Skip to content

Latest commit

 

History

History
257 lines (160 loc) · 12.7 KB

install_debian.rst

File metadata and controls

257 lines (160 loc) · 12.7 KB

Bundle Installation on Debian

perfSONAR combines various sets of measurement tools and services. For perfSONAR 5.0 we provide the whole perfSONAR toolkit as Debian packages for six different architectures. This should enable you to deploy a full perfSONAR node on one of the following distributions:

  • Debian 10 Buster
  • Ubuntu 18 Bionic Beaver
  • Ubuntu 20 Focal Fossa

Debian meta packages are available to install the bundles described in :doc:`install_options`. The perfsonar-archive package can also be installed on Debian 11 and Ubuntu 22.

The remaining sections of this document detail the steps required for installing these bundles.

System Requirements

  • Architecture: We provide Debian packages for 4 different architectures:
    • 64-bit (amd64)
    • ARMv7 and up (armhf)
    • ARM64 (arm64)
    • PPC64 (ppc64el)
  • Operating System: Any system running a Debian 10, Ubuntu 18 or 20 server OS is supported. Other Debian flavours derived from Debian 10, Ubuntu 18 or 20 might work too but are not officially supported.
  • See :doc:`install_hardware` for hardware requirements and more.

Note

Installing a graphical/desktop environment with perfSONAR is not supported. These environments generally come with a Network Manager that conflicts with the way that perfSONAR is tuning the network interface parameters. We recommend doing only server grade OS installs.

Installation

Step 1: Configure APT

All you need to do is to configure the perfSONAR Debian repository source, along with our signing key, on your Debian/Ubuntu machine. You will need to follow the steps below as privileged user:

cd /etc/apt/sources.list.d/
curl -o perfsonar-release.list http://downloads.perfsonar.net/debian/perfsonar-release.list
curl http://downloads.perfsonar.net/debian/perfsonar-official.gpg.key | apt-key add -
  • Ubuntu only. Additionnaly, if you're running a stripped down Ubuntu installation, you might need to enable the universe repository. This is done with the following command:

    add-apt-repository universe
    

Then refresh the packages list so APT knows about the perfSONAR packages:

apt update

Step 2: Install a Bundle

Choose one of the following bundles and see :doc:`install_options` page for more information about what these bundles are.

  • perfSONAR Tools:

    apt install perfsonar-tools
    
  • perfSONAR Test Point:

    apt install perfsonar-testpoint
    

    During the installation process, you'll be asked to choose a password for the pscheduler database.

  • perfSONAR Core:

    apt install perfsonar-core
    

    During the installation process, you'll be asked to choose a password for the pscheduler database.

  • perfSONAR Archive:

    apt install perfsonar-archive
    

    During the installation process, you'll be asked to choose a password for the pscheduler database.

  • perfSONAR Toolkit:

    apt install perfsonar-toolkit
    

    During the installation process, you'll be asked to choose a password for the pscheduler database.

Note

The perfsonar-archive bundle is also supported on Debian 11 and Ubuntu 22.

Optional Packages

In addition to any of the bundles above you may also optionally choose to install one or more of our add-on packages (these are automatically added on the perfsonar-toolkit bundle):

  • apt install perfsonar-toolkit-ntp - Automatically detects closest NTP servers and sets them in ntp.conf
  • apt install perfsonar-toolkit-security - Adds default firewall rules and installs fail2ban
  • apt install perfsonar-toolkit-servicewatcher - Adds a cron job that checks if services are still running
  • apt install perfsonar-toolkit-sysctl - Adds default sysctl tuning settings
  • apt install perfsonar-toolkit-systemenv-testpoint - Configures auto-update and set some default logging locations

Reducing installation size

If you want to reduce the perfSONAR installation size as much as possible, you can call apt with the --no-install-recommends option. This will prevent Debian recommended packages to be automatically installed (you can also configure this globaly in the APT configuration files with the statement APT::Install-Recommends "0";). This can become useful when you want to install the perfsonar-testpoint bundle with the less overhead possible.

Step 3: Verify NTP and Tuning Parameters

Step 3 can be ignored for perfsonar-toolkit package installation as its instructions are included and run automatically

  • NTP Tuning

    • Auto-select NTP servers based on proximity

      The Network Time Protocol (NTP) is required by the tools in order to obtain accurate measurements. Some of the tools such as OWAMP will give correct results unless NTP is running. If the optional package perfsonar-toolkit-ntp was installed this has already been done for you, but if you want to re-run manually:

      /usr/lib/perfsonar/scripts/configure_ntpd new
      service ntp restart
      

    You can also configure your own set of NTP servers if you want.

    You can verify if NTP is running with the following command:

    /usr/sbin/ntpq -p
    
  • System Tuning

    It is important to make sure that your host is properly tuned for maximum TCP performance on the WAN. You should verify that htcp, not reno, is the default TCP congestion control algorithm, and that the maximum TCP buffers are big enough for your paths of interest.

    If you have installed the perfsonar-toolkit-sysctl package, all should be ready for you, but if you want to rerun manually:

    /usr/lib/perfsonar/scripts/configure_sysctl
    

    Please refer to linux host tuning for more information.

Step 4: Firewall and Security Considerations

If you have installed the perfsonar-toolkit-security package, then your iptables are already configured with our default rules. The package also installs fail2ban.

If you would like to configure the rules manually, then please review the document here on the ports that need to be open.

The perfsonar-toolkit-security package uses firewalld to manage the firewall rules.

Additionally, pscheduler allows you to limit the parameters of tests such as duration and bandwidth based on the requesters IP address. It does this through the file pscheduler/limits.conf. ESnet provides a file containing all R&E subnets, which is updated nightly. Instructions on how to download this file and configure pScheduler to use it are described on the page :doc:`manage_limits`.

Note that the perfsonar-toolkit-security package is automatically included in the perfsonar-toolkit bundle.

Step 5: Auto updates

If you have installed the perfsonar-toolkit-systemenv-testpoint package, then you're all set for the auto-updates of perfSONAR packages and security fix for your OS.

To ensure you always have the most current and hopefully most secure packages you can install unattended-upgrades. You’ll need to configure it to actually install the available updates with the following commands:

apt install unattended-upgrades
echo 'APT::Periodic::Update-Package-Lists "1";' > /etc/apt/apt.conf.d/60unattended-upgrades-perfsonar
echo 'APT::Periodic::Unattended-Upgrade "1";' >> /etc/apt/apt.conf.d/60unattended-upgrades-perfsonar
echo 'APT::Periodic::AutocleanInterval "31";' >> /etc/apt/apt.conf.d/60unattended-upgrades-perfsonar
echo 'Unattended-Upgrade::Origins-Pattern:: "origin=perfSONAR";' >> /etc/apt/apt.conf.d/60unattended-upgrades-perfsonar

A cronjob will automatically install security updates from Debian/Ubuntu and new packages present in the perfsonar release repository every night. A trace of all updates applied will be stored in /var/log/unattended-upgrades/unattended-upgrades.log.

Full perfSONAR toolkit upgrades (i.e. upgrade to new major versions) might still need a manual intervention to properly conclude, but we will then announce that through our usual communication channels.

Note

Automatic updates are enabled by default in the perfSONAR Toolkit.

Step 6: Service Watcher

The perfsonar-toolkit-servicewatcher installs scripts that check if pscheduler, owamp, databases and other processes are running and restarts if they have stopped unexpectedly.

The install automatically configures cron to run the service_watcher regularly.

To run the script manually, run:

/usr/lib/perfsonar/scripts/service_watcher

Step 7: Register your services

Note: this step can be done through the web interface if the perfsonar-toolkit bundle was installed. See :doc:`manage_admin_info`.

No actual configuration is required but filling fields such as administrator_email, site_name, city, country, latitude, longitude, etc. are highly recommended. You can add these by removing the leading # of any property and filling it out with a proper value for your host. Changes will be picked-up automatically without need for any restarts.

Step 8: Starting your services

You can start all the services by rebooting the host since all are configured to run by default. In order to check services status issue the following commands:

service pscheduler-scheduler status
service pscheduler-runner status
service pscheduler-archiver status
service pscheduler-ticker status
service owamp-server status
service perfsonar-lsregistrationdaemon status

If they are not running you may start them with appropriate service commands as a root user. For example:

service pscheduler-scheduler start
service pscheduler-runner start
service pscheduler-archiver start
service pscheduler-ticker start
service owamp-server start
service perfsonar-lsregistrationdaemon start

Note that you may have to wait a few hours for NTP to synchronize your clock before (re)starting owamp-server.

Configuration

Configuring perfSONAR through the web interface

After installing the perfsonar-toolkit bundle, you can refer to the general perfSONAR configuration from :doc:`install_config_first_time`.

Upgrading from 4.4.x

If you had installed a perfSONAR 4.4.x bundle and you now want to upgrade to perfSONAR 5.0, you'll have to follow the instructions here below. This will only work for Debian and Ubuntu versions supported on both releases, i.e. Debian 10 and Ubuntu 18.

Upgrade the perfSONAR installation

If you have auto-update enabled and already using the perfsonar-release.list APT source file (as was instructed when installing 4.4), you should receive the 5.0 upgrade automatically. However, because of some dependency changes and repository name change, the full upgrade need to be done manually.

If this is the case or you don't use the auto-update feature, to upgrade your perfsonar installation, you need to run:

apt update
apt dist-upgrade

The measurements and the measurement archives that you already have defined in your 4.4.x installation will be migrated to the 5.0 toolkit automatically.

Note

You might see apt issuing a warning about conflicting distribution with a message like W: Conflicting distribution: http://downloads.perfsonar.net/debian perfsonar-release InRelease (expected perfsonar-4.4 but got perfsonar-5.0) This is expected and can be ignored because you indeed are upgrading from 4.4 to 5.0.

Upgrade to another bundle

If you want to move from the perfsonar-testpoint bundle to another bundle that we provide for Debian, you can do so by following the instructions above from :ref:`install_debian_step2`.

Upgrade from Ubuntu 18 to Ubuntu 20

If you have a perfSONAR host running Ubuntu 18 and you want to upgrade it to 20, we recommend you to follow the following steps:

  • Upgrade Ubuntu 18 to Ubuntu 20 (following official instructions, here are Focal Upgrades notes)
  • Reboot your system unless already done in previous step.
  • Run apt-get update; apt-get dist-upgrade to get the latest version of perfSONAR.
  • Reboot your system one last time.

Alternatively, do a fresh installation of perfSONAR on Ubuntu 20.