Skip to content

ESPBug is a rogue captive portal program which runs on the ESP8266 dev board, such as the NodeMCU (clones included). It is a social engennering tool which generates a WiFi network of a given name alluring people to connect to it and enter some credentials.

License

Notifications You must be signed in to change notification settings

wlwatkins/ESPBug

Repository files navigation

A New restructured project was created at https://github.com/guanicoe/ESPBug_PIO using plateformio to ease up in the dev. The project will be reformets, not sure yet where i want continue it

ESPBug

ESPBug is a rogue captive portal program which runs on the ESP8266 dev board, such as the NodeMCU (clones included). It is a social engennering tool which generates a WiFi network of a given name alluring people to connect to it and enter some credential.

When give something back?

BTC : bc1qlvancn33z0l477gshnnp8yjmujn4zxxrctmlnw if you ever want to send a thanks my way, you can send some btc.

DISCLAIMER

The source code given in this public repo is for educational use only. Stealing credential might be illegal depending on where you live. I am not liable for any actions on your behalf. This code is given with no warranties and liabilities. Just be responsible OK?

Some updates about the project

Life being as it is, I was not able to work on this project at all for the last 8 months, and maybe won't be able to for the next few. The project is not dead though, I am just unable to work on it now. Some issues have been submitted regarding the language.h library not being detected. I cannot say with certainty why that is, but if I remember it's just a question of checking your path. I hope to be able to come back to this project as soon as possible, thanks for your understanding.

Demonstration & How tos

Pocket board for phishing passwords - ESPBUG

Here are a few screenshots from my phone showing off the web interface, and what each settings do. The fist image is an example of a captive portal seen by the victim. Would you enter you password?

Imgur0 Imgur1

When you connect to the ESPBug, go to any domain name and to the espportal page (e.g. http://espbug.com/espportal) You should be shown a pop up window asking you for the password. Defaults are Username: espbug and Password: password. From there you are redirected to the home page.

Imgur2 Imgur3

You want to go to the settings to prepare the hook. Let's go through all the settings to understand what they do.

Imgur4 Imgur5

  • Hat colour (choices: Black Hat or White Hat): This gives you the object to be an arse or a crap arse. Basically the White Hat option redirects the victim to a webpage telling them what just happened and how to protect themselves against phishing attacks. The Black Hat immediately disconnects after the victim entered their credentials.

  • Enable portal (choices: ON or OFF): Basically enables the phishing portal.

  • SSID: Set up the SSID of the device. By default it is espbug. When a phishing attack occured, it defaults back to this name so you can connect and see the logs. You can name it what you want to lure victims.

  • Password: This is the WiFi's password. By default it is password, however, you want this blank when you are carrying an attack so victims can connect to the WiFi. Again, when an attack as succesfully happened, the password defaults back to password. You can change these defalts in the source code - might add the option to change that in the settings if you ask for it.

  • Channel (choices: 1 to 14): This is the WiFi channel on the 2.4GHz so from 1 to 14.

  • Hidden (choices: YES or NO): This is important! By default, the WiFi is hidden, that means to connect to the espbug you must manually enter the ssid and password. When an attack occured, the WiFi is hidden again, so you should connect to the device automatically with the same station. However, during an attack you want the WiFi to be visible, so set this to NO.

  • IP: This is the IP of the espbug. By default you can leave the 192.168.1.1. However during an attack you might want to switch to 8.8.8.8. This enables the victim's device to automatically show the sign up screen when they connect to the WiFi.

  • GateWay: Same as IP, keep these values the same.

  • Subnet: Do not change if you don't know what you're doing.

  • Username: Default is espbug. Put what you want. This is the username to enter when you connect to the webpage. To access the settings etc...

  • Password: Default is password. As the Username. Put what you want here.

  • FTP: STILL UNDER DEV., commented out for the moment

Installation

You should be able to download the binary from the release tab in github. https://github.com/willmendil/ESPBug/releases/tag/0.1 and just updload the binary through the arduino IDE. Look below to see how to setup the board.

From source

To get this code running on a nodeMCU like board - such as the one illustrated below - you need to install the Arduino IDE (! I have only tried on Linux, but this should work on any OS - virtual machine included).

esp8266 image

Download and install

From there you need a couple installations clicking the upload button. First got File -> Preferences. At the bottom of the window, you should see Additional Boards Manager URLS. Click the little icon at the end at the end of that line. A new window should show up asking you to Enter additional URLS, one for each row. Add:

https://arduino.esp8266.com/stable/package_esp8266com_index.json

and click OK.

Next, in library manager (Sketch -> Include Library -> Manage Libraries) search for

ArduinoJson

From Benoit Blanchon. YOU MUST INSTALL VERSION 5.13.5 not version 6.

nearly there

Now you only need to install the board. Tools -> Board: "<SOME BOARD NAME>" -> Boards Manager. In the search bar, type

esp8266

by ESP8266 Community. I installed version 2.5.5 2.6.0.

And YOU ARE DONE! Now, you need to open the espbug.ino and setup the correct parameters for the board.

Here are MY setup parameters

Board: "NodeMCU 1.0 (ESP-12E Module)"
Upload Speed: "115200"
CPU Frequency: "160 MHz"
Flash Size: "4M (FS:3MB OTA:~512KB)"
Debug port: "Disabled"
Debug Level: "None"
IwIP Variant: "v2 Lower Memory"
VTables: "Flash"
Exceptions: "Disabled (new can abort)"
Erase Flash: "All Flash Contents"
SSL Support: "All SSL ciphers (most compatible)"
Port : "<USB PORT>"

Convert webpages

you can look at this video for quick demo https://youtu.be/1cIXfD_Jz5s

The web pages are saved in a compress form and in bytes. A small script is available to convert you website into the correct format. this runs in Python3. In the web_converter you must add your web pages in web_pages:

\web_converter>tree /F
Folder PATH listing for volume HDD
Volume serial number is 5E0C-E860
D:.
│   requirements.txt
│   webConverter.py
│
├───css_html_js_minify
│   │   [...]
│
└───web_pages
        example.html

Then you just need to run the python script knowing that anglerfish must be installed (python -m pip install anglerfish).

\web_converter>PYTHON webConverter.py

webConverter for master

p <PATH TO>\ESPBug\web_converter
parent <PATH TO>
q compressed
arduino_file_path <PATH TO>\ESPBug\web_converter\webfiles.h
datadir <PATH TO>\ESPBug\web_converter\web_pages
dir <PATH TO>\web_interface
datadir <PATH TO>\ESPBug\web_converter\web_pages
compressed <PATH TO>\ESPBug\web_converter\web_pages\compressed
filelist []
html_files [WindowsPath('<PATH TO>ESPBug/web_converter/web_pages/example.html')]
css_files []
js_files []
[+] Minifying example.html...
[+] Compressing example.html...
[+] Saving everything into webfiles.h...

[+] Done, happy uploading :)
Here are the updated functions

server.on(String(F("/example.html")).c_str(), HTTP_GET, [](){
  sendProgmem(examplehtml, sizeof(examplehtml), W_HTML);
});

This is the ouput, not very pretty, but functionnal. (I replaced the exact path to <PATH TO> for privacy). There is the code that must be added to the void startAP() function in servingWebPages.h. The string F("/example.html") is actually the url path that needs to be called to serve the page. You can therefore put anything you want here.

If we look at the tree we see new stuff now

\web_converter>tree /F
Folder PATH listing for volume HDD
Volume serial number is 5E0C-E860
D:.
│   requirements.txt
│   webConverter.py
│   webfiles.h
│
├───css_html_js_minify
│   │   [...]
│
└───web_pages
    │   example.html
    │
    └───compressed
            example.html.gz

Specifically a compressed folder was created in web_pages. You actually need to move everything in web_converter\web_pages inside the espbug folder were the espbug.ino resides.

\ESPBug>tree
Folder PATH listing for volume HDD
Volume serial number is 5E0C-E860
D:.
├───espbug
│   └───web_pages      <---- [In this folder]
│       ├───compressed              |
│       │   └───js                  |
│       ├───jade                    |
│       └───json                    |
└───web_converter                   |
    ├───css_html_js_minify          |
    └───web_pages       [MOVE THIS  |]
        └───compressed

Then you'll need to recompile the project and upload it to the board. I know, it's not elegante, but it works.

CREDITS where credit is due

Most of the code is strongly inspired by different repo from github, I just wanted to mention them here.

Todos

  • Have FTP Working
  • Make more captive portal HTML pages

Known bugs

  • In white Hat mode, the explanation page is closed automatically when using 8.8.8.8. Don't know yet how this can be fixed
  • There might be an issue with the IPs showing from the connected devices, they are all identical and sometimes erroneous.

License

GNU GENERAL PUBLIC LICENSE

Free Software, Hell Yeah!

About

ESPBug is a rogue captive portal program which runs on the ESP8266 dev board, such as the NodeMCU (clones included). It is a social engennering tool which generates a WiFi network of a given name alluring people to connect to it and enter some credentials.

Resources

License

Stars

Watchers

Forks

Packages

No packages published