3d-printer.md

3D Printer Guide

Dremel Digilab 3D45

Documents/使用文档

• FAQs/常见问题：https://us.dremel.com/digilab/sites/default/files/3d%20faqs.pdf
• Quick Start/快速上手：https://us.dremel.com/digilab/sites/default/files/quick%20start%20guide%203d45.pdf
• Manual/说明书：https://us.dremel.com/digilab/sites/default/files/manual%20-%202610047405ac%2006-20%203d45_1.pdf

Slicer/切片软件

• 切片软件下载：地址1 地址2
• Windows/Mac切片教程：https://3pitech.com/pages/desktop-slicer-software
• 云端切片教程：https://3pitech.com/pages/cloud-slicer-software

Dremel的软件和打印机还是比较人性的，基本按照上面的说明就可顺畅使用。

Model Library/模型库

• Thingiverse: https://www.thingiverse.com/
• Printables https://www.printables.com/
• SketchFab the british museum https://sketchfab.com/britishmuseum

FAQ

底盘翘起来了

把底床温度调到60度可以提高成功率。原因是底盘太冷导致材料收缩。

打出来的材料有些地方变色（比如白色变成黄色）

可以调低10度。原因是喷嘴温度过高烧焦了材料。

Auto-leveling is not working, causing the nozzle to be too close to the build plate. 自动调平功能失效，导致喷嘴离底板太近。

There are screws on the bottom of the bed that can be adjusted to raise or lower the bed. You can also use the paper hack: Put a piece of paper on the build plate. When the print starts and runs the auto-leveling, the additional thickness of the paper will correct the auto-leveling. Once auto-leveling is finished, take the paper away before the actual printing starts. 可以用底床底部的调整螺丝来调节高度。或者用一个纸片调平的技巧：在底床上放一张纸，打印开始时会进行自动调平，纸片会增加底床的厚度，从而避免喷嘴太近。注意自动调平结束后把纸片取走。

Thanks Johannes Wewetzer for the paper hack.