Microbit Makecode block for Adafruit Motor Driver Board.
- Add a reference for your blocks here
- Add "icon.png" image (300x200) in the root folder
- Add "- beta" to the GitHub project description if you are still iterating it.
- Turn on your automated build on https://travis-ci.org
- Use "pxt bump" to create a tagged release on GitHub
- Get your package reviewed and approved https://makecode.microbit.org/packages/approval
Read more at https://makecode.microbit.org/packages/build-your-own
| MDB PIN NAME | MDB PIN NUMBER | MICROBIT PIN NUMBER | MICROBIT PIN NAME | COMMENT |
|---|---|---|---|---|
| Ground | GND1 | GND | ||
| Power | 5V | 3V | Powered by micro:bit | |
| DIR_LATCH | D12 | P16 | GPIO | |
| DIR_SER | D08 | P15 | SPI (MOSI) | |
| - | - | P14 | SPI (MISO) | Not connected |
| DIR_CLK | D04 | P13 | SPI (SCK) | |
| DIR_EN | D07 | P08 | GPIO | |
| PWM2A | D11 | P00 | PWM | Motor 1 speed |
| PWM2B | D03 | P01 | PWM | Motor 2 speed |
| PWM0A | D06 | P02 | PWM | Motor 3 speed |
| PWM0B | D05 | - | - | Motor 4 - no speed control |
- PWR Jumper removed
- 9V Battery connected per schematic
- DC motors connected per schematic
- MDB Logic section is powered by micro:bit
- Supports only DC motors, no support for stepper and servo motors
- Speed control available only for 3 motors, 4th motor has only direction control
MIT License
- Adafruit Motor Driver Board Schematic
- Adafruit Motor Shield Lecture - Part1
- Adafruit Motor Shield Lecture - Part2
- Kitronik Motor Driver Block
- for PXT/microbit (The metadata above is needed for package search.)