Error, no UBI device selected!

[Final-Resolution]

I want to make my own firmware, but the serial port output is as follows after burning, I hope to get help, thank you!

U-Boot SPL 2019.04 (Nov 26 2021 - 20:51:43 -0800)
DRAM: 32 MiB
SPL: Unsupported Boot Device!
Trying to boot from sunxi SPI


U-Boot 2019.04 (Nov 26 2021 - 20:51:43 -0800) Allwinner Technology

CPU:   Allwinner F Series (SUNIV)
Model: George Hilliard's business card
DRAM:  32 MiB
In:    serial@1c25000
Out:   serial@1c25000
Err:   serial@1c25000
Hit any key to stop autoboot:  0
SF: Detected xt25f128b with page size 256 Bytes, erase size 64 KiB, total 16 MiB
ubi0: attaching mtd2
ubi0 error: scan_peb: bad image sequence number 968073679 in PEB 124, expected 858837755
Erase counter header dump:
        magic          0x55424923
        version        1
        ec             1
        vid_hdr_offset 64
        data_offset    128
        image_seq      968073679
        hdr_crc        0x5c0e5e7f
erase counter header hexdump:
00000000: 55 42 49 23 01 00 00 00 00 00 00 00 00 00 00 01 00 00 00 40 00 00 00 80 39 b3 a1 cf 00 00 00 00  UBI#[email protected].......
00000020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 5c 0e 5e 7f  ............................\.^.
ubi0 error: ubi_attach_mtd_dev: failed to attach mtd2, error -22
UBI error: cannot attach mtd2
UBI error: cannot initialize UBI, error -22
UBI init error 22
Please check, if the correct MTD partition is used (size big enough?)
Error, no UBI device selected!
Error, no UBI device selected!
=> <INTERRUPT>
=>