Skip to content

Latest commit

 

History

History
19 lines (16 loc) · 1.3 KB

TODO.md

File metadata and controls

19 lines (16 loc) · 1.3 KB
Raw

To Do List

JAG 02/19/2012 2202 EST (GMT-0500)

  1. Have others at forum.diyefi.org check the schematics. IN PROGESS, at Revision A.3 02/19/2012
  2. Have others at forum.diyefi.org check the component choices and BOM. IN PROGRESS, at Revision A.3 02/19/2012
  3. Double check to make sure everything is good with the board layout. IN PROGRESS, at Revision A.3 02/19/2012
  4. Check that the chosen TE Connectivity automotive grade connectors will work for this design. DONE 02/09/2012
  5. Update Bill of Materials. DONE 02/03/2012
  6. Order Samples from SAMTEC for Water-Resistent USB connectors for case. RECEIVED 02/17/2012
  7. Order components not already on hand. NEED TO ORDER OPTOCOUPLERS
  8. Create Assembly documentation. IN PROGRESS, repo on github as of 02/19/2012 for peer review.
  9. Print out proof sheets onto paper to check component spacing. DONE 02/19/2012
  10. Print out photo sheets to photo-etch a prototype board. DONE 02/19/2012
  11. Test prototype board after etching. DONE, good etch, pads and traces look good.
  12. Assemble prototype board. DONE 02/19/2012 WILL TEST OPTOCOUPLERS WHEN THEY ARRIVE
  13. Bench test assembled board. DONE 02/19/2012, I/O works, Awaiting firmware code for RPM inputs and Ignition outputs.
  14. Connect Jaguar board to my engine with a rough tune and try it out!