Getting a boot loop

[Otter9099]

I just used your repository to compile firmware for my Ender 3 Pro with BTT SKR Mini E3 V3.0 stock hodend, bmg extruder and a CR Touch probe.

I only edited the Ender_AIO_Configuration.h file and compiled. Upon first boot it loads the new firmware and then shows the Marlin AIO screen and the animation repeats every 5 secs or so but never goes to the main marlin screen. If I remove the tf card it goes to the main marlin screen and I can complete auto home. As soon as I put the card back in the slot it reboots to the boot loop. I tried restoring all default settings with no change. I tried a second card which will pull up but as soon as I try to enter a folder with gcode files to print, it reboots. Any help would be appreciated.
Ender_AIO_Configuration.zip

[thisiskeithb]

I tried a couple different SKR Mini E3 V3.0 boards here and they all boot fine with or without the SD card inserted.

I tried a second card which will pull up but as soon as I try to enter a folder with gcode files to print, it reboots.

I also cannot reproduce this.

I've rebased/updated this repo to the latest upstream Marlin and that also works fine on the boards here.

Try one/all of the following:

• Format all SD cards with the SD Association's official formatting tool
• Try some additional SD cards
• Check all your wiring
• Update to the latest EnderAIO version