Makefile.am

## Process this file with automake to produce Makefile.in

# These are made, in order presented, from the toplevel make
SUBDIRS = libdieharder dieharder include manual

EXTRA_DIST = autogen.sh Copyright dieharder.abs

#========================================================================
# This is the toplevel Makefile for the dieharder project.  It has
# some specialized targets:
#
# make          alone should build the entire application as usual
# make install  should install it.  Use configure --prefix= to specify
#               a toplevel path other than the default /usr.
#
# make tgz      makes $(TGZ) of entire tree for standalone or rpm build
# make rpm      makes $(RPM) packages built by dieharder.spec
#
#========================================================================
PROJECT = dieharder
LIBRARY = libdieharder
LIBTIME = libwulf.time
INCTIME = include.time
PROGRAM = dieharder
PROGTIME = dieharder.time
MANUAL = manual
MANTIME = manual.time
RDIEHARDER = RDieHarder

#========================================================================
# Constructs used in project maintenance and installation.
#
# The destination on an ssh-accessible remote webserver $(WLOGIN),
# used as:
#    $(HOME)/public_html/$(WDIR)
#========================================================================
WLOGIN = ganesh.phy.duke.edu
WDIR = General
ABS = $(PROJECT).abs
PHP = $(PROJECT).php


#========================================================================
# This is revision information, automagically set from autoconf.  The
# actual version information is set ONLY in configure.ac
#========================================================================
VERSION=@VERSION@
RELEASE=@RELEASE@
LITTLE_ENDIAN=@LITTLE_ENDIAN@

#========================================================================
# RPM/tarball target objects.  We need rules for all of these.
#========================================================================
PROJECTDIR = $(PROJECT)-$(VERSION)
TAR = $(PROJECTDIR).tar
TGZ = $(PROJECTDIR).tgz
SPEC = $(PROJECT).spec

#========================================================================
# List of variants one can make.  all is the default.  We always
# presume the simplest of dependencies and remake if includes change
# for example.
#========================================================================
all: $(LIBTIME) $(PROGTIME) $(INCTIME)

# This is not, actually, a particularly useful toplevel target.  To
# work correctly it also would require a full parsing of all
# lower level dependencies.  I'm leaving it in for the moment just
# to have a default target at the toplevel that CAN be used to test.
$(LIBTIME):
	(cd $(LIBRARY); \
	make)

$(INCTIME):
	(cd include; \
	make)

$(PROGTIME):
	(cd $(PROGRAM); \
	make)

$(ABS): Makefile
	cat $(ABS) | \
	sed -e 's/^\(<center><H2>Version \)\(.*\)/\1$(VERSION)<\/H2><\/center>/' > /tmp/$(ABS).$$
	mv /tmp/$(ABS).$$ $(ABS)

#========================================================================
# This is a required target for both its own sake and to support the
# rpm build.  It has to run unconditionally when called.  Note that we
# make PRECISELY what we need in terms of the source directories,
# excluding all restricted material and irrelevant data.
#========================================================================
tgz: Makefile COPYING Copyright NOTES README $(SPEC) $(ABS) $(PHP)
	( rm -rf $(TAR) $(TGZ) $(PROJECTDIR); \
	mkdir -p $(PROJECTDIR); \
	cd $(LIBRARY); \
	make clean; \
	cd ..; \
	cp -r $(LIBRARY) $(PROJECTDIR); \
	cd $(PROGRAM); \
	make clean; \
	cd ..; \
	cp -r $(PROGRAM) $(PROJECTDIR); \
	cd $(MANUAL); \
	make clean; \
	cd ..; \
	cp -r $(MANUAL) $(PROJECTDIR); \
	cp -r include $(PROJECTDIR); \
	cp -r m4 $(PROJECTDIR); \
	cp $(ABS) $(PROJECTDIR); \
	cp $(PHP) $(PROJECTDIR); \
	cp Makefile $(PROJECTDIR); \
	cp Makefile.am $(PROJECTDIR); \
	cp Makefile.in $(PROJECTDIR); \
	cp configure $(PROJECTDIR); \
	cp config.h.in $(PROJECTDIR); \
	cp $(SPEC).in $(PROJECTDIR); \
	cp dieharder_version.h.in $(PROJECTDIR); \
	cp dieharder.html.in $(PROJECTDIR); \
	cp dieharder-config.in $(PROJECTDIR); \
	cp autogen.sh $(PROJECTDIR); \
	cp missing $(PROJECTDIR); \
	cp aclocal.m4 $(PROJECTDIR); \
	cp mkinstalldirs $(PROJECTDIR); \
	cp ltmain.sh $(PROJECTDIR); \
	cp depcomp $(PROJECTDIR); \
	cp configure $(PROJECTDIR); \
	cp configure.ac $(PROJECTDIR); \
	cp config.guess $(PROJECTDIR); \
	cp config.sub $(PROJECTDIR); \
	cp config.status $(PROJECTDIR); \
	cp install-sh $(PROJECTDIR); \
	cp Copyright $(PROJECTDIR); \
	cp COPYING $(PROJECTDIR); \
	cp INSTALL $(PROJECTDIR); \
	cp AUTHORS $(PROJECTDIR); \
	cp NEWS $(PROJECTDIR); \
	cp ChangeLog $(PROJECTDIR); \
	cp README $(PROJECTDIR); \
	cp NOTES $(PROJECTDIR); \
	tar -cvpf $(TAR) \
	    --exclude=.git \
	    --exclude=Cruft \
	    --exclude=Exclude \
	    --exclude=*.tar \
	    --exclude=*.tgz \
	    --exclude=*.rpm \
	    ./$(PROJECTDIR); \
	gzip $(TAR); \
	mv $(TAR).gz $(TGZ); \
	rm -rf $(PROJECTDIR))

LIBTOOL_DEPS = @LIBTOOL_DEPS@
libtool: $(LIBTOOL_DEPS)
	$(SHELL) ./config.status --recheck

#========================================================================
# rpm target special stuff
#
# To work in userspace, add the following:
# %_topdir	/home/rgb/Src/redhat
# to your personal $(HOME)/.rpmmacros after building
# yourself a private copy of the /usr/src/redhat directory structure.
#
# RPM_TOPDIR=/usr/src/redhat
RPM_TOPDIR=$(HOME)/Src/rpm_tree

# This is needed to get the right library and binary rpm.
ARCH=`uname -i`
# ARCH=i386
# These are the three rpms automagically built by the spec
SSRPM = $(PROJECT)-src-$(VERSION)-$(RELEASE).src.rpm
SRPM = $(PROJECT)-$(VERSION)-$(RELEASE).src.rpm
LRPM = libdieharder-$(VERSION)-$(RELEASE).$(ARCH).rpm
PRPM = dieharder-$(VERSION)-$(RELEASE).$(ARCH).rpm

$(TGZ): tgz
$(SRPM): rpm
$(LRPM): rpm
$(PRPM): rpm

#========================================================================
# One stop shop.  Basically we build this every time, we hope.
rpm:	Makefile $(TGZ)
	rm -rf /var/tmp/dieharder*
	cp $(TGZ) $(RPM_TOPDIR)/SOURCES
	cp $(SPEC) $(RPM_TOPDIR)/SPECS
	rpmbuild -ba --target=$(ARCH) $(RPM_TOPDIR)/SPECS/$(SPEC)
	cp $(RPM_TOPDIR)/SRPMS/$(SSRPM) $(SRPM)
	cp $(RPM_TOPDIR)/RPMS/$(ARCH)/$(LRPM) .
	cp $(RPM_TOPDIR)/RPMS/$(ARCH)/$(PRPM) .

#========================================================================
# This target takes the dieharder sources and "magically" transforms
# them into RDieHarder sources.
RDHTAR=RDieHarder_@VERSION@.tar
RDHPKG=RDieHarder_@VERSION@.tar.gz

$(RDHPKG): rdhpkg

rdhpkg:
	rm -rf RDieHarder/src/*.h RDieHarder/src/*.c \
	RDieHarder/src/*.o RDieHarder/src/Makefile RDieHarder/src/*.so
	cp dieharder/*.c RDieHarder/src/
	cp dieharder/*.h RDieHarder/src/
	mv RDieHarder/src/rdieharder.c RDieHarder/src/dieharder.c
	cp dieharder/Makefile.RDH RDieHarder/src/Makefile
	tar -cvpf $(RDHTAR) RDieHarder
	gzip -f $(RDHTAR)

# This can be run by anybody
rdhclean:
	rm -rf RDieHarder/src/*.h RDieHarder/src/*.c $(RDHTAR) $(RDHPKG) \
	RDieHarder/src/*.o RDieHarder/src/Makefile RDieHarder/src/*.so

# This can be run as anybody
rdhprep:
	rm -rf RDieHarder/src/*.h RDieHarder/src/*.c \
	RDieHarder/src/*.o RDieHarder/src/Makefile RDieHarder/src/*.so
	cp dieharder/*.c RDieHarder/src/
	cp dieharder/*.h RDieHarder/src/
	mv RDieHarder/src/rdieharder.c RDieHarder/src/dieharder.c
	cp dieharder/Makefile.RDH RDieHarder/src/Makefile

# This has to be run only as root, sorry.
rdh:	$(RDHPKG)
	R CMD INSTALL $(RDHPKG)