fully unaligned sequences and partially unaligned sequences, respectively:

hupanSLURM rmRedundant cdhitCluster  mergeUnalnCtg_result/total.fully.fa rmRedundant.fully.unaligned /path/to/cdhit/
hupanSLURM rmRedundant cdhitCluster mergeUnalnCtg_result/total.partilly.fa rmRedundant.partially.unaligned /path/to/cd-hit/

ii. Then the non-redundant sequences are aligned to NCBI’s non-redundant nucleotide database by BLAST:

hupanSLURM blastAlign blast rmRedundant rmRedundant_blast /path/to/nt /path/to/blast

iii. According to the alignment result, the taxonomic classification of each sequences (if have) could be obtained:

hupanSLURM getTaxClass rmRedundant_blast/ data/fully/fully.non-redundant.blast info/ TaxClass_fully
hupanSLURM getTaxClass rmRedundant_blast/ data/partially/partially.non-redundant.blast info/ TaxClass_partially

iv. And the sequences classifying as microbiology and non-primate eukaryotes are considered as non-human sequences and removed from further consideration:

hupanSLURM rmCtm -i 60 rmRedundant/fully/fully.non-redundant.fa rmRedundant_blast/data/fully/fully.non-redundant.blast TaxClass_fully/data/accession.name rmCtm_fully
hupanSLURM rmCtm -i 60 rmRedundant/partially/partially.non-redundant.fa rmRedundant_blast/data/partially/partially.non-redundant.blast TaxClass_partially/data/accession.name rmCtm_partially

(6) Construction and annotation of pan-genome

i. The non-redundant sequences of fully unaligned sequences and partially unaligned sequences are merged and further clustered to remove redundant sequences:

mkdir Nonreference
cat rmCtm_fully/data/novel_sequence.fa rmCtm_partially/data/novel_sequence.fa > Nonreference/nonrefernce.before.fa
hupanSLURM rmRedundant cdhitCluster Nonreference/nonrefernce.before.fa NonredundantNonreference /path/to/cdhit/

ii. And the resulted sequences together with the human reference genome construct the pan-genome sequences. The annotation of reference genome could be directly download from GenCODE or other common used annotation dataset. The annotation information of non-reference sequences is predicted by MAKER.In general, the size of non-reference sequences is large and the procedure of gene prediction is slow. We recommend the users to split the file of non-reference sequences into multiple small files and predict novel genes in parallel:

hupanSLURM splitSeq NonredundantNonreference/non-redundant.fa GenePre_input
hupanSLURM genePre GenePre_input GenePre /path/to/maker/config_file /path/to/maker

iii. Then after all procedures are finished, the outcomes are merged:

hupanSLURM mergeNovGene GenePre GenePre_merge /path/to/maker

iv. The new predicted genes may be highly similar to the genes that are located in reference genome, and additional filtering step should be conducted to ensure the novelty of predicted gene:

hupanSLURM filterNovGen GenePre_merge GenePre_filter /path/to/reference/ /path/to/blast /path/to/cdhit /path/to/RepeatMask

v. The annotation of pan-genome sequences is simply merged to obtain by combine two annotation files:

 hupanSLURM pTpG ref/ref.gtf ref/ref-ptpg.gtf
 cat ref/ref-ptpg.gtf non-reference.gtf >pan/pan.gtf

(7) PAV analysis

The “map-to_pan” strategy is utilized to determine gene presence-absence.

i. The raw reads are mapped to pan-genome sequences by Bowtie2:

  cd pan & /path/to/bowtie2/bowtie2-build pan.fa pan &cd ..
  hupanSLURM alignRead –f bowtie2 data/ map2pam /path/to/bowtie2 pan/pan

ii. The result of .sam should be converted to .bam and sorted and indexed use Samtools:

hupanSLURM sam2bam map2pan/data panBam /path/to/samtools

iii. Then the gene body coverage and the cds coverage of each gene are calculated:

  hupanSLURM geneCov panBam/data geneCov/ pan/pan.gtf

iv. Finally, the gene presence-absence is determined by the threshold of cds coverage as 95%:

  mkdir geneExist & hupanSLURM geneExist geneCov/summary_gene.cov geneCov/summary_cds.cov 0 0.95 >geneExist/gene.exist

(8) Bugs or suggestions

Any bugs or suggestions, please contact the authors.