update-modules

#!/bin/sh
#+
#  Name:
#     update-modules

#  Purpose:
#     Update or initialise the git submodules

#  Type of Module:
#     Bourne shell script

#  Usage:
#     update-modules [-f] [submodule]

#  Description:
#     This script attempts to safely update or initialise the content of all
#     the submodules or the given submodule. It should be ran whenever a
#     submodule is known to be out-of-date, or when the submodules have not
#     yet been initialised. It can also be run at other times to get a listing
#     of the submodules and their status.
#
#     The script can update or initialise a single submodule, or if no
#     command-line argument is given all the known submodules. Note that after
#     any new submodules are added to the repository these must be made known
#     by a git-pull or git-fetch before running this script.
#
#     If any of the submodules contain local changes then this script will
#     refuse to run as the update process is destructive (although most
#     committed changes will be recoverable, see git-reflog). Note this means
#     that no changes to any submodules will be made, regardless of whether
#     they could be updated and/or initialized or not until the problem has
#     been resolved.
#
#     In extreme circumstances when you do not have any changes to preserve
#     the "-f" flag can be used to skip all safety checks.
#
#     It is necessary that this script be ran at least once after a
#     repository clone is created. This will be done by the bootstrap
#     script.

#  Notes:
#     Recovering after errors: If a submodule fails to clone (typical causes
#     are usually network errors or badly configured git) on the initial
#     update the container directory can often be automatically removed. In
#     that case you'll need to re-create it before updating will succeed. It
#     can also be a good idea to remove the partial repository that a failed
#     clone can give you, so for instance if the Perl module failed to clone
#     you should do:
#
#         rm -rf thirdparty/perlsys/perl/perl
#         mkdir thirdparty/perlsys/perl/perl
#
#     before attempting to continue.

#  Authors:
#     PWD: P.W. Draper (JAC, Durham University)
#     {enter_new_authors_here}

#  Copyright:
#     Copyright (C) 2009 Science and Technology Facilities Council.
#     All Rights Reserved.

#  Licence:
#     This program is free software; you can redistribute it and/or
#     modify it under the terms of the GNU General Public License as
#     published by the Free Software Foundation; either version 2 of the
#     License, or (at your option) any later version.
#
#     This program is distributed in the hope that it will be
#     useful, but WITHOUT ANY WARRANTY; without even the implied warranty
#     of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
#     GNU General Public License for more details.
#
#     You should have received a copy of the GNU General Public License
#     along with this program; if not, write to the Free Software
#     Foundation, Inc., 51 Franklin Street,Fifth Floor, Boston, MA
#     02110-1301, USA

#  History:
#     10-FEB-2009: (PWD):
#        Original version.
#     {enter_further_changes_here}

#-

echo ""
echo "Updating local repository submodules:"

#  Parse any command-line arguments. We just have two -f and/or a submodule.

check=1
if test "$1" != ""; then
   if test "$1" = "-f"; then
      check=0
      shift
   fi
   submodule="$1"
else
   submodule=""
fi

#  Get a summary of the submodules. If this returns any content then one or
#  more have been modified and/or committed and may need to be pushed or reset
#  before proceeding. Could also mean that the module just needs updating.

summary=`git submodule summary $submodule`
if test "$check" = "1" -a "$summary" != ""; then

   #  Check for modules that have modifications committed.
   git ls-files --stage -- $submodule | grep '^160000 ' |
      while read mode sha1 stage path; do
         if git diff-files --quiet -- "$path"; then
            #  Submodule is unmodified.
            :
         else
            #  Submodule is modified. Either internally, needs an update
            #  or could be missing.
            if test -d $path; then
               #  We want to check internally, ask submodule if it has the
               #  requested SHA as its head, if not it may need an update.
               if GIT_DIR=$path/.git git rev-parse --verify $sha1^0 >/dev/null 2>&1; then

                  #  Contains the requested SHA already, that's OK as long
                  #  as the branch isn't ahead of the remote tracked version.
                  #  If we're not on a branch then there's no test available.
                  branch=`GIT_DIR=$path/.git git symbolic-ref HEAD 2>/dev/null | sed 's,refs/heads/,,'`
                  if test "$branch" != ""; then
                     ahead=`GIT_DIR=$path/.git git log origin/$branch..$branch 2>/dev/null`
                     if test "$ahead" != ""; then
                        echo "ERROR: a submodule is ahead of remote branch, not updating anything"
                        echo "... $path"
                        echo "    `git submodule summary $path`"
                        exit 1
                     fi
                  fi
               fi
            else
               #  No directory! That's an error.
               echo "ERROR: missing submodule directory, not updating anything"
               echo "... $path"
               exit 1
            fi
         fi
      done
   if test "$?" != "0"; then
      #  Last command in sub-shell exited in error. So stop.
      exit 1
   fi
fi

#  The above will not report modified files that have not been committed.
#  This isn't important, but probably indicates some activity in the submodule
#  so refuse to proceed when they are present as well.

if test "$submodule" = ""; then
   #  Get a list of all the paths to the submodules.
   submodule_list="`git config -f .gitmodules --get-regexp '.*\.path$' | awk '{print $2}'`"
else
   submodule_list="$submodule"

   #  Verify this a submodule, which may not be initialised yet.
   found="`git config -f .gitmodules --get-regexp ".*${submodule}\.path$" | awk '{print $2}'`"
   if test "$found" = ""; then
      echo "ERROR: no such submodule: ... $submodule"
      exit 1
   fi
fi

if test "$check" = "1"; then
   for m in $submodule_list; do

      if test -d "$m"; then

         #  May not be checked in yet, so no repository in place. Check that
         #  by counting the files, must be more than ". ..", if this is a
         #  submodule.
         nfiles=`cd $m && ls -a | wc -w`
         if test $nfiles -gt 2 ; then
            (cd $m && git diff) >/dev/null 2>&1 ; # XXX hack need to update submodule index?

            #  Check for local modifications. Force this command to use the
            #  submodule repository, not the current one. If this is really a
            #  repository that is OK, otherwise (i.e bad repository, none
            #  repository files present) an error will occur.
            modified=`cd $m && git --git-dir .git diff-index --name-status HEAD 2>&1`
            if test "$?" != "0"; then
               echo "ERROR: submodule repository query failed, not updating anything"
               echo "... $m"
               echo "    $modified"
               exit 1
            fi
            if test "$modified" != ""; then
               echo "ERROR: submodule has modified files, not updating anything"
               echo "... $m"
               echo "    $modified" | head
               exit 1
            fi
         else
            echo "... $m requires initialisation"
         fi
      else
         echo "ERROR: submodule directory is missing, not updating anything"
         echo "... $m"
         exit 1
      fi
   done
fi

#  No modifications, or told to not check, so safe to check for updates. Note
#  we always init to capture any new submodules added since the last update.

git submodule init $submodule
if test "$?" != "0"; then
   echo "ERROR: failed to initialise a submodule"
   exit 1
fi

git submodule update $submodule
if test "$?" != "0"; then
   echo "ERROR: failed to update a submodule"
   exit 1
fi

#  Success output the status of the submodules.
git submodule status $submodule | awk '{print "...",$2,$3}'
echo ""

exit