Skip to content

Latest commit

 

History

History
182 lines (108 loc) · 7.17 KB

README.md

File metadata and controls

182 lines (108 loc) · 7.17 KB
Raw

Pusher gem

Build Status

Installation & Configuration

Add pusher to your Gemfile, and then run bundle install

gem 'pusher'

or install via gem

gem install pusher

After registering at http://pusher.com configure your app with the security credentials.

Global

The most standard way of configuring Pusher is to do it globally on the Pusher class.

Pusher.app_id = 'your-pusher-app-id'
Pusher.key = 'your-pusher-key'
Pusher.secret = 'your-pusher-secret'

Global configuration will automatically be set from the PUSHER_URL environment variable if it exists. This should be in the form http://KEY:[email protected]/apps/APP_ID. On Heroku this environment variable will already be set.

If you need to make requests via a HTTP proxy then it can be configured

Pusher.http_proxy = 'http://(user):(password)@(host):(port)'

By default API requests are made over HTTP. HTTPS can be used by setting

Pusher.encrypted = true

As of version 0.12, SSL certificates are verified when using the synchronous http client. If you need to disable this behaviour for any reason use:

Pusher.default_client.sync_http_client.ssl_config.verify_mode = OpenSSL::SSL::VERIFY_NONE

Instantiating a Pusher client

Sometimes you may have multiple sets of API keys, or want different configuration in different parts of your application. In these scenarios, a pusher client may be configured:

pusher_client = Pusher::Client.new({
  app_id: 'your-pusher-app-id',
  key: 'your-pusher-key',
  secret: 'your-pusher-secret'
})

This client will have all the functionality listed on the main Pusher class (which proxies to a client internally).

Interacting with the Pusher service

The Pusher gem contains a number of helpers for interacting with the service. As a general rule, the library adheres to a set of conventions that we have aimed to make universal.

Handling errors

Handle errors by rescuing Pusher::Error (all errors are descendants of this error)

begin
  Pusher.trigger('a_channel', 'an_event', {:some => 'data'})
rescue Pusher::Error => e
  # (Pusher::AuthenticationError, Pusher::HTTPError, or Pusher::Error)
end

Logging

Errors are logged to Pusher.logger. It will by default log at info level to STDOUT using Logger from the standard library, however you can assign any logger:

Pusher.logger = Rails.logger

Publishing events

An event can be published to one or more channels (limited to 10) in one API call:

Pusher.trigger('channel', 'event', {foo: 'bar'})
Pusher.trigger(['channel_1', 'channel_2'], 'event_name', {foo: 'bar'})

An optional fourth argument may be used to send additional parameters to the API, for example to exclude a single connection from receiving the event.

Pusher.trigger('channel', 'event', {foo: 'bar'}, {socket_id: '123.456'})

Deprecated publisher API

Most examples and documentation will refer to the following syntax for triggering an event:

Pusher['a_channel'].trigger('an_event', {:some => 'data'})

This will continue to work, but has been replaced by Pusher.trigger which supports one or multiple channels.

Generic requests to the Pusher REST API

Aside from triggering events, the REST API also supports a number of operations for querying the state of the system. A reference of the available methods is available at http://pusher.com/docs/rest_api.

All requests must be signed by using your secret key, which is handled automatically using these methods:

# using the Pusher class
Pusher.get('url_without_app_id', params)

# using a client
pusher_client.post('url_without_app_id', params)

Note that you don't need to specify your app_id in the URL, as this is inferred from your credentials.

Asynchronous requests

There are two main reasons for using the _async methods:

  • In a web application where the response from Pusher is not used, but you'd like to avoid a blocking call in the request-response cycle
  • Your application is running in an event loop and you need to avoid blocking the reactor

Asynchronous calls are supported either by using an event loop (eventmachine, preferred), or via a thread.

The following methods are available (in each case the calling iterface matches the non-async version):

  • Pusher.get_async
  • Pusher.post_async
  • Pusher.trigger_async

It is of course also possible to make calls to pusher via a job queue. This approach is recommended if you're sending a large number of events to pusher.

With eventmachine

  • Add the em-http-request gem to your Gemfile (it's not a gem dependency).
  • Run the eventmachine reactor (either using EM.run or by running inside an evented server such as Thin).

The _async methods return an EM::Deferrable which you can bind callbacks to:

Pusher.get_async("/channels").callback { |response|
  # use reponse[:channels]
}.errback { |error|
  # error is an instance of Pusher::Error
}

A HTTP error or an error response from pusher will cause the errback to be called with an appropriate error object.

Without eventmachine

If the eventmachine reactor is not running, async requests will be made using threads (managed by the httpclient gem).

An HTTPClient::Connection object is returned immediately which can be interrogated to discover the status of the request. The usual response checking and processing is not done when the request completes, and frankly this method is most useful when you're not interested in waiting for the response.

Authenticating subscription requests

It's possible to use the gem to authenticate subscription requests to private or presence channels. The authenticate method is available on a channel object for this purpose and returns a JSON object that can be returned to the client that made the request. More information on this authentication scheme can be found in the docs on http://pusher.com

Private channels

Pusher['private-my_channel'].authenticate(params[:socket_id])

Presence channels

These work in a very similar way, but require a unique identifier for the user being authenticated, and optionally some attributes that are provided to clients via presence events:

Pusher['presence-my_channel'].authenticate(params[:socket_id], {
  user_id: 'user_id',
  user_info: {} # optional
})

Receiving WebHooks

A WebHook object may be created to validate received WebHooks against your app credentials, and to extract events. It should be created with the Rack::Request object (available as request in Rails controllers or Sinatra handlers for example).

webhook = Pusher.webhook(request)
if webhook.valid?
  webhook.events.each do |event|
    case event["name"]
    when 'channel_occupied'
      puts "Channel occupied: #{event["channel"]}"
    when 'channel_vacated'
      puts "Channel vacated: #{event["channel"]}"
    end
  end
  render text: 'ok'
else
  render text: 'invalid', status: 401
end