-
-
Notifications
You must be signed in to change notification settings - Fork 4
Home
Welcome to the linuxmotehook2 wiki!
Config files of linuxmotehook2 follow INI-like structure. They may include [Linuxmotehook] section for global settings and per-wiimote sections, either empty or with overrides. Please note that wiimotes not in config file won't be served! This is done to allow for more complex setups with few motion servers running at once to bypass 4 device limit of DSU protocol.
All values have reasonable defaults, so it's advised to avoid setting them unless you know what you're doing. As such, your hand-written config file will probably look something like this:
# Global section
[Linuxmotehook]
Orientation=sideways-left
# Per-wiimote sections, empty in this case
[0xB8AE6EBACCC7]
[0xB8AE6EBADEC3]
See also example config for an example of config that uses all available features.
Port to run server on. Default is 26760, which is what DSU protocol typically uses.
Describes how motion should be transformed before passing it on. Valid values are
-
normal- no transformations are applied. Default value. Perfect when game expects you to actually be using wiimote. Also matches all left joycon orientations and non-sideways right joycon. -
sideways-left- use when game expects you to have "normal" controller and you're holding wiimote sideways (e.g. switch's handheld/procon, Citra, Wii U's gamepad, etc.). -
sideways-right- practically speaking, probably not useful with this motion server. -
inverted- useful in a rare case when game expects sideways right joycon and you're holding wiimote sideways too.
Boolean, telling whether or not to send button presses as well as motion data. Defaults to false to encourage users to configure button presses directly from evdev/SDL (which has somewhat lower latency), but can be enabled if doing so is problematic for one reason or another. This also applies to buttons on extensions!
How quickly to account for motionplus's gyro drift. Best left untouched at default value of 50.
Per-wiimote overrides of corresponding global settings.
Default gyroscope calibration. Should be fine unset these days thanks to auto-calibration controlled via GyroNormalizationFactor.
NunchuckStickCalibration, ClassicControllerStickCalibration, ProControllerStickCalibration are responsible for calibration of sticks of their respective extensions. They typically should not be set manually.