WIFI module Micronova Agua Navel 2.0 STD in combination with Nest thermostat

[menvis]

I have a WIFI module Micronova Agua Navel 2.0 STD in combination with a pellet stove. It works fine in combination with my Home Assistant with one exception. It takes over the control of my Nest thermostat while it indicates that the "room temperature is 0 C", while according to the Nest thermostat it is 18 C. Apparently it does not use the signal from the thermostat. How do I ensure that my Nest thermostat continues to control it, while the module does pass on all technical data to Home Assistant?

[vincentwolsink]

Hi! This integration should not (cannot) take over control from your stove thermostat. On most stoves the external thermostat is just an on/off input, which means the stove cannot read the temperature from the thermostat thats why it is shown as 0. I don't fully understand what is happening in your case. Could you maybe send the diagnostics file for the integration while it is showing the described behaviour?

[menvis]

Thank you. I have tested again and you are right.

[menvis]

The Air Temperature is o,o C. How can I read out the real temperature according to my thermostat?