sample.dgenrc

# This is a sample .dgenrc file
# It simply sets everything to their default values
# Lines that BEGIN with a hash (#) (i.e. NOTHING before it) are comments.
# Also, everything after the "field = value" is ignored (but don't count on it)

# Note that your own RC file doesn't need to include every field like this
# one does, any ones you exclude simply have their compiled-in default values.

# Also, you can have multiple RC files, and use the -r option to dgen
# to pick the rc you want to load.

# Fields beginning with "key_" take key names. The valid key names are listed
# in the dgenrc(5) manpage.

# Fields beginning with "bool_" are boolean, i.e. they take a true or false
# value:
#  "true", "yes", any number except 0: true 
#  "false", "no", "0"                : false

# Fields beginning with "int_" take a _positive_ integer. Simple enough, huh? ;)

# The syntax and fields of this file are documented in a bit more detail in the
# dgenrc(5) manpage.

# These are the controls for pad 1
key_pad1_up = up
key_pad1_down = down
key_pad1_left = left
key_pad1_right = right
key_pad1_a = a
key_pad1_b = s
key_pad1_c = d
key_pad1_x = q
key_pad1_y = w
key_pad1_z = e
key_pad1_mode = backspace
key_pad1_start = return

# If you prefer W.A.S.D type controls (again player 1):
#key_pad1_up = w
#key_pad1_down = s
#key_pad1_left = a
#key_pad1_right = d
#key_pad1_a = j
#key_pad1_b = k
#key_pad1_c = l
#key_pad1_x = u
#key_pad1_y = i
#key_pad1_z = o
#key_pad1_mode = backspace
#key_pad1_start = return

# Joystick/joypad definitions for pad 1
# Defaults are tailored for Gravis GamePad Pros. (10 button)
joy_pad1_up = joystick0-axis1-min
joy_pad1_down = joystick0-axis1-max
joy_pad1_left = joystick0-axis0-min
joy_pad1_right = joystick0-axis0-max
joy_pad1_a = joystick0-button0
joy_pad1_b = joystick0-button3
joy_pad1_c = joystick0-button1
joy_pad1_x = joystick0-button6
joy_pad1_y = joystick0-button4
joy_pad1_z = joystick0-button5
joy_pad1_mode = joystick0-button9
joy_pad1_start = joystick0-button8

# The same for pad 2
# Yes, I KNOW the default player 2 keys are awful. Pick your own!
key_pad2_up = kp_up
key_pad2_down = kp_down
key_pad2_left = kp_left
key_pad2_right = kp_right
key_pad2_a = delete
key_pad2_b = end
key_pad2_c = page_down
key_pad2_x = insert
key_pad2_y = home
key_pad2_z = page_up
key_pad2_mode = kp_plus
key_pad2_start = kp_enter

# Joystick/joypad definitions for pad 2
# Defaults are tailored for Gravis GamePad Pros. (10 button)
joy_pad2_up = joystick1-axis1-min
joy_pad2_down = joystick1-axis1-max
joy_pad2_left = joystick1-axis0-min
joy_pad2_right = joystick1-axis0-max
joy_pad2_a = joystick1-button0
joy_pad2_b = joystick1-button3
joy_pad2_c = joystick1-button1
joy_pad2_x = joystick1-button6
joy_pad2_y = joystick1-button4
joy_pad2_z = joystick1-button5
joy_pad2_mode = joystick1-button9
joy_pad2_start = joystick1-button8

# Fix checksum, needed by some games with Game Genie codes
key_fix_checksum = f1
joy_fix_checksum = ''

# Quit DGen or switch to the next ROM on the command-line.
key_quit = escape
joy_quit = ''
# Toggle crap-tv
key_craptv_toggle = f5
joy_craptv_toggle = ''
# Toggle scaling algorithm.
key_scaling_toggle = f6
joy_scaling_toggle = ''
# Screenshot
key_screenshot = f12
joy_screenshot = ''
# Reset Genesis
key_reset = tab
joy_reset = ''
# Toggle fullscreen mode
key_fullscreen_toggle = alt-enter
joy_fullscreen_toggle = ''

# Use this to toggle which CPU core to use, no need to reset!  :)
# If you don't have multiple CPU cores, it won't do anything!
key_cpu_toggle = f11
joy_cpu_toggle = ''

# Same as above, for Z80 core.
key_z80_toggle = f10
joy_z80_toggle = ''

# This pauses emulation :)
key_stop = z
joy_stop = ''

# Display interactive prompt.
key_prompt = :
joy_prompt = ''

# This prompts for a Game Genie code.
key_game_genie = f9
joy_game_genie = ''

# Press this to break into the debugger.
key_debug_enter = `
joy_debug_enter = ''

# Pick save slot
key_slot_0 = 0
key_slot_1 = 1
key_slot_2 = 2
key_slot_3 = 3
key_slot_4 = 4
key_slot_5 = 5
key_slot_6 = 6
key_slot_7 = 7
key_slot_8 = 8
key_slot_9 = 9
joy_slot_0 = ''
joy_slot_1 = ''
joy_slot_2 = ''
joy_slot_3 = ''
joy_slot_4 = ''
joy_slot_5 = ''
joy_slot_6 = ''
joy_slot_7 = ''
joy_slot_8 = ''
joy_slot_9 = ''
# Save/load game to current slot
key_save = f2
key_load = f3
joy_save = ''
joy_load = ''

# VDP plane debugging.
# Won't do anything unless VDP debugging is enabled at compile time.
bool_vdp_hide_plane_a = no
bool_vdp_hide_plane_b = no
bool_vdp_hide_plane_w = no
bool_vdp_hide_sprites = no
# Sprites boxing also requires VDP debugging.
bool_vdp_sprites_boxing = false
int_vdp_sprites_boxing_fg = 0xffff00 # yellow
int_vdp_sprites_boxing_bg = 0x00ff00 # green

# There are now multiple CTV effects to try. Pick your favorite:
#  off       - No CTV
#  blur      - Blur bitmap (this is the CTV from older versions)
#  scanline  - Attenuate every other scanline, by Phillip K. Hornung <redx@pknet.com>
#  interlace - Unstable crappy television (I had one that looked like this ;), by me!
#  swab      - Swap video output endianness.
ctv_craptv_startup = off

# M68K and Z80 cores to use at startup.
emu_m68k_startup = musa
emu_z80_startup = cz80

# These decide whether DGen should automatically load slot 0 on startup,
# and/or autosave to slot 0 on exit.
bool_autoload = no
bool_autosave = no

# When true, automatically dump the current configuration to dgenrc.auto before
# exiting. This file is always loaded before dgenrc at startup.
bool_autoconf = yes

# Skip frames to keep time? (faster, but can make things look bad)
# This doesn't matter if you have sound enabled, since the sound code has its
# own frameskipping
bool_frameskip = yes
# Show cartridge header info at startup.
bool_show_carthead = no

# Directory where DGen should look for ROMs by default. It's relative to
# DGen's home directory, unless an absolute path is provided.
str_rom_path = "roms"

# Sound?
bool_sound = yes
# The sound rate to use.
int_soundrate = 44100
# Number of sound segments to use for sound buffering. Lower values guarantee
# low latency. Increment this only if the sound becomes choppy.
int_soundsegs = 8
# Size of the system sound buffer, in samples (samples are the sound unit,
# sound rate is how many of them are played every second).  Specifying 0
# automatically choses the safest value. If you experience sound issues
# int_soundsegs is unable to solve, try to change this. Increasing it will
# cause noticeable audio lag (it is unfortunately often required on slower
# machines).
int_soundsamples = 0

# MJazz option - puts 2 more FM chips in the Megadrive for a sort of 22 channel
# sound boost. Can sound good. Slows things down a lot.
bool_mjazz = no

# Volume level, in percent.
int_volume = 100

# Volume control.
key_volume_inc = '='
key_volume_dec = '-'
joy_volume_inc = ''
joy_volume_dec = ''

# Binding arbitrary actions is also supported. In the following example,
# pressing button 2 of the first joystick loads a ROM:
#
#bind_j0-b2 = 'load test_rom.bin'
#
# Unbinding dangerous keys defined by default (quit and reset) and rebinding
# them using combinations.
#
# Buttons 3, 4 and 6 of the first joystick must be pressed simultaneously to
# quit:
#
#key_quit = ''
#joy_quit = ''
#bind_'j0-b3 j0-b6 j0-b4' = joy_quit
#
# Button 3 of the first joystick and keys "q" "w" and "e" must be pressed
# simultaneously to reset the console:
#
#key_reset = ''
#joy_reset = ''
#bind_'j0-b3 q w e' = joy_reset

# This is how many microseconds DGen should sleep every frame. Even little
# amounts can decrease CPU overhead significantly, and the default of 20
# doesn't hurt performance terribly. Of course, set it to 0 if you don't
# mind DGen eating all your CPU (like me ;)
int_nice = 0

# Desired window width and height.
int_width = -1
int_height = -1

# Color depth (bits per pixel). Allowed values are 0 (automatic), 8, 15, 16,
# 24 and 32. Ignored in OpenGL mode.
int_depth = 0

# Video refresh rate. The default is 60 as in NTSC consoles.
int_hz = 60

# When true, a PAL console is emulated. This should be used in combination
# with int_hz above for 50Hz emulation.
bool_pal = false

# Region to emulate: U for America (NTSC), E for Europe (PAL),
# J for Japan (NTSC), X for Japan (PAL), or empty space for autodetection
# (the default).
# Overrides bool_pal and int_hz.
region = ' '

# Regions DGen is allowed to emulate when autodetection is enabled,
# ordered by preference.
str_region_order = JUEX

# Run fullscreen?
bool_fullscreen = no

# Prevent screen tearing.
bool_doublebuffer = yes

# Additional thread to offload the displaying of frames in specific cases,
# see dgenrc.5.
bool_screen_thread = no

# If you want to increase the size of the rendered screen, increase this value.
# It currently must be a whole number. See scaling filters.
int_scale = -1
int_scale_x = -1
int_scale_y = -1

# Display the current number of frames per second.
bool_fps = false

# Display pressed buttons. Can be used to help configuring them.
bool_buttons = false

# Swap bytes in the video output.
bool_swab = false

# Scaler to use when display resolution is larger than original screen.
# Choose between "stretch", "scale", "hqx", "hqx stretch", "scale2x",
# "scale2x stretch" and "none".
scaling_startup = stretch

# Use a joystick?
bool_joystick = yes

# Number of milliseconds to wait after the last mouse motion event to release
# buttons bound to such events.
int_mouse_delay = 50

# Use OpenGL mode?
bool_opengl = yes

# Let OpenGL stretch the screen.
bool_opengl_stretch = yes

# Retain original aspect ratio when resizing window.
bool_aspect = true

# Use GL_LINEAR for textures filtering instead of GL_NEAREST.
bool_opengl_linear = true

# Use 32 bit textures. They require more memory but are usually faster than
# 16 bit textures.
bool_opengl_32bit = true

# Use a square OpenGL texture. Wastes memory.
bool_opengl_square = false

# Height of the text area at the bottom of the screen, in pixels.
int_info_height = -1

# Generate unfiltered screenshots.
bool_raw_screenshots = false

# The following variables aren't supported anymore. They have been replaced
# with the joy_* bindings. They are still mentioned here to help convert
# existing configuration files.
#
# Specifying joysticks identifiers, axes and buttons separately isn't required
# anymore, because each joy_* binding provides all the necessary information
# using the following format (see dgenrc.5):
#
# joy_padX_{control} = joystick{X}-button{Y}
# joy_padX_{control} = joystick{X}-axis{Y}-(min|max)
# joy_padX_{control} = joystick{X}-hat{Y}-{direction}
#
# This allows more than a single joystick/joypad to manage a game controller,
# bind joystick/joypad axes to arbitrary actions, and a single joystick/joypad
# event to several actions.
#
# Additionally, you can use the "calibrate" command to define controls easily.
#
# Joystick device selection.
#int_joystick1_dev = 0 # not supported anymore
#int_joystick2_dev = 1 # not supported anymore
#
# Joystick axes.
#int_joystick1_axisX = 0 # not supported anymore
#int_joystick1_axisY = 1 # not supported anymore
#int_joystick2_axisX = 0 # not supported anymore
#int_joystick2_axisY = 1 # not supported anymore
#
# Don't reverse axes by default
#bool_joystick1_axisX = false # not supported anymore
#bool_joystick1_axisY = false # not supported anymore
#bool_joystick2_axisX = false # not supported anymore
#bool_joystick2_axisY = false # not supported anymore
#
# Joypad 1
#joypad1_b0 = A # not supported anymore
#joypad1_b1 = C # not supported anymore
#joypad1_b2 = A # not supported anymore
#joypad1_b3 = B # not supported anymore
#joypad1_b4 = Y # not supported anymore
#joypad1_b5 = Z # not supported anymore
#joypad1_b6 = X # not supported anymore
#joypad1_b7 = X # not supported anymore
#joypad1_b8 = START # not supported anymore
#joypad1_b9 = MODE # not supported anymore
#joypad1_b10 = # not supported anymore
#joypad1_b11 = # not supported anymore
#joypad1_b12 = # not supported anymore
#joypad1_b13 = # not supported anymore
#joypad1_b14 = # not supported anymore
#joypad1_b15 = # not supported anymore
#
# Joypad 2
#joypad2_b0 = A # not supported anymore
#joypad2_b1 = C # not supported anymore
#joypad2_b2 = A # not supported anymore
#joypad2_b3 = B # not supported anymore
#joypad2_b4 = Y # not supported anymore
#joypad2_b5 = Z # not supported anymore
#joypad2_b6 = X # not supported anymore
#joypad2_b7 = X # not supported anymore
#joypad2_b8 = START # not supported anymore
#joypad2_b9 = MODE # not supported anymore
#joypad2_b10 = # not supported anymore
#joypad2_b11 = # not supported anymore
#joypad2_b12 = # not supported anymore
#joypad2_b13 = # not supported anymore
#joypad2_b14 = # not supported anymore
#joypad2_b15 = # not supported anymore